If your Kenmore dryer has stopped heating, stopped tumbling or started throwing an error code, the technician you call should know the model line. Below are independent repair companies serving Great Bend, with those that mention Kenmore first, then the nearest dryer repair companies.
This is an independent directory. We are not affiliated with Kenmore, and the technicians listed are independent repair companies, not the manufacturer.
If you bought your Kenmore at Sears, you do not need to go back to Sears for a repair. Independent technicians near Great Bend work on Kenmore dryers every week.
Who Works on Kenmore Dryers Near Great Bend
Within 60 miles of Great Bend there are 10 appliance repair companies in our data. 3 of them are based in Great Bend itself, and the rest are spread across Hays (5), Russell (1), and Pratt (1). Of those, 1 mentions Kenmore by name. Nearest on the list: Boone's Maytag Home Appliance, around 1.1 miles out. The 10 rated companies in range average 4.6 stars. Great Bend is a smaller market, so expect a longer drive and ask whether a trip charge applies.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Open on Saturdays (per listing) | 5 |
|---|---|
| Three nearest companies, miles away | 1.1, 1.8, 9.4 |
| With 4.5+ stars and at least 10 reviews | 4 |
| List dryer or washer & dryer work | 2 |
| Companies within 60 miles | 10 |
| Mention Kenmore | 1 |
The leading options for Great Bend are Sears Appliance Repair (49.6 miles away, based in Pratt, 4.8 stars from 23 reviews, lists Saturday hours); Boone's Maytag Home Appliance (1.1 miles away, 3.3 stars from 14 reviews, lists Saturday hours); Great Bend Appliance Center (1.8 miles away, 4.5 stars from 92 reviews, lists Saturday hours); Mickey's Appliance Repair (9.4 miles away, 4.6 stars from 36 reviews).
Kenmore Dryer Lines and Features
How Kenmore Dryers Are Built
Accela Steam dryers connect directly to the household water supply, so the inlet hose and water pressure (20 to 120 psi) become part of a steam-dryer service check. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Says to Check First
- Dryer vibrating or noisy. Kenmore says to level the dryer on its four feet without extending them more than needed and keep at least an inch of clearance at the sides and back. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Clothes wrinkled after drying. Kenmore says to remove clothes promptly, avoid overloading, and use Wrinkle Guard or a short touch-up cycle. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Reading a Kenmore Dryer Error Code
| Code | What it means |
|---|---|
| CL (Elite steam dryers) | Control Lock is on. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| tE1-tE7 (Elite steam dryers) | A temperature sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| d80 / d90 / d95 (Elite steam dryers) | The exhaust ductwork is roughly 80, 90 or 95 percent blocked; stop using the dryer until the vent is cleaned or repaired. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore smart washers and dryers can check diagnostics through the Kenmore Smart app or Alexa and send app notices about blocked filters and other machine issues. Source: Kenmore - Kenmore Elite 81782 Smart 7.4 cu. ft. Electric Dryer with Accela Steam
Kenmore Dryer Problems Worth a Service Call
- Dryer will not start when you press Start
- Squealing, thumping or grinding while it runs
- Outside of the cabinet gets unusually hot
What Gets Fixed on a Great Bend Dryer Call
Care Kenmore Recommends for Its Dryers
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
- Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Kenmore Dryer Repair Cost Ranges
Most Kenmore dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- Whether the dryer is gas or electric
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- How long the vent run is and where it exits the house
Local Notes for Great Bend
Most dryer calls in Great Bend come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Kansas leaves contractor and trade licensing, including plumbing and HVAC, to cities and counties, so who may do gas piping and gas appliance connections depends on the local jurisdiction. Source: Kansas Business Center: Business Starter Kit, Construction
In Kansas, you can report a problem to the Kansas Attorney General Public Protection Division (Consumer Protection).
Before You Book in Great Bend
- Do you work on gas dryers, and who handles anything involving the gas line?
- If a part has to be ordered, how soon can you come back to finish?
- Can you look at the washer on the same visit if it is acting up too?
Kenmore Dryer Repair FAQs: Great Bend, KS
How do I find a technician who knows Kenmore dryers?
Should I repair or replace my Kenmore dryer?
Do you work for Kenmore?
Other Dryer Repair in Great Bend
More Kenmore Dryer Repair Pages Nearby
Before you call, find the model and serial number on your Kenmore dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.