Kenmore owners in Corning usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving Corning, with those that mention Kenmore first, then the nearest dryer repair companies.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by Kenmore. If your dryer is still under manufacturer coverage, contact Kenmore directly.
Kenmore appliances were sold through Sears for decades, so many owners look for Sears dryer repair. The companies here are independent technicians who work on Kenmore and Kenmore Elite dryers; they are not Sears.
Kenmore Dryer Repair Near Corning
18 repair companies serve Corning from within 60 miles. The rest are spread across Redding (5), Chico (4), and Red Bluff (3). None of the repair companies near Corning name Kenmore in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. Nearest on the list: Sears Appliance Repair, around 16.5 miles out. Across 16 rated companies, the average public rating is 4.1 stars. Because the nearest shops are farther out, ask each company whether Corning is inside its regular service area.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Rated 4.5 stars or higher (10+ reviews) | 5 |
|---|---|
| Appliance repair companies in range (60 mi) | 18 |
| Open on Saturdays (per listing) | 12 |
| Show laundry appliance work | 8 |
| Distance to the three closest (mi) | 16.5, 17.3, 20.3 |
| Mention Kenmore | 0 |
At the top of the Corning list: Northern Valley Appliance Services- Since 1957 (21.4 miles away, based in Chico, 4.6 stars from 34 reviews, lists Saturday hours); Sears Appliance Repair (16.5 miles away, based in Red Bluff, 4.5 stars from 35 reviews, lists Saturday hours); Sears Appliance Repair (24.4 miles away, based in Chico, 4.4 stars from 185 reviews, lists Saturday hours); A-1 Appliance (44.7 miles away, based in Oroville, 4.7 stars from 193 reviews, lists Saturday hours).
Kenmore Dryer Features Technicians Work On
How Kenmore Dryers Are Built
Accela Steam dryers connect directly to the household water supply, so the inlet hose and water pressure (20 to 120 psi) become part of a steam-dryer service check. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Common Kenmore Dryer Problems
- Dryer vibrating or noisy. Kenmore says to level the dryer on its four feet without extending them more than needed and keep at least an inch of clearance at the sides and back. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer not heating. Kenmore says to check for a tripped breaker or blown fuse and, on gas models, confirm the gas supply is on, noting an electric dryer can tumble without heat on a partial circuit. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Kenmore Dryer Error Codes
| Code | What it means |
|---|---|
| PS (Elite steam dryers) | The power cord on an electric model is wired incorrectly; check the neutral on the center terminal. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| gAS (Elite steam dryers) | The gas supply is off on a gas model; open the house and dryer gas shutoffs. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| d80 / d90 / d95 (Elite steam dryers) | The exhaust ductwork is roughly 80, 90 or 95 percent blocked; stop using the dryer until the vent is cleaned or repaired. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Signs Your Kenmore Dryer Needs a Technician
- Dryer shuts off a few minutes into the cycle
- Clothes still damp after a full cycle
- Dryer will not start when you press Start
How a Dryer Service Call Usually Goes in Corning
Owner Care for Kenmore Dryers
- Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
- If the lint screen looks clogged when held to the light, scrub it with hot soapy water and a stiff brush and let it dry fully before reinstalling. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Kenmore Dryer Repair Cost Ranges
Price the repair before replacing a Kenmore dryer. Published ranges for common jobs:
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- Whether the dryer is gas or electric
- The brand, model and serial number from the label inside the door or on the back panel
Around Corning
Most dryer calls in Corning come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
California requires businesses that repair major home appliances such as refrigerators, ranges, dishwashers, washers and dryers for pay to register with the Bureau of Household Goods and Services as Major Home Appliance Service Dealers, including out-of-state providers serving California customers. Source: Application for Registration (Electronic and Appliance Repair Dealers) - Bureau of Household Goods and Services
Gas piping, gas appliance connections and gas safety devices fall within the C-36 Plumbing Contractor classification licensed by the Contractors State License Board. Source: C-36 - Plumbing Contractor, Licensing Classifications Detail - CSLB
Questions to Ask a Corning Technician
- How often do you repair Kenmore dryers, and do you carry common parts on the truck?
- Will you check the vent and lint path as part of the visit?
- What is the service call or diagnostic fee, and is it applied to the repair?
Kenmore Dryer Repair FAQs: Corning, CA
Do you work for Kenmore?
Why does my dryer take so long to dry?
Is my Kenmore dryer worth repairing?
What makes a dryer stop heating?
Other Dryer Repair in Corning
More Kenmore Dryer Repair Pages Nearby
Write down any error code your Kenmore dryer shows and when it appears. It helps a Corning technician bring the right parts.