Most Kenmore dryer repairs in Moorhead involve the same few systems: heat, airflow, the drum drive and the controls. Below are independent repair companies serving Moorhead, with those that mention Kenmore first, then the nearest dryer repair companies.
Washer and Dryer Repair is independent and not affiliated with Kenmore. Listed companies are independent technicians who repair Kenmore dryers and other brands.
If you bought your Kenmore at Sears, you do not need to go back to Sears for a repair. Independent technicians near Moorhead work on Kenmore dryers every week.
Kenmore Dryer Repair Near Moorhead
10 repair companies serve Moorhead from within 60 miles. 2 of them are based in Moorhead itself, and other nearby bases include Fargo (5), Pelican Rapids (1), and Detroit Lakes (1). Distances run up to about 42 miles. Nearest on the list: Rigels Appliance Store, around 1.2 miles out. Of those, 1 mentions Kenmore by name. The 10 rated companies in range average 4.3 stars. Moorhead is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Companies are shown by relevance and distance from Moorhead. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Show laundry appliance work | 2 |
|---|---|
| Open on Saturdays (per listing) | 5 |
| Distance to the three closest (mi) | 1.2, 2.3, 2.9 |
| Mention Kenmore | 1 |
| With 4.5+ stars and at least 10 reviews | 5 |
| Repair companies inside 60 miles | 10 |
At the top of the Moorhead list: Sears Appliance Repair (42.1 miles away, based in Wahpeton, 4.2 stars from 19 reviews, lists Saturday hours); Pete’s Appliance Repair LLC (4.0 miles away, based in Fargo, 4.9 stars from 237 reviews); Rigels Appliance Store (1.2 miles away, 3.7 stars from 175 reviews, lists Saturday hours); Appliance Pros (4.1 miles away, based in Fargo, 4.8 stars from 127 reviews).
Know Your Kenmore Dryer
What Makes Kenmore Dryer Repairs Different
SmartDry Ultra dryers combine two moisture sensors with a temperature monitor and a dual heating element to fine-tune heat and cycle length. Source: Kenmore - 8.8 cu. ft. Electric Dryer w/ SmartDry Ultra Technology
Kenmore Dryer Symptoms and First Checks
- Dryer not heating. Kenmore says to check for a tripped breaker or blown fuse and, on gas models, confirm the gas supply is on, noting an electric dryer can tumble without heat on a partial circuit. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer won't start. Kenmore says to confirm the cord is fully plugged into a grounded outlet and the breaker is intact, and to turn off Control Lock if buttons beep but nothing happens. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Kenmore Dryer Error Codes
| Code | What it means |
|---|---|
| PF / nP (Elite steam dryers) | A power supply or cord connection problem; check the cord at the terminal block and the house fuse or breaker. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| CL (Elite steam dryers) | Control Lock is on. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| PS (Elite steam dryers) | The power cord on an electric model is wired incorrectly; check the neutral on the center terminal. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore Dryer Problems Worth a Service Call
- Dryer shuts off a few minutes into the cycle
- Burning or hot smell during a cycle
- Cycles take two or three runs to finish
What a Dryer Repair Technician Checks
Owner Care for Kenmore Dryers
- Use only 4-inch rigid or semi-rigid metal duct (no plastic or foil), check it for lint monthly and clean it at least yearly; one Elite steam model allows about 65 feet with no elbows and 28 feet with four 90-degree elbows using a 4-inch hood. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
What Kenmore Dryer Repairs Cost
A Kenmore dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- Any error code on the display
- The brand, model and serial number from the label inside the door or on the back panel
- How long the vent run is and where it exits the house
Dryer Notes for Moorhead, MN
Most dryer calls in Moorhead come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Minnesota has no state license for mechanical contractors or their workers; businesses contracting for gas, heating, cooling or refrigeration work file a mechanical contractor bond with the Department of Labor and Industry, and some cities require their own licenses or competency cards. Source: DLI: Mechanical contractor bond requirements
The state does not license gas fitters; contractors doing gas work must be bonded with the Department of Labor and Industry, and cities such as Minneapolis and St. Paul set their own gas fitter licensing. Source: DLI: Mechanical contractor bond requirements
How to Choose a Dryer Technician Near Moorhead
- Will you check the vent and lint path as part of the visit?
- Can you look at the washer on the same visit if it is acting up too?
- What guarantee do you give on parts and labor?
Kenmore Dryer Repair FAQs: Moorhead, MN
How do I find a technician who knows Kenmore dryers?
Why does my Kenmore dryer show an error code?
Why is my dryer running but not heating?
Related Repair Pages for Moorhead
More Kenmore Dryer Repair Pages Nearby
Write down any error code your Kenmore dryer shows and when it appears. It helps a Moorhead technician bring the right parts.