Most GE dryer repairs in Mentor-on-the-Lake involve the same few systems: heat, airflow, the drum drive and the controls. We flag companies whose listing or website mentions GE and fill in with nearby dryer repair companies so you always have options.
Washer and Dryer Repair is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dryers and other brands.
GE Dryer Repair Near Mentor-on-the-Lake
We found 40 appliance repair companies within 30 miles of Mentor-on-the-Lake. Other nearby bases include Cleveland (15), Mentor (3), and Eastlake (2). Distances run up to about 25 miles. The closest is G&L APPLIANCE REPAIR, about 2.9 miles away. No company within 90 miles of Mentor-on-the-Lake mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 4.5 stars across 35 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Three nearest companies, miles away | 2.9, 3.5, 4.1 |
|---|---|
| Repair companies inside 30 miles | 55 |
| Listing Saturday hours | 33 |
| Show laundry appliance work | 10 |
| Rated 4.5 stars or higher (10+ reviews) | 20 |
| Mention GE | 0 |
First up for Mentor-on-the-Lake: My Appliance Guy (6.8 miles away, based in Willowick, 4.9 stars from 340 reviews); Sears Appliance Repair (4.2 miles away, based in Mentor, 4.6 stars from 212 reviews, lists Saturday hours); G&L APPLIANCE REPAIR (2.9 miles away, based in Mentor, 5.0 stars from 97 reviews, lists Saturday hours); Mr. Appliance of Mentor (17.9 miles away, based in Madison, 4.7 stars from 591 reviews, lists Saturday hours).
Know Your GE Dryer
How GE Dryers Are Built
The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
GE Dryer Symptoms and First Checks
- Dryer takes too long to dry. GE points first to venting (metal duct, no kinks, clear wall cap) and a clean lint filter, then to load size, dryer level and washer spin speed. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
- Dryer will not run or start. GE's first check is that the dryer plug is pushed fully into the wall outlet. Source: GE Appliances - Dryer - Will Not Run or Start
What GE Dryer Codes Mean
| Code | What it means |
|---|---|
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
GE Dryer Problems Worth a Service Call
- Burning or hot smell during a cycle
- Outside of the cabinet gets unusually hot
- Cycles take two or three runs to finish
What a Dryer Repair Technician Checks
Care GE Recommends for Its Dryers
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
Brand guides: GE Dryer Not Heating: What to Check.
What GE Dryer Repairs Cost
Price the repair before replacing a GE dryer. Published ranges for common jobs:
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair: $100–$200 Source: Fixr - How much does it cost to repair a dryer?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- How long the vent run is and where it exits the house
- Whether the dryer is gas or electric
- The brand, model and serial number from the label inside the door or on the back panel
Dryer Notes for Mentor-on-the-Lake, OH
Most dryer calls in Mentor-on-the-Lake come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Ohio has no state license for appliance repair; the Ohio Construction Industry Licensing Board licenses commercial contractors in plumbing, hydronics, refrigeration, HVAC and electrical, and residential contractor work is generally overseen locally. Source: Ohio Department of Commerce: OCILB Contractor Complaint Form
At the state level, the Ohio Construction Industry Licensing Board licenses commercial plumbing, hydronics and HVAC contractors; for residential work the state board may lack authority, and local building departments handle code compliance and any local contractor licensing. Source: Ohio Department of Commerce: OCILB Contractor Complaint Form
Hiring a Dryer Repair Company in Mentor-on-the-Lake
- What guarantee do you give on parts and labor?
- Do you work on gas dryers, and who handles anything involving the gas line?
- What is the service call or diagnostic fee, and is it applied to the repair?
GE Dryer Repair FAQs: Mentor-on-the-Lake, OH
Why does my dryer take so long to dry?
What makes a dryer stop heating?
Why does my GE dryer show an error code?
Related Repair Pages for Mentor-on-the-Lake
GE Dryer Repair Near Mentor-on-the-Lake
Write down any error code your GE dryer shows and when it appears. It helps a Mentor-on-the-Lake technician bring the right parts.