Most GE dryer repairs in Absecon involve the same few systems: heat, airflow, the drum drive and the controls. The Absecon list starts with companies that name GE, followed by other appliance repair companies that list dryer work.
Washer and Dryer Repair is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dryers and other brands.
Who Works on GE Dryers Near Absecon
We found 26 appliance repair companies within 30 miles of Absecon. 1 list an address in Absecon, and the rest are spread across Pleasantville (3), Galloway (3), and Somers Point (2). Distances run up to about 30 miles. Nearest on the list: C & R Appliance Services, around 1.0 miles out. No company within 90 miles of Absecon mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Across 24 rated companies, the average public rating is 4.5 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention GE | 0 |
|---|---|
| Three nearest companies, miles away | 1.0, 1.3, 1.4 |
| Appliance repair companies in range (30 mi) | 26 |
| Listing Saturday hours | 12 |
| With 4.5+ stars and at least 10 reviews | 12 |
| List dryer or washer & dryer work | 7 |
The leading options for Absecon are C and R Appliance Of Galloway Inc (5.0 miles away, based in Galloway, 4.9 stars from 69 reviews); Mr. Appliance of Atlantic and Cape May (23.7 miles away, based in Cape May Court House, 4.7 stars from 479 reviews, lists Saturday hours); Sears Appliance Repair (8.3 miles away, based in Mays Landing, 4.2 stars from 210 reviews, lists Saturday hours); Apex Appliance Repair and Air Duct Cleaning (28.4 miles away, based in Barnegat, 4.6 stars from 51 reviews, lists Saturday hours).
GE Dryer Features Technicians Work On
How GE Dryers Are Built
The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
Common GE Dryer Problems
- Dryer hot to the touch or sweating. GE says this usually means heat and humidity cannot escape, so clean the exhaust duct, clear the wall cap and confirm the elbow count suits the vent length. Source: GE Appliances - Dryer - Hot to the Touch or Sweats
- Gas dryer runs but does not heat. GE says to confirm a real drying cycle and temperature are selected, keep the front of the dryer unblocked, check the dedicated 120V outlet, and on new installs make sure the gas line is turned on. Source: GE Appliances - Gas Dryer - Runs But Does Not Heat
GE Dryer Error Codes
| Code | What it means |
|---|---|
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
When to Call for GE Dryer Repair
- Squealing, thumping or grinding while it runs
- Outside of the cabinet gets unusually hot
- Drum turns but the air stays cool
What Gets Fixed on a Absecon Dryer Call
Owner Care for GE Dryers
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
Brand guides: GE Dryer Not Heating: What to Check.
GE Dryer Repair Cost Ranges
Price the repair before replacing a GE dryer. Published ranges for common jobs:
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- The brand, model and serial number from the label inside the door or on the back panel
- Any error code on the display
- Whether the dryer is gas or electric
Dryer Notes for Absecon, NJ
Most dryer calls in Absecon come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
New Jersey has no license specific to appliance repair; plumbing work is reserved to state-licensed master plumbers, and gas piping work on the customer side of the meter falls under HVACR contractor licensing, both overseen by boards in the Division of Consumer Affairs. Source: NJ Division of Consumer Affairs: State Board of Examiners of Master Plumbers rule notice
Under state law, working on gas piping on the load side of the meter requires a master HVACR contractor license or another state license whose scope includes gas piping. Source: NJ Division of Consumer Affairs: State Board of Examiners of Master Plumbers rule notice
Hiring a Dryer Repair Company in Absecon
- Can you look at the washer on the same visit if it is acting up too?
- What guarantee do you give on parts and labor?
- Is your company licensed where my state requires it, and insured?
GE Dryer Repair FAQs: Absecon, NJ
Do you work for GE?
Why does my dryer take so long to dry?
What makes a dryer stop heating?
Is my GE dryer worth repairing?
Other Dryer Repair in Absecon
GE Dryer Repair in Nearby Cities
Before you call, find the model and serial number on your GE dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.