If your GE dryer has stopped heating, stopped tumbling or started throwing an error code, the technician you call should know the model line. The St. Ann list starts with companies that name GE, followed by other appliance repair companies that list dryer work.
Washer and Dryer Repair is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dryers and other brands.
Who Works on GE Dryers Near St. Ann
40 repair companies serve St. Ann from within 30 miles. Other nearby bases include St. Louis (19), Florissant (4), and Hazelwood (3). The farthest listed company is about 12 miles out. The closest is Old School Appliance Repair, about 1.1 miles away. No company within 30 miles of St. Ann names GE in its listing, so the list adds matches from farther out and the closest appliance repair companies. The 29 rated companies in range average 4.1 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Distance to the three closest (mi) | 1.1, 2.1, 2.1 |
|---|---|
| List dryer or washer & dryer work | 14 |
| Repair companies inside 30 miles | 60 |
| With 4.5+ stars and at least 10 reviews | 17 |
| Mention GE | 0 |
| Open on Saturdays (per listing) | 42 |
At the top of the St. Ann list: Sears Appliance Repair (74.1 miles away, based in Perryville, 4.6 stars from 132 reviews, lists Saturday hours); Sears Appliance Repair (69.2 miles away, based in Jacksonville, 4.3 stars from 45 reviews, lists Saturday hours); Sears Appliance Repair (85.8 miles away, based in Mexico, 4.3 stars from 34 reviews, lists Saturday hours); All American Appliance and HVAC Services (4.7 miles away, based in St. Louis, 4.7 stars from 2,771 reviews, lists Saturday hours).
GE Dryer Lines and Features
What a GE Dryer Technician Deals With
Sensor dry models must sit level so tumbling clothes contact the moisture sensors; an unlevel dryer can end cycles with clothes still damp. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
GE Dryer Symptoms and First Checks
- Check Vent alert. GE says to unplug the dryer, disconnect and vacuum the duct, and make sure the outside hood damper moves freely. Source: GE Appliances - Dryer - Check Vent Sensor Alert
- Dryer will not run or start. GE's first check is that the dryer plug is pushed fully into the wall outlet. Source: GE Appliances - Dryer - Will Not Run or Start
What GE Dryer Codes Mean
| Code | What it means |
|---|---|
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
When to Call for GE Dryer Repair
- Squealing, thumping or grinding while it runs
- Burning or hot smell during a cycle
- Drum will not turn even though you hear a hum
What Gets Fixed on a St. Ann Dryer Call
Keeping a GE Dryer Running
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
- Inspect and clean the exhaust duct at least once a year by unplugging the dryer, disconnecting the duct and vacuuming it, and check that the outside hood flaps move freely with no nests inside. Source: GE Appliances - Dryer - How to Clean Exhaust / Vent Duct
Brand guides: GE Dryer Not Heating: What to Check.
What GE Dryer Repairs Cost
Price the repair before replacing a GE dryer. Published ranges for common jobs:
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair (most homeowners): $100–$430 Source: Angi - How Much Does Dryer Repair Cost?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a GE Dryer Call
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- How long the vent run is and where it exits the house
- The brand, model and serial number from the label inside the door or on the back panel
Local Notes for St. Ann
Most dryer calls in St. Ann come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Gas appliance and mechanical trade credentials are issued by local governments; Kansas City, for example, certifies gas-fired appliance supervisors, mechanical supervisors and master pipe fitters. Source: KCMO BizCare: Contractor Licensing
In Missouri, you can report a problem to the Missouri Attorney General's Office, Consumer Protection.
Before You Book in St. Ann
- Can you give a written estimate before ordering parts?
- If a part has to be ordered, how soon can you come back to finish?
- What is the service call or diagnostic fee, and is it applied to the repair?
GE Dryer Repair FAQs: St. Ann, MO
What makes a dryer stop heating?
How do I find a technician who knows GE dryers?
What should I do about a GE error code?
Why does my dryer take so long to dry?
Other Dryer Repair in St. Ann
More GE Dryer Repair Pages Nearby
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a GE repair.