If your GE dryer has stopped heating, stopped tumbling or started throwing an error code, the technician you call should know the model line. The Laramie list starts with companies that name GE, followed by other appliance repair companies that list dryer work.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by GE. If your dryer is still under manufacturer coverage, contact GE directly.
Who Works on GE Dryers Near Laramie
19 repair companies serve Laramie from within 60 miles. Other nearby bases include Fort Collins (10) and Cheyenne (9). The farthest listed company is about 60 miles out. No company within 90 miles of Laramie mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. A+ Charlie's Appliances is the nearest, roughly 42.9 miles from Laramie. Across 17 rated companies, the average public rating is 4.6 stars. Laramie is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Companies are shown by relevance and distance from Laramie. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Repair companies inside 60 miles | 19 |
|---|---|
| Listing Saturday hours | 11 |
| Mention GE | 0 |
| Rated 4.5 stars or higher (10+ reviews) | 5 |
| Show laundry appliance work | 3 |
| Distance to the three closest (mi) | 42.9, 43.0, 43.4 |
First up for Laramie: Romagnoli Appliance Repair (45.9 miles away, based in Cheyenne, 5.0 stars from 105 reviews); Elite Appliance Repair (47.4 miles away, based in Cheyenne, 4.9 stars from 54 reviews, lists Saturday hours); A+ Charlie's Appliances (42.9 miles away, based in Cheyenne, 3.3 stars from 79 reviews, lists Saturday hours); Swede's Appliance Service (45.1 miles away, based in Cheyenne, 5.0 stars from 230 reviews).
Know Your GE Dryer
What a GE Dryer Technician Deals With
The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
Sensor dry models must sit level so tumbling clothes contact the moisture sensors; an unlevel dryer can end cycles with clothes still damp. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
GE Dryer Symptoms and First Checks
- Electric dryer runs but does not heat. GE says to confirm the dryer has a dedicated 240V supply, reset the breaker fully off and on, and then inspect the power cord and terminal block for burned or loose connections. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat
- Gas dryer runs but does not heat. GE says to confirm a real drying cycle and temperature are selected, keep the front of the dryer unblocked, check the dedicated 120V outlet, and on new installs make sure the gas line is turned on. Source: GE Appliances - Gas Dryer - Runs But Does Not Heat
Reading a GE Dryer Error Code
| Code | What it means |
|---|---|
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
When to Call for GE Dryer Repair
- Clothes still damp after a full cycle
- Squealing, thumping or grinding while it runs
- Cycles take two or three runs to finish
What Gets Fixed on a Laramie Dryer Call
Keeping a GE Dryer Running
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
Brand guides: GE Dryer Not Heating: What to Check.
Budgeting for a GE Dryer Repair
Price the repair before replacing a GE dryer. Published ranges for common jobs:
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a GE Dryer Call
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- How long the vent run is and where it exits the house
- Any error code on the display
Local Notes for Laramie
Most dryer calls in Laramie come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
The Wyoming State Fire Marshal licenses electricians, electrical contractors and limited technicians (including an HVAC category), and its licensing page lists no appliance repair license. Source: Wyoming State Fire Marshal: Electrical Licensing
In Wyoming, you can check a license with the Wyoming State Fire Marshal Public Portal (electrical licensing) or report a problem to the Wyoming Attorney General, Consumer Protection and Antitrust Unit.
Questions to Ask a Laramie Technician
- If a part has to be ordered, how soon can you come back to finish?
- Is your company licensed where my state requires it, and insured?
- What is the service call or diagnostic fee, and is it applied to the repair?
GE Dryer Repair FAQs: Laramie, WY
What makes a dryer stop heating?
Why do my clothes come out damp?
Should I repair or replace my GE dryer?
Is this GE customer service?
Related Repair Pages for Laramie
More GE Dryer Repair Pages Nearby
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a GE repair.