A Kenmore dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. The New London list starts with companies that name Kenmore, followed by other appliance repair companies that list dryer work.
Washer and Dryer Repair is independent and not affiliated with Kenmore. Listed companies are independent technicians who repair Kenmore dryers and other brands.
Kenmore dryers were made for Sears by several manufacturers over the years, so the model number matters more than the badge. Independent technicians can look up the parts from it.
Who Works on Kenmore Dryers Near New London
We found 20 appliance repair companies within 30 miles of New London. 2 of them are based in New London itself, and other nearby bases include Westerly (5), Groton (2), and Norwich (2). The farthest listed company is about 29 miles out. None of the repair companies near New London name Kenmore in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. The closest is BJ Appliance Service, about 0.5 miles away. The 18 rated companies in range average 4.7 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Listing Saturday hours | 11 |
|---|---|
| Show laundry appliance work | 5 |
| Three nearest companies, miles away | 0.5, 0.9, 2.5 |
| Mention Kenmore | 0 |
| With 4.5+ stars and at least 10 reviews | 8 |
| Appliance repair companies in range (30 mi) | 20 |
Closest matches for New London: Keith's Appliances (11.0 miles away, based in Norwich, 4.9 stars from 1,992 reviews, lists Saturday hours); Keith's Appliances (7.2 miles away, based in Mystic, 4.9 stars from 1,021 reviews, lists Saturday hours); Wickford Appliance Sales & Service (14.7 miles away, based in Westerly, 4.9 stars from 947 reviews, lists Saturday hours); Sears Appliance Repair (2.5 miles away, based in Waterford, 4.8 stars from 291 reviews, lists Saturday hours).
Kenmore Dryer Features Technicians Work On
How Kenmore Dryers Are Built
SmartDry Ultra dryers combine two moisture sensors with a temperature monitor and a dual heating element to fine-tune heat and cycle length. Source: Kenmore - 8.8 cu. ft. Electric Dryer w/ SmartDry Ultra Technology
Accela Steam dryers connect directly to the household water supply, so the inlet hose and water pressure (20 to 120 psi) become part of a steam-dryer service check. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Says to Check First
- Dryer takes too long to dry. Kenmore says to clean the lint filter of lint and softener residue and check the exhaust duct for buildup or excess length. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Clothes wrinkled after drying. Kenmore says to remove clothes promptly, avoid overloading, and use Wrinkle Guard or a short touch-up cycle. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Kenmore Dryer Error Codes
| Code | What it means |
|---|---|
| gAS (Elite steam dryers) | The gas supply is off on a gas model; open the house and dryer gas shutoffs. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| CL (Elite steam dryers) | Control Lock is on. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| HS (Elite steam dryers) | The humidity (moisture) sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Signs Your Kenmore Dryer Needs a Technician
- Clothes still damp after a full cycle
- Squealing, thumping or grinding while it runs
- Burning or hot smell during a cycle
Inside a Dryer Repair Visit
Care Kenmore Recommends for Its Dryers
- Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
- Use only 4-inch rigid or semi-rigid metal duct (no plastic or foil), check it for lint monthly and clean it at least yearly; one Elite steam model allows about 65 feet with no elbows and 28 feet with four 90-degree elbows using a 4-inch hood. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Kenmore Dryer Repair Cost Ranges
Most Kenmore dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- The brand, model and serial number from the label inside the door or on the back panel
- Whether the dryer is gas or electric
- What happens when you press Start (no response, hum, runs with no heat, stops early)
Around New London
Most dryer calls in New London come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Connecticut's Department of Consumer Protection does not list a separate appliance repair license; work on gas piping, approved gas appliances and refrigeration systems falls under its heating, piping and cooling license categories. Source: Heating Piping and Cooling License Types and Scope of Work (CT Department of Consumer Protection)
Installing, repairing and maintaining gas piping and approved gas appliances requires a state heating, piping and cooling license (such as the G-1/G-2 gas license or a broader B, D or S license) issued through the Department of Consumer Protection. Source: Heating Piping and Cooling License Types and Scope of Work (CT Department of Consumer Protection)
Before You Book in New London
- Will you check the vent and lint path as part of the visit?
- What is the service call or diagnostic fee, and is it applied to the repair?
- If a part has to be ordered, how soon can you come back to finish?
Kenmore Dryer Repair FAQs: New London, CT
Why is my dryer running but not heating?
Why does my dryer take so long to dry?
Is my Kenmore dryer worth repairing?
What should I do about a Kenmore error code?
Other Dryer Repair in New London
More Kenmore Dryer Repair Pages Nearby
Before you call, find the model and serial number on your Kenmore dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.