Most GE dryer repairs in Dranesville involve the same few systems: heat, airflow, the drum drive and the controls. The Dranesville list starts with companies that name GE, followed by other appliance repair companies that list dryer work.
Washer and Dryer Repair is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dryers and other brands.
Who Works on GE Dryers Near Dranesville
We found 40 appliance repair companies within 30 miles of Dranesville. Other nearby bases include Herndon (7), Ashburn (7), and Sterling (6). Sterling Appliance is the nearest, roughly 1.3 miles from Dranesville. None of the companies within 30 miles mention GE by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. The 39 rated companies in range average 4.8 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Distance to the three closest (mi) | 1.3, 2.0, 2.0 |
|---|---|
| List dryer or washer & dryer work | 11 |
| Companies within 30 miles | 60 |
| Rated 4.5 stars or higher (10+ reviews) | 23 |
| Mention GE | 0 |
| Listing Saturday hours | 55 |
Closest matches for Dranesville: District-Columbia Hotpoint Rpr (18.9 miles away, based in Washington, 5.0 stars from 4 reviews, lists Saturday hours); Herndon Appliance Repair (2.6 miles away, based in Herndon, 4.8 stars from 211 reviews, lists Saturday hours); Sterling Appliance (1.3 miles away, based in Sterling, 4.6 stars from 210 reviews, lists Saturday hours); Ashburn Appliance Repair (8.4 miles away, based in Ashburn, 4.7 stars from 171 reviews, lists Saturday hours).
GE Dryer Features Technicians Work On
What Makes GE Dryer Repairs Different
Some GE dryers have an airflow sensor that shows a Check Vent alert when exhaust airflow drops, which usually means the vent is blocked. Source: GE Appliances - Dryer - Check Vent Sensor Alert
GE allows only rigid or flexible metal vent duct and says plastic flexible duct is not acceptable because it collapses, cuts airflow and can collect water. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
Common GE Dryer Problems
- Check Vent alert. GE says to unplug the dryer, disconnect and vacuum the duct, and make sure the outside hood damper moves freely. Source: GE Appliances - Dryer - Check Vent Sensor Alert
- Dryer takes too long to dry. GE points first to venting (metal duct, no kinks, clear wall cap) and a clean lint filter, then to load size, dryer level and washer spin speed. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
GE Dryer Error Codes
| Code | What it means |
|---|---|
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
When to Call for GE Dryer Repair
- Dryer shuts off a few minutes into the cycle
- Drum turns but the air stays cool
- Dryer will not start when you press Start
How a Dryer Service Call Usually Goes in Dranesville
Keeping a GE Dryer Running
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
- Inspect and clean the exhaust duct at least once a year by unplugging the dryer, disconnecting the duct and vacuuming it, and check that the outside hood flaps move freely with no nests inside. Source: GE Appliances - Dryer - How to Clean Exhaust / Vent Duct
Brand guides: GE Dryer Not Heating: What to Check.
What GE Dryer Repairs Cost
Price the repair before replacing a GE dryer. Published ranges for common jobs:
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a GE Dryer Call
- Whether the dryer is gas or electric
- Any error code on the display
- How long the vent run is and where it exits the house
Dryer Notes for Dranesville, VA
Most dryer calls in Dranesville come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Virginia's Board for Contractors has no appliance repair license classification, but its gas fitting contracting specialty covers installing, repairing or removing gas piping and appliances attached to real property. Source: 18VAC50-22-30, Definitions of specialty services
The Board for Contractors licenses gas fitting contractors and individual gas fitter, natural gas fitter and liquefied petroleum gas fitter tradesmen. Source: 18VAC50-30-10, Definitions (Individual License and Certification Regulations)
Hiring a Dryer Repair Company in Dranesville
- If a part has to be ordered, how soon can you come back to finish?
- How often do you repair GE dryers, and do you carry common parts on the truck?
- Can you look at the washer on the same visit if it is acting up too?
GE Dryer Repair FAQs: Dranesville, VA
What makes a dryer stop heating?
Why does my GE dryer show an error code?
Why does my dryer take so long to dry?
More Laundry Repair in Dranesville, VA
More GE Dryer Repair Pages Nearby
Write down any error code your GE dryer shows and when it appears. It helps a Dranesville technician bring the right parts.