Serving Columbus, Nebraska and nearby areas Helpline · (888) 772-9805
☎(888) 772-9805Call

GE Dryer Repair in Columbus, NE

A local list of independent GE dryer technicians for Columbus and the Platte County area, plus a helpline that connects you with one.

Need GE dryer repair near Columbus?
Call our helpline to be connected with an independent technician who repairs GE dryers.
☎(888) 772-9805
✓10 companies listed for Columbus✓Independent, not a manufacturer✓Public ratings & distances

GE owners in Columbus usually want two things from a repair company: experience with the brand and quick access to parts. The Columbus list starts with companies that name GE, followed by other appliance repair companies that list dryer work.

This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.

Who Works on GE Dryers Near Columbus

We found 26 appliance repair companies within 60 miles of Columbus. 2 of them are based in Columbus itself, and other nearby bases include Lincoln (12), Fremont (5), and Norfolk (3). Distances run up to about 59 miles. Nearest on the list: Don's Appliance Services, around 0.6 miles out. No company within 60 miles of Columbus names GE in its listing, so the list adds matches from farther out and the closest appliance repair companies. Rated companies nearby average 4.1 stars across 22 businesses. Columbus is a smaller market, so expect a longer drive and ask whether a trip charge applies.

Mentions GE
Sears Appliance Repair
1200 N 6th St, Beatrice, NE 68310
86.2 mi from Columbus
★★★★ 4.0 (9 reviews)
DryersWashersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
1690 E 23rd St, Fremont, NE 68025
45.6 mi from Columbus
★★★★★ 4.8 (16 reviews)
DryersWashersSaturday hours
Washer & Dryer Repair
Mr. Appliance of West Omaha
20330 Veterans Dr Ste 1B, Elkhorn, NE 68022
59.4 mi from Columbus
★★★★★ 4.8 (309 reviews)
DryersWashersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
2110 Market Ln, Norfolk, NE 68701
40.7 mi from Columbus
★★★★½ 4.4 (21 reviews)
DryersWashersSaturday hours
Appliance Repair
Don's Appliance Services
2720 13th St, Columbus, NE 68601
0.6 mi from Columbus
★★★ 3.0 (1 review)
Saturday hours
Appliance Repair
Service Guard
929 23rd St E, Columbus, NE 68601
2.0 mi from Columbus
★★★★★ 5.0 (2 reviews)
Saturday hours
Appliance Repair
Andy's Appliance Repair
3001 O St, Lincoln, NE 68510
55.7 mi from Columbus
★★★★★ 4.8 (1,140 reviews)
Saturday hours
Washer & Dryer Repair
Sears Appliance Repair
6400 O St, Lincoln, NE 68510
57.1 mi from Columbus
★★★★ 3.9 (151 reviews)
DryersWashersSaturday hours
Appliance Repair
Scratch and Dent Appliances Of Fremont
1580 Proctor St, Fremont, NE 68025
45.5 mi from Columbus
★★★★★ 4.8 (50 reviews)
Saturday hours
Washer & Dryer Repair
Metro TV & Appliances
1107 N Cotner Blvd, Lincoln, NE 68505
56.6 mi from Columbus
★★★★ 4.2 (358 reviews)
DryersWashers

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

Repair market snapshot: Columbus, NE
Repair companies inside 60 miles26
List dryer or washer & dryer work6
Open on Saturdays (per listing)20
Mention GE0
Three nearest companies, miles away0.6, 2.0, 38.9
With 4.5+ stars and at least 10 reviews6

Closest matches for Columbus: Sears Appliance Repair (86.2 miles away, based in Beatrice, 4.0 stars from 9 reviews, lists Saturday hours); Sears Appliance Repair (45.6 miles away, based in Fremont, 4.8 stars from 16 reviews, lists Saturday hours); Mr. Appliance of West Omaha (59.4 miles away, based in Elkhorn, 4.8 stars from 309 reviews, lists Saturday hours); Sears Appliance Repair (40.7 miles away, based in Norfolk, 4.4 stars from 21 reviews, lists Saturday hours).

