GE owners in Old Forge usually want two things from a repair company: experience with the brand and quick access to parts. We flag companies whose listing or website mentions GE and fill in with nearby dryer repair companies so you always have options.
Washer and Dryer Repair is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dryers and other brands.
GE Dryer Repair Near Old Forge
Our data shows 29 appliance repair companies inside a 30-mile radius of Old Forge. Other nearby bases include Scranton (7), Pittston (3), and Kingston (2). The closest is Sears Appliance Repair, about 2.0 miles away. No company within 30 miles of Old Forge names GE in its listing, so the list adds matches from farther out and the closest appliance repair companies. Rated companies nearby average 4.2 stars across 29 businesses.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Rated 4.5 stars or higher (10+ reviews) | 15 |
|---|---|
| Mention GE | 0 |
| Companies within 30 miles | 29 |
| List dryer or washer & dryer work | 6 |
| Three nearest companies, miles away | 2.0, 2.9, 3.5 |
| Listing Saturday hours | 16 |
Closest matches for Old Forge: Sears Appliance Repair (59.6 miles away, based in Sayre, 4.2 stars from 53 reviews, lists Saturday hours); Sears Appliance Repair (11.1 miles away, based in Kingston, 4.7 stars from 164 reviews, lists Saturday hours); Sears Appliance Repair (8.4 miles away, based in Scranton, 4.8 stars from 177 reviews, lists Saturday hours); Sears Appliance Repair (2.0 miles away, based in Moosic, 4.7 stars from 74 reviews, lists Saturday hours).
GE Dryer Features Technicians Work On
What Makes GE Dryer Repairs Different
The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
What GE Says to Check First
- Dryer will not run or start. GE's first check is that the dryer plug is pushed fully into the wall outlet. Source: GE Appliances - Dryer - Will Not Run or Start
- Dryer hot to the touch or sweating. GE says this usually means heat and humidity cannot escape, so clean the exhaust duct, clear the wall cap and confirm the elbow count suits the vent length. Source: GE Appliances - Dryer - Hot to the Touch or Sweats
Reading a GE Dryer Error Code
| Code | What it means |
|---|---|
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
When to Call for GE Dryer Repair
- Squealing, thumping or grinding while it runs
- Outside of the cabinet gets unusually hot
- Burning or hot smell during a cycle
What Gets Fixed on a Old Forge Dryer Call
Owner Care for GE Dryers
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
Brand guides: GE Dryer Not Heating: What to Check.
GE Dryer Repair Cost Ranges
Price the repair before replacing a GE dryer. Published ranges for common jobs:
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a GE Dryer Call
- The brand, model and serial number from the label inside the door or on the back panel
- How long the vent run is and where it exits the house
- Whether the dryer is gas or electric
Around Old Forge
Most dryer calls in Old Forge come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Pennsylvania has no statewide license for appliance repair or for most construction trades; contractors doing home improvement work must register with the Attorney General, and some municipalities license trades such as plumbing. Source: Contractor Licensing (Pennsylvania Department of Labor & Industry)
There is no statewide plumbing or trade license in Pennsylvania, so any licensing for gas piping work is set by the municipality where the work happens (Philadelphia, for example, issues its own plumber licenses). Source: Contractor Licensing (Pennsylvania Department of Labor & Industry)
Questions to Ask a Old Forge Technician
- Can you look at the washer on the same visit if it is acting up too?
- Can you give a written estimate before ordering parts?
- What guarantee do you give on parts and labor?
GE Dryer Repair FAQs: Old Forge, PA
Is my GE dryer worth repairing?
Why do my clothes come out damp?
What makes a dryer stop heating?
Why does my GE dryer show an error code?
Other Dryer Repair in Old Forge
More GE Dryer Repair Pages Nearby
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a GE repair.