Most GE dryer repairs in Hidalgo involve the same few systems: heat, airflow, the drum drive and the controls. The Hidalgo list starts with companies that name GE, followed by other appliance repair companies that list dryer work.
Washer and Dryer Repair is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dryers and other brands.
Who Works on GE Dryers Near Hidalgo
Within 30 miles of Hidalgo there are 40 appliance repair companies in our data. 1 of them are based in Hidalgo itself, and the rest are spread across McAllen (25), Mission (4), and Pharr (3). Nearest on the list: S & A Appliances, LLC, around 0.9 miles out. No company within 90 miles of Hidalgo mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Across 38 rated companies, the average public rating is 4.4 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention GE | 0 |
|---|---|
| Show laundry appliance work | 5 |
| Companies within 30 miles | 42 |
| Rated 4.5 stars or higher (10+ reviews) | 7 |
| Listing Saturday hours | 26 |
| Distance to the three closest (mi) | 0.9, 2.8, 4.2 |
The leading options for Hidalgo are Sears Appliance Repair (5.5 miles away, based in McAllen, 4.4 stars from 290 reviews, lists Saturday hours); Treviño Appliance - Sales, Service & Parts (7.6 miles away, based in Pharr, 4.7 stars from 232 reviews, lists Saturday hours); Sears Appliance Repair (16.3 miles away, based in Weslaco, 4.6 stars from 226 reviews, lists Saturday hours); Treviño Appliance - Sales, Service & Parts (14.4 miles away, based in Edinburg, 4.4 stars from 104 reviews, lists Saturday hours).
GE Dryer Lines and Features
How GE Dryers Are Built
The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
GE allows only rigid or flexible metal vent duct and says plastic flexible duct is not acceptable because it collapses, cuts airflow and can collect water. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
GE Dryer Symptoms and First Checks
- Check Vent alert. GE says to unplug the dryer, disconnect and vacuum the duct, and make sure the outside hood damper moves freely. Source: GE Appliances - Dryer - Check Vent Sensor Alert
- Dryer will not run or start. GE's first check is that the dryer plug is pushed fully into the wall outlet. Source: GE Appliances - Dryer - Will Not Run or Start
Reading a GE Dryer Error Code
| Code | What it means |
|---|---|
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
When to Call for GE Dryer Repair
- Clothes still damp after a full cycle
- Cycles take two or three runs to finish
- Drum turns but the air stays cool
What Gets Fixed on a Hidalgo Dryer Call
Keeping a GE Dryer Running
- Inspect and clean the exhaust duct at least once a year by unplugging the dryer, disconnecting the duct and vacuuming it, and check that the outside hood flaps move freely with no nests inside. Source: GE Appliances - Dryer - How to Clean Exhaust / Vent Duct
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
Brand guides: GE Dryer Not Heating: What to Check.
GE Dryer Repair Cost Ranges
A GE dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Typical dryer repair: $100–$200 Source: Fixr - How much does it cost to repair a dryer?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- How long the vent run is and where it exits the house
- Any error code on the display
- The brand, model and serial number from the label inside the door or on the back panel
Dryer Notes for Hidalgo, TX
Most dryer calls in Hidalgo come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, §1301.053 (Texas State Board of Plumbing Examiners)
Gas piping counts as plumbing in Texas and requires a plumbing license, with an exemption for LP gas installers who hold a separate state LP gas license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, §§1301.002, 1301.055 (Texas State Board of Plumbing Examiners)
Questions to Ask a Hidalgo Technician
- Can you look at the washer on the same visit if it is acting up too?
- Will you check the vent and lint path as part of the visit?
- What guarantee do you give on parts and labor?
GE Dryer Repair FAQs: Hidalgo, TX
What makes a dryer stop heating?
Why does my GE dryer show an error code?
Do you work for GE?
Why does my dryer take so long to dry?
Other Dryer Repair in Hidalgo
GE Dryer Repair in Nearby Cities
Write down any error code your GE dryer shows and when it appears. It helps a Hidalgo technician bring the right parts.