Most Kenmore dryer repairs in Benton involve the same few systems: heat, airflow, the drum drive and the controls. The Benton list starts with companies that name Kenmore, followed by other appliance repair companies that list dryer work.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by Kenmore. If your dryer is still under manufacturer coverage, contact Kenmore directly.
Kenmore appliances were sold through Sears for decades, so many owners look for Sears dryer repair. The companies here are independent technicians who work on Kenmore and Kenmore Elite dryers; they are not Sears.
Who Works on Kenmore Dryers Near Benton
40 repair companies serve Benton from within 30 miles. 2 of them are based in Benton itself, and other nearby bases include Little Rock (22), North Little Rock (11), and Maumelle (3). The farthest listed company is about 24 miles out. Nearest on the list: Sears Appliance Repair, around 0.5 miles out. None of the companies within 30 miles mention Kenmore by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. Across 14 rated companies, the average public rating is 4.0 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Open on Saturdays (per listing) | 47 |
|---|---|
| Companies within 30 miles | 58 |
| Mention Kenmore | 0 |
| With 4.5+ stars and at least 10 reviews | 6 |
| List dryer or washer & dryer work | 8 |
| Distance to the three closest (mi) | 0.5, 0.9, 10.7 |
First up for Benton: Sears Appliance Repair (85.6 miles away, based in Hope, 4.7 stars from 51 reviews, lists Saturday hours); Sears Appliance Repair (0.5 miles away, 4.4 stars from 299 reviews, lists Saturday hours); A-Tech Appliance Service (20.4 miles away, based in Little Rock, 4.6 stars from 187 reviews); Sears Appliance Repair (16.7 miles away, based in Little Rock, 4.2 stars from 214 reviews, lists Saturday hours).
Know Your Kenmore Dryer
How Kenmore Dryers Are Built
On Kenmore Elite steam dryers, the display reports ductwork restriction in steps (d80, d90, d95) and a blinking CHECK VENT, which the guide says is an exhaust problem rather than a dryer failure. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
SmartDry Ultra dryers combine two moisture sensors with a temperature monitor and a dual heating element to fine-tune heat and cycle length. Source: Kenmore - 8.8 cu. ft. Electric Dryer w/ SmartDry Ultra Technology
Kenmore Dryer Symptoms and First Checks
- Dryer vibrating or noisy. Kenmore says to level the dryer on its four feet without extending them more than needed and keep at least an inch of clearance at the sides and back. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer won't start. Kenmore says to confirm the cord is fully plugged into a grounded outlet and the breaker is intact, and to turn off Control Lock if buttons beep but nothing happens. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Dryer Codes Mean
| Code | What it means |
|---|---|
| gAS (Elite steam dryers) | The gas supply is off on a gas model; open the house and dryer gas shutoffs. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| CHECK FILTER (Elite steam dryers) | A reminder to clean the lint filter before the load. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| CL (Elite steam dryers) | Control Lock is on. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
When to Call for Kenmore Dryer Repair
- Dryer will not start when you press Start
- Squealing, thumping or grinding while it runs
- Burning or hot smell during a cycle
What a Dryer Repair Technician Checks
Care Kenmore Recommends for Its Dryers
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
- If the lint screen looks clogged when held to the light, scrub it with hot soapy water and a stiff brush and let it dry fully before reinstalling. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
What Kenmore Dryer Repairs Cost
Most Kenmore dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a Kenmore Dryer Call
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- How long the vent run is and where it exits the house
- Whether the dryer is gas or electric
What Benton Owners Should Know
Most dryer calls in Benton come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Arkansas has no separate appliance repair license, and household appliances are listed as exempt equipment under the state HVACR licensing law, though exempt work must still meet HVACR rules and any local permit and inspection requirements. Source: Arkansas HVAC/R Statutes 2025, A.C.A. ยง 17-33-102 (Arkansas Department of Labor and Licensing)
Natural gas piping and equipment work is governed by the state plumbing and fuel gas codes, and gas fitters are licensed by the Arkansas Department of Health's Plumbing and Natural Gas program. Source: Plumbing & Natural Gas - Arkansas Department of Health
How to Choose a Dryer Technician Near Benton
- How often do you repair Kenmore dryers, and do you carry common parts on the truck?
- Is your company licensed where my state requires it, and insured?
- Do you work on gas dryers, and who handles anything involving the gas line?
Kenmore Dryer Repair FAQs: Benton, AR
How do I find a technician who knows Kenmore dryers?
What should I do about a Kenmore error code?
What makes a dryer stop heating?
Related Repair Pages for Benton
Kenmore Dryer Repair Near Benton
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a Kenmore repair.