If your Kenmore dryer has stopped heating, stopped tumbling or started throwing an error code, the technician you call should know the model line. We flag companies whose listing or website mentions Kenmore and fill in with nearby dryer repair companies so you always have options.
Washer and Dryer Repair is independent and not affiliated with Kenmore. Listed companies are independent technicians who repair Kenmore dryers and other brands.
If you bought your Kenmore at Sears, you do not need to go back to Sears for a repair. Independent technicians near Detroit Lakes work on Kenmore dryers every week.
Independent Kenmore Dryer Technicians, Detroit Lakes MN
11 repair companies serve Detroit Lakes from within 60 miles. 1 list an address in Detroit Lakes, and other nearby bases include Fargo (5), Moorhead (2), and Pelican Rapids (1). The farthest listed company is about 52 miles out. The closest is D & D Appliance, Inc., about 1.3 miles away. 1 lists Kenmore specifically. Rated companies nearby average 4.4 stars across 11 businesses. Detroit Lakes is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Repair companies inside 60 miles | 11 |
|---|---|
| Three nearest companies, miles away | 1.3, 11.8, 44.0 |
| With 4.5+ stars and at least 10 reviews | 6 |
| Mention Kenmore | 1 |
| Open on Saturdays (per listing) | 5 |
| List dryer or washer & dryer work | 2 |
The leading options for Detroit Lakes are Sears Appliance Repair (52.2 miles away, based in Wahpeton, 4.2 stars from 19 reviews, lists Saturday hours); D & D Appliance, Inc. (1.3 miles away, 4.9 stars from 34 reviews); Pete’s Appliance Repair LLC (46.7 miles away, based in Fargo, 4.9 stars from 237 reviews); Glen Smith Appliance Repair. (11.8 miles away, based in Pelican Rapids, 5.0 stars from 2 reviews, lists Saturday hours).
Know Your Kenmore Dryer
What a Kenmore Dryer Technician Deals With
On Kenmore Elite steam dryers, the display reports ductwork restriction in steps (d80, d90, d95) and a blinking CHECK VENT, which the guide says is an exhaust problem rather than a dryer failure. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
SmartDry Ultra dryers combine two moisture sensors with a temperature monitor and a dual heating element to fine-tune heat and cycle length. Source: Kenmore - 8.8 cu. ft. Electric Dryer w/ SmartDry Ultra Technology
What Kenmore Says to Check First
- Check Vent light blinking. Kenmore says the exhaust is seriously restricted and the ducts should be cleaned and inspected before using the dryer again. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer vibrating or noisy. Kenmore says to level the dryer on its four feet without extending them more than needed and keep at least an inch of clearance at the sides and back. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Dryer Codes Mean
| Code | What it means |
|---|---|
| CHECK FILTER (Elite steam dryers) | A reminder to clean the lint filter before the load. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| HS (Elite steam dryers) | The humidity (moisture) sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| PF / nP (Elite steam dryers) | A power supply or cord connection problem; check the cord at the terminal block and the house fuse or breaker. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Signs Your Kenmore Dryer Needs a Technician
- Drum will not turn even though you hear a hum
- Drum turns but the air stays cool
- Dryer will not start when you press Start
What a Dryer Repair Technician Checks
Owner Care for Kenmore Dryers
- Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
- Use only 4-inch rigid or semi-rigid metal duct (no plastic or foil), check it for lint monthly and clean it at least yearly; one Elite steam model allows about 65 feet with no elbows and 28 feet with four 90-degree elbows using a 4-inch hood. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
What Kenmore Dryer Repairs Cost
Most Kenmore dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair (most homeowners): $100–$430 Source: Angi - How Much Does Dryer Repair Cost?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- How long the vent run is and where it exits the house
- Whether the dryer is gas or electric
- The brand, model and serial number from the label inside the door or on the back panel
Around Detroit Lakes
Most dryer calls in Detroit Lakes come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Minnesota has no state license for mechanical contractors or their workers; businesses contracting for gas, heating, cooling or refrigeration work file a mechanical contractor bond with the Department of Labor and Industry, and some cities require their own licenses or competency cards. Source: DLI: Mechanical contractor bond requirements
The state does not license gas fitters; contractors doing gas work must be bonded with the Department of Labor and Industry, and cities such as Minneapolis and St. Paul set their own gas fitter licensing. Source: DLI: Mechanical contractor bond requirements
How to Choose a Dryer Technician Near Detroit Lakes
- If a part has to be ordered, how soon can you come back to finish?
- Will you check the vent and lint path as part of the visit?
- How often do you repair Kenmore dryers, and do you carry common parts on the truck?
Kenmore Dryer Repair FAQs: Detroit Lakes, MN
Why do my clothes come out damp?
Do you work for Kenmore?
Is my Kenmore dryer worth repairing?
More Laundry Repair in Detroit Lakes, MN
Kenmore Dryer Repair in Nearby Cities
Write down any error code your Kenmore dryer shows and when it appears. It helps a Detroit Lakes technician bring the right parts.