Most GE dryer repairs in Onalaska involve the same few systems: heat, airflow, the drum drive and the controls. Below are independent repair companies serving Onalaska, with those that mention GE first, then the nearest dryer repair companies.
Washer and Dryer Repair is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dryers and other brands.
Who Works on GE Dryers Near Onalaska
We found 40 appliance repair companies within 60 miles of Onalaska. Other nearby bases include Conroe (11), Spring (5), and Lufkin (4). Ace Repair Services is the nearest, roughly 12.4 miles from Onalaska. No company within 60 miles of Onalaska names GE in its listing, so the list adds matches from farther out and the closest appliance repair companies. The 36 rated companies in range average 4.6 stars. Onalaska is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Mention GE | 1 |
|---|---|
| Open on Saturdays (per listing) | 35 |
| Show laundry appliance work | 17 |
| Appliance repair companies in range (60 mi) | 60 |
| With 4.5+ stars and at least 10 reviews | 33 |
| Three nearest companies, miles away | 12.4, 12.9, 20.2 |
The leading options for Onalaska are Sears Appliance Repair (55.1 miles away, based in Liberty, 4.7 stars from 126 reviews, lists Saturday hours); Sears Appliance Repair (12.9 miles away, based in Livingston, 4.7 stars from 219 reviews, lists Saturday hours); UltraFix Appliance Repair (41.0 miles away, based in Conroe, 4.8 stars from 218 reviews, lists Saturday hours); Sears Appliance Repair (41.0 miles away, based in Conroe, 4.6 stars from 382 reviews, lists Saturday hours).
GE Dryer Lines and Features
What a GE Dryer Technician Deals With
The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
Common GE Dryer Problems
- Electric dryer runs but does not heat. GE says to confirm the dryer has a dedicated 240V supply, reset the breaker fully off and on, and then inspect the power cord and terminal block for burned or loose connections. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat
- Dryer takes too long to dry. GE points first to venting (metal duct, no kinks, clear wall cap) and a clean lint filter, then to load size, dryer level and washer spin speed. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
What GE Dryer Codes Mean
| Code | What it means |
|---|---|
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
When to Call for GE Dryer Repair
- Burning or hot smell during a cycle
- Cycles take two or three runs to finish
- Clothes still damp after a full cycle
What a Dryer Repair Technician Checks
Keeping a GE Dryer Running
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
Brand guides: GE Dryer Not Heating: What to Check.
Budgeting for a GE Dryer Repair
Price the repair before replacing a GE dryer. Published ranges for common jobs:
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair: $100–$200 Source: Fixr - How much does it cost to repair a dryer?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- Whether the dryer is gas or electric
- How long the vent run is and where it exits the house
Dryer Notes for Onalaska, TX
Most dryer calls in Onalaska come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, §1301.053 (Texas State Board of Plumbing Examiners)
Gas piping counts as plumbing in Texas and requires a plumbing license, with an exemption for LP gas installers who hold a separate state LP gas license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, §§1301.002, 1301.055 (Texas State Board of Plumbing Examiners)
Questions to Ask a Onalaska Technician
- Is your company licensed where my state requires it, and insured?
- Can you give a written estimate before ordering parts?
- Will you check the vent and lint path as part of the visit?
GE Dryer Repair FAQs: Onalaska, TX
Do you work for GE?
Why is my dryer running but not heating?
Which Onalaska technicians work on GE?
More Laundry Repair in Onalaska, TX
GE Dryer Repair Near Onalaska
Write down any error code your GE dryer shows and when it appears. It helps a Onalaska technician bring the right parts.