⚡ Get connected with a GE dryer technician near Columbus
☎(888) 772-9805

Know Your GE Dryer

GE Profile Smart Front Load Dryers with Steam and SanitizeLarge-capacity front-load dryers with steam, a sanitize cycle and SmartHQ app connectivity.
GE Profile UltraFast ComboAn all-in-one washer/dryer that dries with ventless inverter heat pump technology, so it needs no outside vent and runs on a 120V plug.

What a GE Dryer Technician Deals With

Sensor dry models must sit level so tumbling clothes contact the moisture sensors; an unlevel dryer can end cycles with clothes still damp. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All

Common GE Dryer Problems

  • Gas dryer runs but does not heat. GE says to confirm a real drying cycle and temperature are selected, keep the front of the dryer unblocked, check the dedicated 120V outlet, and on new installs make sure the gas line is turned on. Source: GE Appliances - Gas Dryer - Runs But Does Not Heat
  • Dryer hot to the touch or sweating. GE says this usually means heat and humidity cannot escape, so clean the exhaust duct, clear the wall cap and confirm the elbow count suits the vent length. Source: GE Appliances - Dryer - Hot to the Touch or Sweats

What GE Dryer Codes Mean

CodeWhat it means
18 (UltraFast Combo)The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages
353 (UltraFast Combo)The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages
Confirm H2O Supply is ON (UltraFast Combo)No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages

GE Dryer Problems Worth a Service Call

  • Cycles take two or three runs to finish
  • Dryer shuts off a few minutes into the cycle
  • Burning or hot smell during a cycle

How a Dryer Service Call Usually Goes in Columbus

Airflow and the ventA long dry time is most often an airflow problem. A technician checks the lint screen housing, the duct behind the dryer and the exhaust hood outside before replacing any heating parts, because a restricted vent can make a healthy dryer look broken.
Power supplyElectric dryers run on a 240-volt circuit. A tripped breaker on one leg can leave the drum spinning with no heat, which is why a technician checks the outlet before ordering parts.

Keeping a GE Dryer Running

Brand guides: GE Dryer Not Heating: What to Check.

Budgeting for a GE Dryer Repair

Most GE dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:

Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?

Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.

Getting Ready for the Repair

  • The brand, model and serial number from the label inside the door or on the back panel
  • Any error code on the display
  • What happens when you press Start (no response, hum, runs with no heat, stops early)

Around Columbus

Most dryer calls in Columbus come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.

Nebraska does not license appliance repair technicians at the state level; contractors working on other people's property register with the Department of Labor, and trade licenses such as plumbing are handled by cities and villages. Source: Nebraska Department of Labor: Who Needs to Register

In Nebraska, you can check a license with the Nebraska Department of Labor contractor registration (Search Registered Contractors and Subcontractors) or report a problem to the Nebraska Attorney General, Consumer Protection Division.

How to Choose a Dryer Technician Near Columbus

  • Is your company licensed where my state requires it, and insured?
  • What is the service call or diagnostic fee, and is it applied to the repair?
  • What guarantee do you give on parts and labor?

GE Dryer Repair FAQs: Columbus, NE

What makes a dryer stop heating?
On an electric dryer the usual suspects are the heating element, a blown thermal fuse, a failed thermostat or a tripped breaker on one leg of the circuit. On a gas dryer, check that the gas is on, then the igniter and valve coils. A blocked vent can trip the safety fuse on both types, so it should be cleared first.
Is this GE customer service?
No. We are an independent directory and are not affiliated with GE. The companies listed are independent technicians. For manufacturer coverage questions, contact GE directly.
Why do my clothes come out damp?
Restricted airflow is the most common cause: a full lint screen, a crushed or kinked duct, or a clogged exhaust hood outside. Overloading and a dirty moisture sensor are next. If the vent is clear and the dryer still runs long, a technician can test the heating parts.

Other Dryer Repair in Columbus

More GE Dryer Repair Pages Nearby

Before you call, find the model and serial number on your GE dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.

One call to a GE dryer technician near you
☎(888) 772-9805
☎ Call (888) 772-9805 Talk to a tech