Most Kenmore dryer repairs in Cold Springs involve the same few systems: heat, airflow, the drum drive and the controls. Below are independent repair companies serving Cold Springs, with those that mention Kenmore first, then the nearest dryer repair companies.
This is an independent directory. We are not affiliated with Kenmore, and the technicians listed are independent repair companies, not the manufacturer.
If you bought your Kenmore at Sears, you do not need to go back to Sears for a repair. Independent technicians near Cold Springs work on Kenmore dryers every week.
Independent Kenmore Dryer Technicians, Cold Springs NV
We found 23 appliance repair companies within 30 miles of Cold Springs. The rest are spread across Reno (15), Sparks (5), and Sun Valley (1). The farthest listed company is about 27 miles out. None of the companies within 30 miles mention Kenmore by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. Nearest on the list: All Star Dryer Vent, around 1.0 miles out. The 19 rated companies in range average 4.3 stars.
Companies are shown by relevance and distance from Cold Springs. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Show laundry appliance work | 7 |
|---|---|
| Three nearest companies, miles away | 1.0, 10.3, 11.0 |
| With 4.5+ stars and at least 10 reviews | 11 |
| Mention Kenmore | 0 |
| Appliance repair companies in range (30 mi) | 23 |
| Listing Saturday hours | 15 |
At the top of the Cold Springs list: Sears Appliance Repair (54.0 miles away, based in South Lake Tahoe, 4.5 stars from 60 reviews, lists Saturday hours); All Star Dryer Vent (1.0 miles away, based in Reno, 4.9 stars from 174 reviews, lists Saturday hours); Mr. Appliance of Reno (16.1 miles away, based in Reno, 4.8 stars from 925 reviews, lists Saturday hours); Sears (18.4 miles away, based in Reno, 4.6 stars from 89 reviews, lists Saturday hours).
Kenmore Dryer Features Technicians Work On
What a Kenmore Dryer Technician Deals With
Kenmore's Check Vent sensor alerts the owner when the dryer is not moving enough air to the outside. Source: Kenmore - Laundry List: Kenmore Dryer Buying Guide
What Kenmore Says to Check First
- Clothes wrinkled after drying. Kenmore says to remove clothes promptly, avoid overloading, and use Wrinkle Guard or a short touch-up cycle. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Check Vent light blinking. Kenmore says the exhaust is seriously restricted and the ducts should be cleaned and inspected before using the dryer again. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Kenmore Dryer Error Codes
| Code | What it means |
|---|---|
| tE1-tE7 (Elite steam dryers) | A temperature sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| HS (Elite steam dryers) | The humidity (moisture) sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| d80 / d90 / d95 (Elite steam dryers) | The exhaust ductwork is roughly 80, 90 or 95 percent blocked; stop using the dryer until the vent is cleaned or repaired. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore smart washers and dryers can check diagnostics through the Kenmore Smart app or Alexa and send app notices about blocked filters and other machine issues. Source: Kenmore - Kenmore Elite 81782 Smart 7.4 cu. ft. Electric Dryer with Accela Steam
Signs Your Kenmore Dryer Needs a Technician
- Clothes still damp after a full cycle
- Outside of the cabinet gets unusually hot
- Drum will not turn even though you hear a hum
Inside a Dryer Repair Visit
Owner Care for Kenmore Dryers
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
- Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
What Kenmore Dryer Repairs Cost
A Kenmore dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a Kenmore Dryer Call
- How long the vent run is and where it exits the house
- Any error code on the display
- The brand, model and serial number from the label inside the door or on the back panel
Dryer Notes for Cold Springs, NV
Most dryer calls in Cold Springs come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Nevada has no license class for appliance repair as such; contracting work on gas piping, gas vents and water heaters falls under the State Contractors Board's C-1 plumbing and heating subclassifications. Source: Nevada Administrative Code Chapter 624 (NAC 624.190)
In Nevada, you can check a license with the Nevada State Contractors Board License Search or report a problem to the Nevada Attorney General, Bureau of Consumer Protection.
Before You Book in Cold Springs
- Will you check the vent and lint path as part of the visit?
- Is your company licensed where my state requires it, and insured?
- If a part has to be ordered, how soon can you come back to finish?
Kenmore Dryer Repair FAQs: Cold Springs, NV
Why do my clothes come out damp?
Why is my dryer running but not heating?
Is this Kenmore customer service?
Which Cold Springs technicians work on Kenmore?
Related Repair Pages for Cold Springs
More Kenmore Dryer Repair Pages Nearby
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a Kenmore repair.