If your Kenmore dryer has stopped heating, stopped tumbling or started throwing an error code, the technician you call should know the model line. We flag companies whose listing or website mentions Kenmore and fill in with nearby dryer repair companies so you always have options.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by Kenmore. If your dryer is still under manufacturer coverage, contact Kenmore directly.
If you bought your Kenmore at Sears, you do not need to go back to Sears for a repair. Independent technicians near Milliken work on Kenmore dryers every week.
Independent Kenmore Dryer Technicians, Milliken CO
Within 30 miles of Milliken there are 40 appliance repair companies in our data. 1 list an address in Milliken, and the rest are spread across Fort Collins (15), Loveland (8), and Longmont (7). Distances run up to about 22 miles. Better Day Appliance Repair LLC is the nearest, roughly 0.5 miles from Milliken. No company within 90 miles of Milliken mentions Kenmore by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Across 37 rated companies, the average public rating is 4.6 stars.
Companies are shown by relevance and distance from Milliken. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Open on Saturdays (per listing) | 40 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 20 |
| Show laundry appliance work | 10 |
| Mention Kenmore | 0 |
| Distance to the three closest (mi) | 0.5, 2.6, 3.1 |
| Appliance repair companies in range (30 mi) | 60 |
At the top of the Milliken list: Mr. Appliance of Northern Colorado (11.8 miles away, based in Loveland, 4.8 stars from 1,832 reviews); Elevation Appliance and Fireplace (17.0 miles away, based in Frederick, 5.0 stars from 167 reviews); Manweiler Appliance (11.9 miles away, based in Windsor, 4.9 stars from 649 reviews, lists Saturday hours); NoCo Appliance (12.2 miles away, based in Loveland, 4.9 stars from 30 reviews).
Kenmore Dryer Lines and Features
What Makes Kenmore Dryer Repairs Different
Kenmore's compact condensing dryer needs no outside wall vent, runs on a 220V supply and offers manual-drain or direct-drain water removal. Source: Kenmore - 4.0 cu. ft. Front-Load Electric Condensing Dryer
SmartDry Ultra dryers combine two moisture sensors with a temperature monitor and a dual heating element to fine-tune heat and cycle length. Source: Kenmore - 8.8 cu. ft. Electric Dryer w/ SmartDry Ultra Technology
What Kenmore Says to Check First
- Dryer vibrating or noisy. Kenmore says to level the dryer on its four feet without extending them more than needed and keep at least an inch of clearance at the sides and back. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Clothes wrinkled after drying. Kenmore says to remove clothes promptly, avoid overloading, and use Wrinkle Guard or a short touch-up cycle. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Dryer Codes Mean
| Code | What it means |
|---|---|
| CHECK FILTER (Elite steam dryers) | A reminder to clean the lint filter before the load. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| d80 / d90 / d95 (Elite steam dryers) | The exhaust ductwork is roughly 80, 90 or 95 percent blocked; stop using the dryer until the vent is cleaned or repaired. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| tE1-tE7 (Elite steam dryers) | A temperature sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore smart washers and dryers can check diagnostics through the Kenmore Smart app or Alexa and send app notices about blocked filters and other machine issues. Source: Kenmore - Kenmore Elite 81782 Smart 7.4 cu. ft. Electric Dryer with Accela Steam
Signs Your Kenmore Dryer Needs a Technician
- Drum turns but the air stays cool
- Cycles take two or three runs to finish
- Dryer shuts off a few minutes into the cycle
What Gets Fixed on a Milliken Dryer Call
Keeping a Kenmore Dryer Running
- Use only 4-inch rigid or semi-rigid metal duct (no plastic or foil), check it for lint monthly and clean it at least yearly; one Elite steam model allows about 65 feet with no elbows and 28 feet with four 90-degree elbows using a 4-inch hood. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
What Kenmore Dryer Repairs Cost
Price the repair before replacing a Kenmore dryer. Published ranges for common jobs:
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a Kenmore Dryer Call
- Whether the dryer is gas or electric
- How long the vent run is and where it exits the house
- Any error code on the display
Local Notes for Milliken
Most dryer calls in Milliken come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Colorado's Division of Professions and Occupations has no appliance repair license; its trade licenses cover plumbing and electrical work. Source: Occupational Professions (Colorado DORA Division of Professions and Occupations)
In Colorado, you can check a license with the Colorado DORA License Lookup or report a problem to the Colorado Attorney General, Consumer Protection.
Hiring a Dryer Repair Company in Milliken
- How often do you repair Kenmore dryers, and do you carry common parts on the truck?
- If a part has to be ordered, how soon can you come back to finish?
- Do you work on gas dryers, and who handles anything involving the gas line?
Kenmore Dryer Repair FAQs: Milliken, CO
Why does my dryer take so long to dry?
Which Milliken technicians work on Kenmore?
What should I do about a Kenmore error code?
What makes a dryer stop heating?
Other Dryer Repair in Milliken
Kenmore Dryer Repair Near Milliken
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a Kenmore repair.