Most Kenmore dryer repairs in Mound involve the same few systems: heat, airflow, the drum drive and the controls. The Mound list starts with companies that name Kenmore, followed by other appliance repair companies that list dryer work.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by Kenmore. If your dryer is still under manufacturer coverage, contact Kenmore directly.
Kenmore appliances were sold through Sears for decades, so many owners look for Sears dryer repair. The companies here are independent technicians who work on Kenmore and Kenmore Elite dryers; they are not Sears.
Independent Kenmore Dryer Technicians, Mound MN
Our data shows 40 appliance repair companies inside a 30-mile radius of Mound. Other nearby bases include Eden Prairie (5), Hopkins (5), and Minneapolis (5). The farthest listed company is about 19 miles out. Nearest on the list: Wayzata Appliance Repair Service, around 2.4 miles out. No company within 30 miles of Mound names Kenmore in its listing, so the list adds matches from farther out and the closest appliance repair companies. Rated companies nearby average 4.5 stars across 21 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Rated 4.5 stars or higher (10+ reviews) | 19 |
|---|---|
| Open on Saturdays (per listing) | 47 |
| Mention Kenmore | 0 |
| Distance to the three closest (mi) | 2.4, 4.7, 5.0 |
| List dryer or washer & dryer work | 12 |
| Repair companies inside 30 miles | 60 |
At the top of the Mound list: Sears Appliance Repair (68.5 miles away, based in Willmar, 4.5 stars from 37 reviews, lists Saturday hours); West Metro Appliance Repair (7.3 miles away, based in Wayzata, 5.0 stars from 70 reviews, lists Saturday hours); West Metro Appliance Repair (11.8 miles away, based in Eden Prairie, 4.8 stars from 173 reviews, lists Saturday hours); Warners' Stellian Appliance (14.0 miles away, based in Shakopee, 4.7 stars from 1,015 reviews, lists Saturday hours).
Know Your Kenmore Dryer
What Makes Kenmore Dryer Repairs Different
Kenmore's compact condensing dryer needs no outside wall vent, runs on a 220V supply and offers manual-drain or direct-drain water removal. Source: Kenmore - 4.0 cu. ft. Front-Load Electric Condensing Dryer
Common Kenmore Dryer Problems
- Dryer takes too long to dry. Kenmore says to clean the lint filter of lint and softener residue and check the exhaust duct for buildup or excess length. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Check Vent light blinking. Kenmore says the exhaust is seriously restricted and the ducts should be cleaned and inspected before using the dryer again. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Dryer Codes Mean
| Code | What it means |
|---|---|
| gAS (Elite steam dryers) | The gas supply is off on a gas model; open the house and dryer gas shutoffs. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| CHECK FILTER (Elite steam dryers) | A reminder to clean the lint filter before the load. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| PF / nP (Elite steam dryers) | A power supply or cord connection problem; check the cord at the terminal block and the house fuse or breaker. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
When to Call for Kenmore Dryer Repair
- Clothes still damp after a full cycle
- Drum turns but the air stays cool
- Dryer shuts off a few minutes into the cycle
What Gets Fixed on a Mound Dryer Call
Owner Care for Kenmore Dryers
- If the lint screen looks clogged when held to the light, scrub it with hot soapy water and a stiff brush and let it dry fully before reinstalling. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Budgeting for a Kenmore Dryer Repair
A Kenmore dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair (most homeowners): $100–$430 Source: Angi - How Much Does Dryer Repair Cost?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- How long the vent run is and where it exits the house
- The brand, model and serial number from the label inside the door or on the back panel
- What happens when you press Start (no response, hum, runs with no heat, stops early)
Dryer Notes for Mound, MN
Most dryer calls in Mound come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Minnesota has no state license for mechanical contractors or their workers; businesses contracting for gas, heating, cooling or refrigeration work file a mechanical contractor bond with the Department of Labor and Industry, and some cities require their own licenses or competency cards. Source: DLI: Mechanical contractor bond requirements
The state does not license gas fitters; contractors doing gas work must be bonded with the Department of Labor and Industry, and cities such as Minneapolis and St. Paul set their own gas fitter licensing. Source: DLI: Mechanical contractor bond requirements
How to Choose a Dryer Technician Near Mound
- If a part has to be ordered, how soon can you come back to finish?
- What guarantee do you give on parts and labor?
- Do you work on gas dryers, and who handles anything involving the gas line?
Kenmore Dryer Repair FAQs: Mound, MN
Is this Kenmore customer service?
Why is my dryer running but not heating?
What should I do about a Kenmore error code?
Related Repair Pages for Mound
More Kenmore Dryer Repair Pages Nearby
Before you call, find the model and serial number on your Kenmore dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.