A GE dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. The Bexley list starts with companies that name GE, followed by other appliance repair companies that list dryer work.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by GE. If your dryer is still under manufacturer coverage, contact GE directly.
Independent GE Dryer Technicians, Bexley OH
Our data shows 40 appliance repair companies inside a 30-mile radius of Bexley. 1 of them are based in Bexley itself, and other nearby bases include Columbus (31), Reynoldsburg (2), and Upper Arlington (2). Distances run up to about 10 miles. The closest is Sullivan Appliance Repair Experts, about 0.6 miles away. No company within 30 miles of Bexley names GE in its listing, so the list adds matches from farther out and the closest appliance repair companies. The 34 rated companies in range average 4.6 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Open on Saturdays (per listing) | 43 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 20 |
| Mention GE | 0 |
| Repair companies inside 30 miles | 60 |
| Distance to the three closest (mi) | 0.6, 1.6, 2.1 |
| List dryer or washer & dryer work | 11 |
First up for Bexley: Sears Appliance Repair (59.9 miles away, based in Coshocton, 4.5 stars from 28 reviews, lists Saturday hours); Central Ohio Appliance Repair Inc. (9.8 miles away, based in Columbus, 4.5 stars from 963 reviews, lists Saturday hours); Appliance Fix Experts (4.3 miles away, based in Columbus, 4.7 stars from 54 reviews, lists Saturday hours); Sears Appliance Repair (9.1 miles away, based in Grove City, 4.5 stars from 181 reviews, lists Saturday hours).
GE Dryer Lines and Features
What Makes GE Dryer Repairs Different
GE allows only rigid or flexible metal vent duct and says plastic flexible duct is not acceptable because it collapses, cuts airflow and can collect water. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
An electric GE dryer receiving only partial (120V) power from its 240V circuit can tumble normally but produce no heat, and a dryer wired to a 120V circuit can take up to three times longer to dry. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat
What GE Says to Check First
- Gas dryer runs but does not heat. GE says to confirm a real drying cycle and temperature are selected, keep the front of the dryer unblocked, check the dedicated 120V outlet, and on new installs make sure the gas line is turned on. Source: GE Appliances - Gas Dryer - Runs But Does Not Heat
- Electric dryer runs but does not heat. GE says to confirm the dryer has a dedicated 240V supply, reset the breaker fully off and on, and then inspect the power cord and terminal block for burned or loose connections. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat
GE Dryer Error Codes
| Code | What it means |
|---|---|
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
GE Dryer Problems Worth a Service Call
- Burning or hot smell during a cycle
- Squealing, thumping or grinding while it runs
- Dryer shuts off a few minutes into the cycle
What Gets Fixed on a Bexley Dryer Call
Keeping a GE Dryer Running
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
Brand guides: GE Dryer Not Heating: What to Check.
GE Dryer Repair Cost Ranges
Price the repair before replacing a GE dryer. Published ranges for common jobs:
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair (most homeowners): $100–$430 Source: Angi - How Much Does Dryer Repair Cost?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a GE Dryer Call
- Any error code on the display
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- Whether the dryer is gas or electric
Dryer Notes for Bexley, OH
Most dryer calls in Bexley come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Ohio has no state license for appliance repair; the Ohio Construction Industry Licensing Board licenses commercial contractors in plumbing, hydronics, refrigeration, HVAC and electrical, and residential contractor work is generally overseen locally. Source: Ohio Department of Commerce: OCILB Contractor Complaint Form
At the state level, the Ohio Construction Industry Licensing Board licenses commercial plumbing, hydronics and HVAC contractors; for residential work the state board may lack authority, and local building departments handle code compliance and any local contractor licensing. Source: Ohio Department of Commerce: OCILB Contractor Complaint Form
How to Choose a Dryer Technician Near Bexley
- If a part has to be ordered, how soon can you come back to finish?
- Is your company licensed where my state requires it, and insured?
- Will you check the vent and lint path as part of the visit?
GE Dryer Repair FAQs: Bexley, OH
Do you work for GE?
Why does my GE dryer show an error code?
Why do my clothes come out damp?
More Laundry Repair in Bexley, OH
GE Dryer Repair in Nearby Cities
Write down any error code your GE dryer shows and when it appears. It helps a Bexley technician bring the right parts.