Kenmore Dryer Repair in Glenarden, MD

Most Kenmore dryer repairs in Glenarden involve the same few systems: heat, airflow, the drum drive and the controls. The Glenarden list starts with companies that name Kenmore, followed by other appliance repair companies that list dryer work.

Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by Kenmore. If your dryer is still under manufacturer coverage, contact Kenmore directly.

If you bought your Kenmore at Sears, you do not need to go back to Sears for a repair. Independent technicians near Glenarden work on Kenmore dryers every week.

Kenmore Dryer Repair Near Glenarden

40 repair companies serve Glenarden from within 30 miles. Other nearby bases include Washington (8), Hyattsville (4), and Bowie (3). Distances run up to about 9 miles. No company within 90 miles of Glenarden mentions Kenmore by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is Miracle Appliance Repair, about 1.2 miles away. The 36 rated companies in range average 4.1 stars.

Companies are shown by relevance and distance from Glenarden. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.

First up for Glenarden: Mr. Appliance of Central Maryland (2.0 miles away, based in Largo, 4.8 stars from 330 reviews); SK Appliance Repair (7.4 miles away, based in Camp Springs, 5.0 stars from 404 reviews, lists Saturday hours); Sears Appliance Repair (6.8 miles away, based in Bowie, 4.3 stars from 426 reviews, lists Saturday hours); Sears Appliance Repair (7.3 miles away, based in Hyattsville, 4.4 stars from 398 reviews, lists Saturday hours).

Kenmore Dryer Lines and Features

What Makes Kenmore Dryer Repairs Different

On Kenmore Elite steam dryers, the display reports ductwork restriction in steps (d80, d90, d95) and a blinking CHECK VENT, which the guide says is an exhaust problem rather than a dryer failure. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)

Accela Steam dryers connect directly to the household water supply, so the inlet hose and water pressure (20 to 120 psi) become part of a steam-dryer service check. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)

Kenmore Dryer Symptoms and First Checks

• Dryer takes too long to dry. Kenmore says to clean the lint filter of lint and softener residue and check the exhaust duct for buildup or excess length. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
• Clothes wrinkled after drying. Kenmore says to remove clothes promptly, avoid overloading, and use Wrinkle Guard or a short touch-up cycle. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)

Kenmore Dryer Error Codes

Kenmore smart washers and dryers can check diagnostics through the Kenmore Smart app or Alexa and send app notices about blocked filters and other machine issues. Source: Kenmore - Kenmore Elite 81782 Smart 7.4 cu. ft. Electric Dryer with Accela Steam

Signs Your Kenmore Dryer Needs a Technician

• Burning or hot smell during a cycle
• Dryer shuts off a few minutes into the cycle
• Dryer will not start when you press Start

What Gets Fixed on a Glenarden Dryer Call

Owner Care for Kenmore Dryers

• If the lint screen looks clogged when held to the light, scrub it with hot soapy water and a stiff brush and let it dry fully before reinstalling. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
• Use only 4-inch rigid or semi-rigid metal duct (no plastic or foil), check it for lint monthly and clean it at least yearly; one Elite steam model allows about 65 feet with no elbows and 28 feet with four 90-degree elbows using a 4-inch hood. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)

Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.

What Kenmore Dryer Repairs Cost

A Kenmore dryer repair usually costs about the same as any other brand for the same part. Published ranges:

• Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
• Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
• Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
• Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
• Typical dryer repair: $100–$200 Source: Fixr - How much does it cost to repair a dryer?
• Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?

If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?

Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.

What to Have Ready for a Kenmore Dryer Call

• What happens when you press Start (no response, hum, runs with no heat, stops early)
• Any error code on the display
• Whether the dryer is gas or electric

Dryer Notes for Glenarden, MD

Most dryer calls in Glenarden come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.

Questions to Ask a Glenarden Technician

• How often do you repair Kenmore dryers, and do you carry common parts on the truck?
• Can you look at the washer on the same visit if it is acting up too?
• Can you give a written estimate before ordering parts?

Kenmore Dryer Repair FAQs: Glenarden, MD

Other Dryer Repair in Glenarden

More Kenmore Dryer Repair Pages Nearby

Write down any error code your Kenmore dryer shows and when it appears. It helps a Glenarden technician bring the right parts.