If your GE dryer has stopped heating, stopped tumbling or started throwing an error code, the technician you call should know the model line. The Wanaque list starts with companies that name GE, followed by other appliance repair companies that list dryer work.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
GE Dryer Repair Near Wanaque
Our data shows 40 appliance repair companies inside a 30-mile radius of Wanaque. Other nearby bases include Paterson (6), Wayne (3), and Ridgewood (3). None of the repair companies near Wanaque name GE in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. Homeguard Appliance Repair Works is the nearest, roughly 6.7 miles from Wanaque. Rated companies nearby average 4.5 stars across 32 businesses.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| List dryer or washer & dryer work | 9 |
|---|---|
| Mention GE | 0 |
| Repair companies inside 30 miles | 60 |
| Listing Saturday hours | 41 |
| With 4.5+ stars and at least 10 reviews | 12 |
| Three nearest companies, miles away | 6.7, 7.7, 7.8 |
At the top of the Wanaque list: Dan Marc Appliance (12.8 miles away, based in West Caldwell, 4.5 stars from 6,455 reviews, lists Saturday hours); Mr. Appliance of Bergen County (9.9 miles away, based in Ridgewood, 4.6 stars from 317 reviews, lists Saturday hours); Handler Appliance Inc (9.0 miles away, based in Wayne, 4.9 stars from 1,469 reviews, lists Saturday hours); A&D Appliance Repair (9.8 miles away, based in Prospect Park, 4.2 stars from 696 reviews, lists Saturday hours).
Know Your GE Dryer
What Makes GE Dryer Repairs Different
The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
GE Dryer Symptoms and First Checks
- Dryer will not run or start. GE's first check is that the dryer plug is pushed fully into the wall outlet. Source: GE Appliances - Dryer - Will Not Run or Start
- Gas dryer runs but does not heat. GE says to confirm a real drying cycle and temperature are selected, keep the front of the dryer unblocked, check the dedicated 120V outlet, and on new installs make sure the gas line is turned on. Source: GE Appliances - Gas Dryer - Runs But Does Not Heat
GE Dryer Error Codes
| Code | What it means |
|---|---|
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
GE Dryer Problems Worth a Service Call
- Drum will not turn even though you hear a hum
- Outside of the cabinet gets unusually hot
- Dryer will not start when you press Start
Inside a Dryer Repair Visit
Owner Care for GE Dryers
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
- Inspect and clean the exhaust duct at least once a year by unplugging the dryer, disconnecting the duct and vacuuming it, and check that the outside hood flaps move freely with no nests inside. Source: GE Appliances - Dryer - How to Clean Exhaust / Vent Duct
Brand guides: GE Dryer Not Heating: What to Check.
GE Dryer Repair Cost Ranges
A GE dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- How long the vent run is and where it exits the house
- Whether the dryer is gas or electric
Around Wanaque
Most dryer calls in Wanaque come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
New Jersey has no license specific to appliance repair; plumbing work is reserved to state-licensed master plumbers, and gas piping work on the customer side of the meter falls under HVACR contractor licensing, both overseen by boards in the Division of Consumer Affairs. Source: NJ Division of Consumer Affairs: State Board of Examiners of Master Plumbers rule notice
Under state law, working on gas piping on the load side of the meter requires a master HVACR contractor license or another state license whose scope includes gas piping. Source: NJ Division of Consumer Affairs: State Board of Examiners of Master Plumbers rule notice
Questions to Ask a Wanaque Technician
- Will you check the vent and lint path as part of the visit?
- Is your company licensed where my state requires it, and insured?
- What is the service call or diagnostic fee, and is it applied to the repair?
GE Dryer Repair FAQs: Wanaque, NJ
Which Wanaque technicians work on GE?
Should I repair or replace my GE dryer?
Why does my GE dryer show an error code?
More Laundry Repair in Wanaque, NJ
GE Dryer Repair Near Wanaque
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a GE repair.