A Kenmore dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. Below are independent repair companies serving Lemmon Valley, with those that mention Kenmore first, then the nearest dryer repair companies.
Washer and Dryer Repair is independent and not affiliated with Kenmore. Listed companies are independent technicians who repair Kenmore dryers and other brands.
Kenmore appliances were sold through Sears for decades, so many owners look for Sears dryer repair. The companies here are independent technicians who work on Kenmore and Kenmore Elite dryers; they are not Sears.
Independent Kenmore Dryer Technicians, Lemmon Valley NV
We found 23 appliance repair companies within 30 miles of Lemmon Valley. The rest are spread across Reno (15), Sparks (5), and Sun Valley (1). No company within 30 miles of Lemmon Valley names Kenmore in its listing, so the list adds matches from farther out and the closest appliance repair companies. All Star Dryer Vent is the nearest, roughly 6.8 miles from Lemmon Valley. The 19 rated companies in range average 4.3 stars.
Companies are shown by relevance and distance from Lemmon Valley. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Show laundry appliance work | 7 |
|---|---|
| Appliance repair companies in range (30 mi) | 23 |
| Listing Saturday hours | 15 |
| Mention Kenmore | 0 |
| Three nearest companies, miles away | 6.8, 6.9, 8.1 |
| Rated 4.5 stars or higher (10+ reviews) | 11 |
The leading options for Lemmon Valley are Sears Appliance Repair (54.5 miles away, based in South Lake Tahoe, 4.5 stars from 60 reviews, lists Saturday hours); Mr. Appliance of Reno (12.3 miles away, based in Reno, 4.8 stars from 925 reviews, lists Saturday hours); All Star Dryer Vent (6.8 miles away, based in Reno, 4.9 stars from 174 reviews, lists Saturday hours); Sears (15.0 miles away, based in Reno, 4.6 stars from 89 reviews, lists Saturday hours).
Know Your Kenmore Dryer
How Kenmore Dryers Are Built
Accela Steam dryers connect directly to the household water supply, so the inlet hose and water pressure (20 to 120 psi) become part of a steam-dryer service check. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Kenmore's Check Vent sensor alerts the owner when the dryer is not moving enough air to the outside. Source: Kenmore - Laundry List: Kenmore Dryer Buying Guide
What Kenmore Says to Check First
- Dryer won't start. Kenmore says to confirm the cord is fully plugged into a grounded outlet and the breaker is intact, and to turn off Control Lock if buttons beep but nothing happens. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer not heating. Kenmore says to check for a tripped breaker or blown fuse and, on gas models, confirm the gas supply is on, noting an electric dryer can tumble without heat on a partial circuit. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Reading a Kenmore Dryer Error Code
| Code | What it means |
|---|---|
| HS (Elite steam dryers) | The humidity (moisture) sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| PS (Elite steam dryers) | The power cord on an electric model is wired incorrectly; check the neutral on the center terminal. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| PF / nP (Elite steam dryers) | A power supply or cord connection problem; check the cord at the terminal block and the house fuse or breaker. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore smart washers and dryers can check diagnostics through the Kenmore Smart app or Alexa and send app notices about blocked filters and other machine issues. Source: Kenmore - Kenmore Elite 81782 Smart 7.4 cu. ft. Electric Dryer with Accela Steam
Signs Your Kenmore Dryer Needs a Technician
- Cycles take two or three runs to finish
- Drum will not turn even though you hear a hum
- Clothes still damp after a full cycle
Inside a Dryer Repair Visit
Owner Care for Kenmore Dryers
- Use only 4-inch rigid or semi-rigid metal duct (no plastic or foil), check it for lint monthly and clean it at least yearly; one Elite steam model allows about 65 feet with no elbows and 28 feet with four 90-degree elbows using a 4-inch hood. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Kenmore Dryer Repair Cost Ranges
Most Kenmore dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- Any error code on the display
- Whether the dryer is gas or electric
- The brand, model and serial number from the label inside the door or on the back panel
Local Notes for Lemmon Valley
Most dryer calls in Lemmon Valley come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Nevada has no license class for appliance repair as such; contracting work on gas piping, gas vents and water heaters falls under the State Contractors Board's C-1 plumbing and heating subclassifications. Source: Nevada Administrative Code Chapter 624 (NAC 624.190)
Installing gas supply piping and vents requires a Nevada State Contractors Board license in the C-1 plumbing and heating classification (for example the C-1d plumbing or C-1g gas pipes and vents subclassifications), and water heater installation and repair falls under subclassification C-1h. Source: Nevada Administrative Code Chapter 624 (NAC 624.190)
Hiring a Dryer Repair Company in Lemmon Valley
- How often do you repair Kenmore dryers, and do you carry common parts on the truck?
- Can you look at the washer on the same visit if it is acting up too?
- Can you give a written estimate before ordering parts?
Kenmore Dryer Repair FAQs: Lemmon Valley, NV
What makes a dryer stop heating?
Why does my dryer take so long to dry?
What should I do about a Kenmore error code?
More Laundry Repair in Lemmon Valley, NV
Kenmore Dryer Repair Near Lemmon Valley
Write down any error code your Kenmore dryer shows and when it appears. It helps a Lemmon Valley technician bring the right parts.