A GE dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. We flag companies whose listing or website mentions GE and fill in with nearby dryer repair companies so you always have options.
Washer and Dryer Repair is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dryers and other brands.
Who Works on GE Dryers Near Rib Mountain
We found 17 appliance repair companies within 60 miles of Rib Mountain. The rest are spread across Wausau (2), Stevens Point (2), and Wisconsin Rapids (2). Distances run up to about 53 miles. Nearest on the list: Seim Appliance Services., around 3.3 miles out. No company within 90 miles of Rib Mountain mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 4.3 stars across 17 businesses. Rib Mountain is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Three nearest companies, miles away | 3.3, 3.4, 6.5 |
|---|---|
| Show laundry appliance work | 7 |
| With 4.5+ stars and at least 10 reviews | 5 |
| Companies within 60 miles | 17 |
| Listing Saturday hours | 12 |
| Mention GE | 0 |
At the top of the Rib Mountain list: Sears Appliance Repair (27.1 miles away, based in Stevens Point, 4.4 stars from 99 reviews, lists Saturday hours); Sears Appliance Repair (30.8 miles away, based in Antigo, 4.9 stars from 7 reviews, lists Saturday hours); M&S Appliance Repair (39.2 miles away, based in Wisconsin Rapids, 4.6 stars from 60 reviews, lists Saturday hours); Aldridge Service Systems. (6.5 miles away, based in Kronenwetter, 4.0 stars from 4 reviews).
GE Dryer Lines and Features
What Makes GE Dryer Repairs Different
Sensor dry models must sit level so tumbling clothes contact the moisture sensors; an unlevel dryer can end cycles with clothes still damp. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
What GE Says to Check First
- Dryer will not run or start. GE's first check is that the dryer plug is pushed fully into the wall outlet. Source: GE Appliances - Dryer - Will Not Run or Start
- Dryer takes too long to dry. GE points first to venting (metal duct, no kinks, clear wall cap) and a clean lint filter, then to load size, dryer level and washer spin speed. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
GE Dryer Error Codes
| Code | What it means |
|---|---|
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
When to Call for GE Dryer Repair
- Outside of the cabinet gets unusually hot
- Squealing, thumping or grinding while it runs
- Drum will not turn even though you hear a hum
Inside a Dryer Repair Visit
Care GE Recommends for Its Dryers
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
Brand guides: GE Dryer Not Heating: What to Check.
GE Dryer Repair Cost Ranges
A GE dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- Any error code on the display
- Whether the dryer is gas or electric
Around Rib Mountain
Most dryer calls in Rib Mountain come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Wisconsin has no separate appliance repair license; plumbing licensing covers appliances connected to water supply systems, including water heaters, but exempts minor repairs to appliances and repair or replacement of gas or electrical control valves and devices. Source: DSPS: Plumbing License Laws in Wisconsin
In Wisconsin, you can check a license with the Wisconsin DSPS LicensE credential lookup or report a problem to the Wisconsin Department of Agriculture, Trade and Consumer Protection (DATCP), Bureau of Consumer Protection.
Hiring a Dryer Repair Company in Rib Mountain
- Will you check the vent and lint path as part of the visit?
- If a part has to be ordered, how soon can you come back to finish?
- What guarantee do you give on parts and labor?
GE Dryer Repair FAQs: Rib Mountain, WI
Why is my dryer running but not heating?
Do you work for GE?
What should I do about a GE error code?
Other Dryer Repair in Rib Mountain
More GE Dryer Repair Pages Nearby
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a GE repair.