Most GE dryer repairs in Hartland involve the same few systems: heat, airflow, the drum drive and the controls. Below are independent repair companies serving Hartland, with those that mention GE first, then the nearest dryer repair companies.
Washer and Dryer Repair is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dryers and other brands.
Independent GE Dryer Technicians, Hartland WI
Within 30 miles of Hartland there are 40 appliance repair companies in our data. Other nearby bases include Milwaukee (8), Wauwatosa (5), and Brookfield (3). The farthest listed company is about 21 miles out. No company within 30 miles of Hartland names GE in its listing, so the list adds matches from farther out and the closest appliance repair companies. Nearest on the list: Lake Country Appliance Repair, around 3.4 miles out. The 36 rated companies in range average 3.9 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| List dryer or washer & dryer work | 14 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 12 |
| Three nearest companies, miles away | 3.4, 4.4, 6.4 |
| Appliance repair companies in range (30 mi) | 60 |
| Mention GE | 0 |
| Open on Saturdays (per listing) | 26 |
At the top of the Hartland list: Sears Appliance Repair (35.3 miles away, based in Beaver Dam, 4.5 stars from 86 reviews, lists Saturday hours); Mr. Appliance of Milwaukee (17.4 miles away, based in Muskego, 4.9 stars from 1,894 reviews); Lake Country Appliance Repair (3.4 miles away, based in Pewaukee, 4.6 stars from 155 reviews); Sears Appliance Repair (6.9 miles away, based in Oconomowoc, 4.1 stars from 59 reviews, lists Saturday hours).
Know Your GE Dryer
How GE Dryers Are Built
The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
GE Dryer Symptoms and First Checks
- Gas dryer runs but does not heat. GE says to confirm a real drying cycle and temperature are selected, keep the front of the dryer unblocked, check the dedicated 120V outlet, and on new installs make sure the gas line is turned on. Source: GE Appliances - Gas Dryer - Runs But Does Not Heat
- Electric dryer runs but does not heat. GE says to confirm the dryer has a dedicated 240V supply, reset the breaker fully off and on, and then inspect the power cord and terminal block for burned or loose connections. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat
Reading a GE Dryer Error Code
| Code | What it means |
|---|---|
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
GE Dryer Problems Worth a Service Call
- Squealing, thumping or grinding while it runs
- Clothes still damp after a full cycle
- Burning or hot smell during a cycle
Inside a Dryer Repair Visit
Care GE Recommends for Its Dryers
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
Brand guides: GE Dryer Not Heating: What to Check.
GE Dryer Repair Cost Ranges
Most GE dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- Any error code on the display
- How long the vent run is and where it exits the house
What Hartland Owners Should Know
Most dryer calls in Hartland come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Wisconsin has no separate appliance repair license; plumbing licensing covers appliances connected to water supply systems, including water heaters, but exempts minor repairs to appliances and repair or replacement of gas or electrical control valves and devices. Source: DSPS: Plumbing License Laws in Wisconsin
In Wisconsin, you can check a license with the Wisconsin DSPS LicensE credential lookup or report a problem to the Wisconsin Department of Agriculture, Trade and Consumer Protection (DATCP), Bureau of Consumer Protection.
Questions to Ask a Hartland Technician
- Will you check the vent and lint path as part of the visit?
- What is the service call or diagnostic fee, and is it applied to the repair?
- If a part has to be ordered, how soon can you come back to finish?
GE Dryer Repair FAQs: Hartland, WI
Why does my GE dryer show an error code?
Which Hartland technicians work on GE?
Why is my dryer running but not heating?
Related Repair Pages for Hartland
More GE Dryer Repair Pages Nearby
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a GE repair.