A GE dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. The Scranton list starts with companies that name GE, followed by other appliance repair companies that list dryer work.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by GE. If your dryer is still under manufacturer coverage, contact GE directly.
Who Works on GE Dryers Near Scranton
Our data shows 29 appliance repair companies inside a 30-mile radius of Scranton. 7 list an address in Scranton, and the rest are spread across Pittston (3), Eynon (2), and Wilkes-Barre Township (2). None of the companies within 30 miles mention GE by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. Nearest on the list: Tom's Appliance Repair, around 0.1 miles out. Across 29 rated companies, the average public rating is 4.2 stars.
Companies are shown by relevance and distance from Scranton. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Mention GE | 0 |
|---|---|
| Open on Saturdays (per listing) | 16 |
| Three nearest companies, miles away | 0.1, 1.5, 1.5 |
| Companies within 30 miles | 29 |
| With 4.5+ stars and at least 10 reviews | 15 |
| List dryer or washer & dryer work | 6 |
At the top of the Scranton list: Sears Appliance Repair (60.8 miles away, based in Sayre, 4.2 stars from 53 reviews, lists Saturday hours); Sears Appliance Repair (15.6 miles away, based in Kingston, 4.7 stars from 164 reviews, lists Saturday hours); Sears Appliance Repair (4.6 miles away, 4.8 stars from 177 reviews, lists Saturday hours); Sears Appliance Repair (2.8 miles away, based in Moosic, 4.7 stars from 74 reviews, lists Saturday hours).
GE Dryer Features Technicians Work On
How GE Dryers Are Built
Some GE dryers have an airflow sensor that shows a Check Vent alert when exhaust airflow drops, which usually means the vent is blocked. Source: GE Appliances - Dryer - Check Vent Sensor Alert
Common GE Dryer Problems
- Dryer hot to the touch or sweating. GE says this usually means heat and humidity cannot escape, so clean the exhaust duct, clear the wall cap and confirm the elbow count suits the vent length. Source: GE Appliances - Dryer - Hot to the Touch or Sweats
- Check Vent alert. GE says to unplug the dryer, disconnect and vacuum the duct, and make sure the outside hood damper moves freely. Source: GE Appliances - Dryer - Check Vent Sensor Alert
What GE Dryer Codes Mean
| Code | What it means |
|---|---|
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
When to Call for GE Dryer Repair
- Clothes still damp after a full cycle
- Outside of the cabinet gets unusually hot
- Dryer will not start when you press Start
How a Dryer Service Call Usually Goes in Scranton
Care GE Recommends for Its Dryers
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
- Inspect and clean the exhaust duct at least once a year by unplugging the dryer, disconnecting the duct and vacuuming it, and check that the outside hood flaps move freely with no nests inside. Source: GE Appliances - Dryer - How to Clean Exhaust / Vent Duct
Brand guides: GE Dryer Not Heating: What to Check.
Budgeting for a GE Dryer Repair
Most GE dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- The brand, model and serial number from the label inside the door or on the back panel
- Whether the dryer is gas or electric
- What happens when you press Start (no response, hum, runs with no heat, stops early)
Dryer Notes for Scranton, PA
Most dryer calls in Scranton come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Pennsylvania has no statewide license for appliance repair or for most construction trades; contractors doing home improvement work must register with the Attorney General, and some municipalities license trades such as plumbing. Source: Contractor Licensing (Pennsylvania Department of Labor & Industry)
There is no statewide plumbing or trade license in Pennsylvania, so any licensing for gas piping work is set by the municipality where the work happens (Philadelphia, for example, issues its own plumber licenses). Source: Contractor Licensing (Pennsylvania Department of Labor & Industry)
Questions to Ask a Scranton Technician
- Will you check the vent and lint path as part of the visit?
- Can you look at the washer on the same visit if it is acting up too?
- If a part has to be ordered, how soon can you come back to finish?
GE Dryer Repair FAQs: Scranton, PA
What makes a dryer stop heating?
Is this GE customer service?
Why do my clothes come out damp?
More Laundry Repair in Scranton, PA
More GE Dryer Repair Pages Nearby
Write down any error code your GE dryer shows and when it appears. It helps a Scranton technician bring the right parts.