Serving Ammon, Idaho and nearby areas Helpline · (888) 772-9805
☎(888) 772-9805Call

Dryer Repair in Ammon, ID

Gas and electric dryer repair from independent technicians serving Ammon, with ratings, distances and what to check before you call.

Clothes still wet in Ammon?
One call connects you with a local technician who repairs gas and electric dryers.
☎(888) 772-9805
✓12 companies listed for Ammon✓Independent, not a manufacturer✓Public ratings & distances

A dryer that stops heating or takes three cycles to finish a load turns laundry into a daily problem. Below are the companies within reach of Ammon, sorted by how closely they match dryer work, then by distance and public ratings.

Dryer Repair Companies Near Ammon

Within 60 miles of Ammon there are 16 appliance repair companies in our data. Other nearby bases include Idaho Falls (4), Rexburg (3), and Blackfoot (3). The farthest listed company is about 52 miles out. 4 of them mention dryer or washer-and-dryer work in their listing or website. Nearest on the list: Sears Appliance Repair, around 1.6 miles out. Across 16 rated companies, the average public rating is 4.5 stars. Ammon is a smaller market, so expect a longer drive and ask whether a trip charge applies.

Washer & Dryer Repair
Sears Appliance Repair
2300 E 17th St, Idaho Falls, ID 83404
1.6 mi from Ammon
★★★★½ 4.7 (209 reviews)
DryersWashersSaturday hours
Washer & Dryer Repair
Sarah's Appliance Repair LLC
3470 Washington Pkwy Ste 2, Idaho Falls, ID 83404
1.9 mi from Ammon
★★★★★ 4.8 (106 reviews)
DryersWashersSaturday hours
Washer & Dryer Repair
Making Mends Appliance Repair & Rentals
1272 N Yellowstone Hwy Suite 3, Rexburg, ID 83440
27.7 mi from Ammon
★★★★★ 4.9 (59 reviews)
DryersWashers
Washer & Dryer Repair
Sears Appliance Repair
2215 Garrett Way, Pocatello, ID 83201
48.3 mi from Ammon
★★★★½ 4.7 (38 reviews)
DryersWashersSaturday hours
Appliance Repair
A-Tech Appliance Repair.
3817 E 12 N, Rigby, ID 83442
10.6 mi from Ammon
★★★★★ 5.0 (4 reviews)
Saturday hours
Appliance Repair
Batteries Plus Phone Repair
2182 Channing Way, Idaho Falls, ID 83404
1.8 mi from Ammon
★★★★½ 4.6 (98 reviews)
Saturday hours
Appliance Repair
Servco Appliance Services
129 W Main St, Rigby, ID 83442
13.8 mi from Ammon
★★★★ 4.2 (32 reviews)
Appliance Repair
Steven's Appliance Services
747 W 160 N, Blackfoot, ID 83221
30.1 mi from Ammon
★★★★★ 5.0 (292 reviews)
Appliance Repair
A-Z Appliance Repair, LLC
365 Ronglyn Ave, Idaho Falls, ID 83401
3.4 mi from Ammon
★★★★½ 4.7 (41 reviews)
Appliance Repair
Walker Appliance & Refrigeration
703 E 7th N, Rexburg, ID 83440
27.1 mi from Ammon
★★★★½ 4.4 (47 reviews)
Appliance Repair
Kevin's Appliance Repair Service
5965 Eden St, Pocatello, ID 83202
44.9 mi from Ammon
★★★★★ 4.8 (106 reviews)
Saturday hours
Appliance Repair
BJ's Appliance Repair
1517 On Os, Blackfoot, ID 83221
37.5 mi from Ammon
★★★★★ 5.0 (15 reviews)

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

Repair market snapshot: Ammon, ID
Companies within 60 miles16
List dryer or washer & dryer work4
Open on Saturdays (per listing)8
Distance to the three closest (mi)1.6, 1.8, 1.9
Rated 4.5 stars or higher (10+ reviews)10
Mention a major dryer brand0

The leading options for Ammon are Sears Appliance Repair (1.6 miles away, based in Idaho Falls, 4.7 stars from 209 reviews, lists Saturday hours); Sarah's Appliance Repair LLC (1.9 miles away, based in Idaho Falls, 4.8 stars from 106 reviews, lists Saturday hours); Making Mends Appliance Repair & Rentals (27.7 miles away, based in Rexburg, 4.9 stars from 59 reviews); Sears Appliance Repair (48.3 miles away, based in Pocatello, 4.7 stars from 38 reviews, lists Saturday hours).

