GE owners in Garden City usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving Garden City, with those that mention GE first, then the nearest dryer repair companies.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by GE. If your dryer is still under manufacturer coverage, contact GE directly.
Independent GE Dryer Technicians, Garden City SC
33 repair companies serve Garden City from within 30 miles. The rest are spread across Myrtle Beach (17), North Myrtle Beach (5), and Conway (4). The farthest listed company is about 27 miles out. No company within 90 miles of Garden City mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Salty Air Appliance Repair is the nearest, roughly 0.5 miles from Garden City. Rated companies nearby average 4.5 stars across 31 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Rated 4.5 stars or higher (10+ reviews) | 17 |
|---|---|
| Listing Saturday hours | 18 |
| Mention GE | 0 |
| Repair companies inside 30 miles | 33 |
| Distance to the three closest (mi) | 0.5, 2.3, 2.3 |
| List dryer or washer & dryer work | 5 |
First up for Garden City: Sears Appliance Repair (9.1 miles away, based in Myrtle Beach, 4.4 stars from 838 reviews, lists Saturday hours); SC Appliance Repair (2.3 miles away, based in Myrtle Beach, 4.9 stars from 732 reviews, lists Saturday hours); Grand Strand Appliance Repair Service (6.2 miles away, based in Myrtle Beach, 4.9 stars from 194 reviews); Appliance Defiance (24.3 miles away, based in North Myrtle Beach, 4.9 stars from 143 reviews).
GE Dryer Lines and Features
What a GE Dryer Technician Deals With
GE allows only rigid or flexible metal vent duct and says plastic flexible duct is not acceptable because it collapses, cuts airflow and can collect water. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
Sensor dry models must sit level so tumbling clothes contact the moisture sensors; an unlevel dryer can end cycles with clothes still damp. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
What GE Says to Check First
- Gas dryer runs but does not heat. GE says to confirm a real drying cycle and temperature are selected, keep the front of the dryer unblocked, check the dedicated 120V outlet, and on new installs make sure the gas line is turned on. Source: GE Appliances - Gas Dryer - Runs But Does Not Heat
- Electric dryer runs but does not heat. GE says to confirm the dryer has a dedicated 240V supply, reset the breaker fully off and on, and then inspect the power cord and terminal block for burned or loose connections. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat
What GE Dryer Codes Mean
| Code | What it means |
|---|---|
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
When to Call for GE Dryer Repair
- Drum turns but the air stays cool
- Clothes still damp after a full cycle
- Dryer will not start when you press Start
What a Dryer Repair Technician Checks
Owner Care for GE Dryers
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
Brand guides: GE Dryer Not Heating: What to Check.
What GE Dryer Repairs Cost
Most GE dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- The brand, model and serial number from the label inside the door or on the back panel
- Any error code on the display
- What happens when you press Start (no response, hum, runs with no heat, stops early)
Dryer Notes for Garden City, SC
Most dryer calls in Garden City come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
South Carolina does not issue a license specific to appliance repair; mechanical work such as plumbing, heating, air conditioning and refrigeration is licensed by the Contractor's Licensing Board for commercial-scale jobs and by the Residential Builders Commission for residential HVAC and plumbing. Source: S.C. Code Title 40, Chapter 11 (Contractors), South Carolina Legislature
South Carolina has no standalone gas piping license; gas lines serving gas-fired equipment are installed under mechanical classifications such as Plumbing, Heating and Packaged Equipment issued through the Department of Labor, Licensing and Regulation. Source: S.C. Code Title 40, Chapter 11 (Contractors), South Carolina Legislature
Hiring a Dryer Repair Company in Garden City
- If a part has to be ordered, how soon can you come back to finish?
- What is the service call or diagnostic fee, and is it applied to the repair?
- What guarantee do you give on parts and labor?
GE Dryer Repair FAQs: Garden City, SC
Is my GE dryer worth repairing?
How do I find a technician who knows GE dryers?
Do you work for GE?
Related Repair Pages for Garden City
GE Dryer Repair in Nearby Cities
Before you call, find the model and serial number on your GE dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.