If your GE dryer has stopped heating, stopped tumbling or started throwing an error code, the technician you call should know the model line. The Lemmon Valley list starts with companies that name GE, followed by other appliance repair companies that list dryer work.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by GE. If your dryer is still under manufacturer coverage, contact GE directly.
GE Dryer Repair Near Lemmon Valley
Within 30 miles of Lemmon Valley there are 23 appliance repair companies in our data. The rest are spread across Reno (15), Sparks (5), and Sun Valley (1). Distances run up to about 27 miles. The closest is All Star Dryer Vent, about 6.8 miles away. None of the companies within 30 miles mention GE by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. Rated companies nearby average 4.3 stars across 19 businesses.
Companies are shown by relevance and distance from Lemmon Valley. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Listing Saturday hours | 15 |
|---|---|
| List dryer or washer & dryer work | 7 |
| Distance to the three closest (mi) | 6.8, 6.9, 8.1 |
| Companies within 30 miles | 23 |
| With 4.5+ stars and at least 10 reviews | 11 |
| Mention GE | 0 |
First up for Lemmon Valley: Sears Appliance Repair (54.5 miles away, based in South Lake Tahoe, 4.5 stars from 60 reviews, lists Saturday hours); All Star Dryer Vent (6.8 miles away, based in Reno, 4.9 stars from 174 reviews, lists Saturday hours); Sears Appliance Repair (8.2 miles away, based in Reno, 4.5 stars from 110 reviews, lists Saturday hours); Mr. Appliance of Reno (12.3 miles away, based in Reno, 4.8 stars from 925 reviews, lists Saturday hours).
GE Dryer Lines and Features
What a GE Dryer Technician Deals With
GE allows only rigid or flexible metal vent duct and says plastic flexible duct is not acceptable because it collapses, cuts airflow and can collect water. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
What GE Says to Check First
- Dryer will not run or start. GE's first check is that the dryer plug is pushed fully into the wall outlet. Source: GE Appliances - Dryer - Will Not Run or Start
- Dryer takes too long to dry. GE points first to venting (metal duct, no kinks, clear wall cap) and a clean lint filter, then to load size, dryer level and washer spin speed. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
What GE Dryer Codes Mean
| Code | What it means |
|---|---|
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
GE Dryer Problems Worth a Service Call
- Dryer shuts off a few minutes into the cycle
- Drum will not turn even though you hear a hum
- Clothes still damp after a full cycle
Inside a Dryer Repair Visit
Owner Care for GE Dryers
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
Brand guides: GE Dryer Not Heating: What to Check.
Budgeting for a GE Dryer Repair
Price the repair before replacing a GE dryer. Published ranges for common jobs:
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- How long the vent run is and where it exits the house
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- The brand, model and serial number from the label inside the door or on the back panel
Dryer Notes for Lemmon Valley, NV
Most dryer calls in Lemmon Valley come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Nevada has no license class for appliance repair as such; contracting work on gas piping, gas vents and water heaters falls under the State Contractors Board's C-1 plumbing and heating subclassifications. Source: Nevada Administrative Code Chapter 624 (NAC 624.190)
In Nevada, you can check a license with the Nevada State Contractors Board License Search or report a problem to the Nevada Attorney General, Bureau of Consumer Protection.
Hiring a Dryer Repair Company in Lemmon Valley
- Will you check the vent and lint path as part of the visit?
- How often do you repair GE dryers, and do you carry common parts on the truck?
- If a part has to be ordered, how soon can you come back to finish?
GE Dryer Repair FAQs: Lemmon Valley, NV
Why do my clothes come out damp?
Why is my dryer running but not heating?
Do you work for GE?
More Laundry Repair in Lemmon Valley, NV
More GE Dryer Repair Pages Nearby
Before you call, find the model and serial number on your GE dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.