⚡ Get connected with a dryer technician near Ammon
☎(888) 772-9805

When to Call for Dryer Repair

  • Burning or hot smell during a cycle
  • Cycles take two or three runs to finish
  • Dryer shuts off a few minutes into the cycle
  • Outside of the cabinet gets unusually hot

Why Dryers Break Down

Heat-source failuresElectric elements burn out and gas igniters and valve coils weaken with age. Either one leaves the drum turning with no heat.
Power and gas supplyA half-tripped breaker on a 240-volt circuit or a closed gas shutoff can look exactly like a broken dryer.
Blocked or crushed ventsA dryer can only dry as fast as it can push moist air outside. Lint buildup, a crushed foil duct behind the machine or a stuck exhaust hood flap slow everything down.

Inside a Dryer Repair Visit

Airflow and the ventA long dry time is most often an airflow problem. A technician checks the lint screen housing, the duct behind the dryer and the exhaust hood outside before replacing any heating parts, because a restricted vent can make a healthy dryer look broken.
Moisture sensor and controlsSensor-dry cycles stop when two metal strips inside the drum read dry clothes. Fabric-softener film on those strips can end cycles early or let them run long, and a technician checks them before blaming the control board.
Heating elementElectric dryers heat with a coiled element. If the drum turns but the air stays cool, the element is checked for continuity along with the thermostats and fuses that feed it.

Why the Vent Matters

Clean the vent pipe roughly once a year, or sooner if loads start taking longer to dry; a lint removal service can do this. Source: NFPA (via U.S. Department of Energy) - Clothes Dryer & Washing Machine Safety

The outside termination should have a backdraft damper and no screen (screens trap lint), and the flap must open when the dryer runs and be kept clear of snow. Source: U.S. DOE Building America Solution Center (PNNL) - Proper Clothes Dryer Venting

Under the model residential code approach, a 4-inch dryer exhaust duct is limited to 35 feet of equivalent length, minus 2.5 feet for each 45-degree bend and 5 feet for each 90-degree bend, unless the dryer manufacturer's installation instructions set a different maximum. Source: U.S. DOE Building America Solution Center (PNNL) - Proper Clothes Dryer Venting

More: clogged dryer vent warning signs.

Dryer Repair Cost Ranges

Most dryer repairs involve a modest part and an hour or so of labor. Reference ranges from published cost guides:

If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?

Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.

Around Ammon

Most dryer calls in Ammon come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.

Idaho's Division of Occupational and Professional Licenses does not list appliance repair as a licensed profession; gas piping and gas appliance work falls under the state's HVAC licensing, which includes specialty licenses for those trades. Source: Is My Profession Licensed? - Idaho DOPL

Idaho treats gas piping, gas appliances and their venting as HVAC work licensed by the state through DOPL, with specialty HVAC licenses available for gas piping or gas appliances alone and a limited heating specialty for propane-fired appliances. Source: Idaho Code Section 54-5003, Definitions (HVAC)

Hiring a Dryer Repair Company in Ammon

  • If a part has to be ordered, how soon can you come back to finish?
  • What guarantee do you give on parts and labor?
  • Is your company licensed where my state requires it, and insured?

Dryer Repair FAQs: Ammon, ID

Why is my dryer squealing?
Squeaks and squeals usually come from worn drum rollers, the idler pulley or the drum glides. They are not dangerous right away, but worn parts can damage the belt or drum if they are left too long.
How much does dryer repair cost in Ammon?
Most companies charge a service call or diagnostic fee that is often applied to the repair, and common jobs such as belts, rollers, fuses and heating elements are among the least expensive appliance repairs. Our dryer repair cost guide lists published ranges.
What makes a dryer stop heating?
On an electric dryer the usual suspects are the heating element, a blown thermal fuse, a failed thermostat or a tripped breaker on one leg of the circuit. On a gas dryer, check that the gas is on, then the igniter and valve coils. A blocked vent can trip the safety fuse on both types, so it should be cleared first.
What should I check before calling?
Confirm the breaker or gas is on, clean the lint screen, and make sure the vent hood outside opens when the dryer runs. If the vent is blocked or crushed, clear it before running the dryer again.

Dryer Repair by Brand in Ammon

More Dryer Repair Pages Nearby

A clear vent, a clean lint screen and the model number in hand make any dryer repair in Ammon faster and cheaper.

One call to reach a local dryer repair company
☎(888) 772-9805
☎ Call (888) 772-9805 Talk to a tech