Most Kenmore dryer repairs in Fergus Falls involve the same few systems: heat, airflow, the drum drive and the controls. The Fergus Falls list starts with companies that name Kenmore, followed by other appliance repair companies that list dryer work.
Washer and Dryer Repair is independent and not affiliated with Kenmore. Listed companies are independent technicians who repair Kenmore dryers and other brands.
Kenmore appliances were sold through Sears for decades, so many owners look for Sears dryer repair. The companies here are independent technicians who work on Kenmore and Kenmore Elite dryers; they are not Sears.
Who Works on Kenmore Dryers Near Fergus Falls
Our data shows 12 appliance repair companies inside a 60-mile radius of Fergus Falls. The rest are spread across Fargo (5), Alexandria (2), and Moorhead (2). The farthest listed company is about 57 miles out. 1 lists Kenmore specifically. Sears Appliance Repair is the nearest, roughly 25.6 miles from Fergus Falls. The 12 rated companies in range average 4.4 stars. Because the nearest shops are farther out, ask each company whether Fergus Falls is inside its regular service area.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention Kenmore | 1 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 7 |
| Open on Saturdays (per listing) | 6 |
| List dryer or washer & dryer work | 3 |
| Three nearest companies, miles away | 25.6, 31.0, 38.3 |
| Repair companies inside 60 miles | 12 |
At the top of the Fergus Falls list: Sears Appliance Repair (25.6 miles away, based in Wahpeton, 4.2 stars from 19 reviews, lists Saturday hours); Sears Appliance Repair (44.3 miles away, based in Alexandria, 4.6 stars from 19 reviews, lists Saturday hours); Pete’s Appliance Repair LLC (53.3 miles away, based in Fargo, 4.9 stars from 237 reviews); D & D Appliance, Inc. (38.3 miles away, based in Detroit Lakes, 4.9 stars from 34 reviews).
Know Your Kenmore Dryer
What Makes Kenmore Dryer Repairs Different
Kenmore's Check Vent sensor alerts the owner when the dryer is not moving enough air to the outside. Source: Kenmore - Laundry List: Kenmore Dryer Buying Guide
Common Kenmore Dryer Problems
- Dryer takes too long to dry. Kenmore says to clean the lint filter of lint and softener residue and check the exhaust duct for buildup or excess length. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer vibrating or noisy. Kenmore says to level the dryer on its four feet without extending them more than needed and keep at least an inch of clearance at the sides and back. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Dryer Codes Mean
| Code | What it means |
|---|---|
| gAS (Elite steam dryers) | The gas supply is off on a gas model; open the house and dryer gas shutoffs. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| PS (Elite steam dryers) | The power cord on an electric model is wired incorrectly; check the neutral on the center terminal. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| CHECK FILTER (Elite steam dryers) | A reminder to clean the lint filter before the load. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore smart washers and dryers can check diagnostics through the Kenmore Smart app or Alexa and send app notices about blocked filters and other machine issues. Source: Kenmore - Kenmore Elite 81782 Smart 7.4 cu. ft. Electric Dryer with Accela Steam
Signs Your Kenmore Dryer Needs a Technician
- Dryer shuts off a few minutes into the cycle
- Squealing, thumping or grinding while it runs
- Outside of the cabinet gets unusually hot
What a Dryer Repair Technician Checks
Care Kenmore Recommends for Its Dryers
- Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
- Use only 4-inch rigid or semi-rigid metal duct (no plastic or foil), check it for lint monthly and clean it at least yearly; one Elite steam model allows about 65 feet with no elbows and 28 feet with four 90-degree elbows using a 4-inch hood. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Budgeting for a Kenmore Dryer Repair
Most Kenmore dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Typical dryer repair (most homeowners): $100–$430 Source: Angi - How Much Does Dryer Repair Cost?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- Any error code on the display
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- How long the vent run is and where it exits the house
Around Fergus Falls
Most dryer calls in Fergus Falls come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Minnesota has no state license for mechanical contractors or their workers; businesses contracting for gas, heating, cooling or refrigeration work file a mechanical contractor bond with the Department of Labor and Industry, and some cities require their own licenses or competency cards. Source: DLI: Mechanical contractor bond requirements
The state does not license gas fitters; contractors doing gas work must be bonded with the Department of Labor and Industry, and cities such as Minneapolis and St. Paul set their own gas fitter licensing. Source: DLI: Mechanical contractor bond requirements
Before You Book in Fergus Falls
- Can you give a written estimate before ordering parts?
- Will you check the vent and lint path as part of the visit?
- What guarantee do you give on parts and labor?
Kenmore Dryer Repair FAQs: Fergus Falls, MN
Should I repair or replace my Kenmore dryer?
Why do my clothes come out damp?
How do I find a technician who knows Kenmore dryers?
What should I do about a Kenmore error code?
Related Repair Pages for Fergus Falls
More Kenmore Dryer Repair Pages Nearby
Before you call, find the model and serial number on your Kenmore dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.