Kenmore owners in Branford Center usually want two things from a repair company: experience with the brand and quick access to parts. We flag companies whose listing or website mentions Kenmore and fill in with nearby dryer repair companies so you always have options.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by Kenmore. If your dryer is still under manufacturer coverage, contact Kenmore directly.
Kenmore dryers were made for Sears by several manufacturers over the years, so the model number matters more than the badge. Independent technicians can look up the parts from it.
Kenmore Dryer Repair Near Branford Center
Our data shows 40 appliance repair companies inside a 30-mile radius of Branford Center. Other nearby bases include New Haven (12), Milford (6), and Branford (4). The farthest listed company is about 16 miles out. The closest is Red Apple Appliance Repair, about 0.1 miles away. No company within 90 miles of Branford Center mentions Kenmore by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 19 rated companies in range average 4.7 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Companies within 30 miles | 60 |
|---|---|
| Mention Kenmore | 0 |
| Listing Saturday hours | 38 |
| Three nearest companies, miles away | 0.1, 0.9, 2.0 |
| Show laundry appliance work | 5 |
| With 4.5+ stars and at least 10 reviews | 13 |
Closest matches for Branford Center: Sears Appliance Repair (8.1 miles away, based in West Haven, 4.3 stars from 274 reviews, lists Saturday hours); Moe Appliances Repair LLC (13.3 miles away, based in Wallingford, 4.9 stars from 1,419 reviews); Sears Appliance Repair (11.7 miles away, based in Milford, 4.6 stars from 192 reviews, lists Saturday hours); Red Apple Appliance Repair (0.1 miles away, based in Branford, 4.7 stars from 48 reviews, lists Saturday hours).
Know Your Kenmore Dryer
How Kenmore Dryers Are Built
SmartDry Ultra dryers combine two moisture sensors with a temperature monitor and a dual heating element to fine-tune heat and cycle length. Source: Kenmore - 8.8 cu. ft. Electric Dryer w/ SmartDry Ultra Technology
Kenmore's compact condensing dryer needs no outside wall vent, runs on a 220V supply and offers manual-drain or direct-drain water removal. Source: Kenmore - 4.0 cu. ft. Front-Load Electric Condensing Dryer
What Kenmore Says to Check First
- Clothes wrinkled after drying. Kenmore says to remove clothes promptly, avoid overloading, and use Wrinkle Guard or a short touch-up cycle. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer takes too long to dry. Kenmore says to clean the lint filter of lint and softener residue and check the exhaust duct for buildup or excess length. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Kenmore Dryer Error Codes
| Code | What it means |
|---|---|
| PS (Elite steam dryers) | The power cord on an electric model is wired incorrectly; check the neutral on the center terminal. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| CL (Elite steam dryers) | Control Lock is on. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| d80 / d90 / d95 (Elite steam dryers) | The exhaust ductwork is roughly 80, 90 or 95 percent blocked; stop using the dryer until the vent is cleaned or repaired. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore smart washers and dryers can check diagnostics through the Kenmore Smart app or Alexa and send app notices about blocked filters and other machine issues. Source: Kenmore - Kenmore Elite 81782 Smart 7.4 cu. ft. Electric Dryer with Accela Steam
Signs Your Kenmore Dryer Needs a Technician
- Cycles take two or three runs to finish
- Dryer shuts off a few minutes into the cycle
- Drum turns but the air stays cool
What Gets Fixed on a Branford Center Dryer Call
Keeping a Kenmore Dryer Running
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
- Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Budgeting for a Kenmore Dryer Repair
Most Kenmore dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Typical dryer repair: $100–$200 Source: Fixr - How much does it cost to repair a dryer?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- Whether the dryer is gas or electric
- The brand, model and serial number from the label inside the door or on the back panel
Around Branford Center
Most dryer calls in Branford Center come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Connecticut's Department of Consumer Protection does not list a separate appliance repair license; work on gas piping, approved gas appliances and refrigeration systems falls under its heating, piping and cooling license categories. Source: Heating Piping and Cooling License Types and Scope of Work (CT Department of Consumer Protection)
In Connecticut, you can check a license with the CT Department of Consumer Protection: Verify a License or report a problem to the Connecticut Department of Consumer Protection.
Before You Book in Branford Center
- What guarantee do you give on parts and labor?
- Is your company licensed where my state requires it, and insured?
- Will you check the vent and lint path as part of the visit?
Kenmore Dryer Repair FAQs: Branford Center, CT
Why does my dryer take so long to dry?
What should I do about a Kenmore error code?
Which Branford Center technicians work on Kenmore?
Related Repair Pages for Branford Center
Kenmore Dryer Repair in Nearby Cities
Before you call, find the model and serial number on your Kenmore dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.