Most Kenmore dryer repairs in Ammon involve the same few systems: heat, airflow, the drum drive and the controls. Below are independent repair companies serving Ammon, with those that mention Kenmore first, then the nearest dryer repair companies.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by Kenmore. If your dryer is still under manufacturer coverage, contact Kenmore directly.
If you bought your Kenmore at Sears, you do not need to go back to Sears for a repair. Independent technicians near Ammon work on Kenmore dryers every week.
Independent Kenmore Dryer Technicians, Ammon ID
16 repair companies serve Ammon from within 60 miles. Other nearby bases include Idaho Falls (4), Rexburg (3), and Blackfoot (3). The farthest listed company is about 52 miles out. Sears Appliance Repair is the nearest, roughly 1.6 miles from Ammon. None of the repair companies near Ammon name Kenmore in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. Rated companies nearby average 4.5 stars across 16 businesses. Ammon is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Companies are shown by relevance and distance from Ammon. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Distance to the three closest (mi) | 1.6, 1.8, 1.9 |
|---|---|
| Appliance repair companies in range (60 mi) | 16 |
| List dryer or washer & dryer work | 4 |
| With 4.5+ stars and at least 10 reviews | 10 |
| Listing Saturday hours | 8 |
| Mention Kenmore | 0 |
First up for Ammon: Sears Appliance Repair (1.6 miles away, based in Idaho Falls, 4.7 stars from 209 reviews, lists Saturday hours); Sarah's Appliance Repair LLC (1.9 miles away, based in Idaho Falls, 4.8 stars from 106 reviews, lists Saturday hours); Batteries Plus Phone Repair (1.8 miles away, based in Idaho Falls, 4.6 stars from 98 reviews, lists Saturday hours); Making Mends Appliance Repair & Rentals (27.7 miles away, based in Rexburg, 4.9 stars from 59 reviews).
Know Your Kenmore Dryer
What a Kenmore Dryer Technician Deals With
On Kenmore Elite steam dryers, the display reports ductwork restriction in steps (d80, d90, d95) and a blinking CHECK VENT, which the guide says is an exhaust problem rather than a dryer failure. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Says to Check First
- Dryer takes too long to dry. Kenmore says to clean the lint filter of lint and softener residue and check the exhaust duct for buildup or excess length. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer not heating. Kenmore says to check for a tripped breaker or blown fuse and, on gas models, confirm the gas supply is on, noting an electric dryer can tumble without heat on a partial circuit. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Reading a Kenmore Dryer Error Code
| Code | What it means |
|---|---|
| d80 / d90 / d95 (Elite steam dryers) | The exhaust ductwork is roughly 80, 90 or 95 percent blocked; stop using the dryer until the vent is cleaned or repaired. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| CL (Elite steam dryers) | Control Lock is on. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| PF / nP (Elite steam dryers) | A power supply or cord connection problem; check the cord at the terminal block and the house fuse or breaker. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore smart washers and dryers can check diagnostics through the Kenmore Smart app or Alexa and send app notices about blocked filters and other machine issues. Source: Kenmore - Kenmore Elite 81782 Smart 7.4 cu. ft. Electric Dryer with Accela Steam
Kenmore Dryer Problems Worth a Service Call
- Drum will not turn even though you hear a hum
- Burning or hot smell during a cycle
- Outside of the cabinet gets unusually hot
Inside a Dryer Repair Visit
Keeping a Kenmore Dryer Running
- Use only 4-inch rigid or semi-rigid metal duct (no plastic or foil), check it for lint monthly and clean it at least yearly; one Elite steam model allows about 65 feet with no elbows and 28 feet with four 90-degree elbows using a 4-inch hood. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Kenmore Dryer Repair Cost Ranges
A Kenmore dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Typical dryer repair: $100–$200 Source: Fixr - How much does it cost to repair a dryer?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- Whether the dryer is gas or electric
- Any error code on the display
- What happens when you press Start (no response, hum, runs with no heat, stops early)
Local Notes for Ammon
Most dryer calls in Ammon come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Idaho's Division of Occupational and Professional Licenses does not list appliance repair as a licensed profession; gas piping and gas appliance work falls under the state's HVAC licensing, which includes specialty licenses for those trades. Source: Is My Profession Licensed? - Idaho DOPL
Idaho treats gas piping, gas appliances and their venting as HVAC work licensed by the state through DOPL, with specialty HVAC licenses available for gas piping or gas appliances alone and a limited heating specialty for propane-fired appliances. Source: Idaho Code Section 54-5003, Definitions (HVAC)
Hiring a Dryer Repair Company in Ammon
- If a part has to be ordered, how soon can you come back to finish?
- What guarantee do you give on parts and labor?
- Will you check the vent and lint path as part of the visit?
Kenmore Dryer Repair FAQs: Ammon, ID
Why does my dryer take so long to dry?
Why is my dryer running but not heating?
What should I do about a Kenmore error code?
Which Ammon technicians work on Kenmore?
More Laundry Repair in Ammon, ID
Kenmore Dryer Repair in Nearby Cities
Write down any error code your Kenmore dryer shows and when it appears. It helps a Ammon technician bring the right parts.