Most GE dryer repairs in Fabens involve the same few systems: heat, airflow, the drum drive and the controls. The Fabens list starts with companies that name GE, followed by other appliance repair companies that list dryer work.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by GE. If your dryer is still under manufacturer coverage, contact GE directly.
GE Dryer Repair Near Fabens
19 repair companies serve Fabens from within 30 miles. Other nearby bases include El Paso (17), Horizon City (1), and Socorro (1). Geko appliances repairs is the nearest, roughly 10.1 miles from Fabens. No company within 90 miles of Fabens mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 4.1 stars across 16 businesses.
Companies are shown by relevance and distance from Fabens. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Open on Saturdays (per listing) | 12 |
|---|---|
| Show laundry appliance work | 2 |
| Distance to the three closest (mi) | 10.1, 11.5, 18.1 |
| Appliance repair companies in range (30 mi) | 19 |
| Mention GE | 0 |
| Rated 4.5 stars or higher (10+ reviews) | 4 |
At the top of the Fabens list: AAA Affordable Appliance Repair (18.1 miles away, based in El Paso, 4.5 stars from 784 reviews, lists Saturday hours); Sears Appliance Repair (22.5 miles away, based in El Paso, 4.3 stars from 719 reviews, lists Saturday hours); Geko appliances repairs (10.1 miles away, based in Horizon City, 4.8 stars from 16 reviews, lists Saturday hours); Max Quality Appliance (11.5 miles away, based in Socorro, 4.7 stars from 131 reviews, lists Saturday hours).
Know Your GE Dryer
What a GE Dryer Technician Deals With
Sensor dry models must sit level so tumbling clothes contact the moisture sensors; an unlevel dryer can end cycles with clothes still damp. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
What GE Says to Check First
- Dryer takes too long to dry. GE points first to venting (metal duct, no kinks, clear wall cap) and a clean lint filter, then to load size, dryer level and washer spin speed. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
- Dryer hot to the touch or sweating. GE says this usually means heat and humidity cannot escape, so clean the exhaust duct, clear the wall cap and confirm the elbow count suits the vent length. Source: GE Appliances - Dryer - Hot to the Touch or Sweats
GE Dryer Error Codes
| Code | What it means |
|---|---|
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
Signs Your GE Dryer Needs a Technician
- Clothes still damp after a full cycle
- Dryer will not start when you press Start
- Dryer shuts off a few minutes into the cycle
What a Dryer Repair Technician Checks
Keeping a GE Dryer Running
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
Brand guides: GE Dryer Not Heating: What to Check.
Budgeting for a GE Dryer Repair
Most GE dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- Any error code on the display
- Whether the dryer is gas or electric
Around Fabens
Most dryer calls in Fabens come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, §1301.053 (Texas State Board of Plumbing Examiners)
Gas piping counts as plumbing in Texas and requires a plumbing license, with an exemption for LP gas installers who hold a separate state LP gas license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, §§1301.002, 1301.055 (Texas State Board of Plumbing Examiners)
Hiring a Dryer Repair Company in Fabens
- If a part has to be ordered, how soon can you come back to finish?
- Can you give a written estimate before ordering parts?
- How often do you repair GE dryers, and do you carry common parts on the truck?
GE Dryer Repair FAQs: Fabens, TX
What should I do about a GE error code?
Do you work for GE?
How do I find a technician who knows GE dryers?
Related Repair Pages for Fabens
More GE Dryer Repair Pages Nearby
Write down any error code your GE dryer shows and when it appears. It helps a Fabens technician bring the right parts.