If your Kenmore dryer has stopped heating, stopped tumbling or started throwing an error code, the technician you call should know the model line. The New Ulm list starts with companies that name Kenmore, followed by other appliance repair companies that list dryer work.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by Kenmore. If your dryer is still under manufacturer coverage, contact Kenmore directly.
Kenmore dryers were made for Sears by several manufacturers over the years, so the model number matters more than the badge. Independent technicians can look up the parts from it.
Who Works on Kenmore Dryers Near New Ulm
29 repair companies serve New Ulm from within 60 miles. 3 of them are based in New Ulm itself, and other nearby bases include Mankato (5), Faribault (3), and Hutchinson (2). Distances run up to about 60 miles. No company within 60 miles of New Ulm names Kenmore in its listing, so the list adds matches from farther out and the closest appliance repair companies. The closest is Alwin/Klassen Appliance Repair, about 0.8 miles away. Across 23 rated companies, the average public rating is 4.5 stars. Because the nearest shops are farther out, ask each company whether New Ulm is inside its regular service area.
Companies are shown by relevance and distance from New Ulm. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Open on Saturdays (per listing) | 18 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 12 |
| Mention Kenmore | 0 |
| Distance to the three closest (mi) | 0.8, 1.6, 1.6 |
| Repair companies inside 60 miles | 29 |
| Show laundry appliance work | 6 |
The leading options for New Ulm are Sears Appliance Repair (61.6 miles away, based in Willmar, 4.5 stars from 37 reviews, lists Saturday hours); Sears Appliance Repair (1.6 miles away, 4.7 stars from 41 reviews, lists Saturday hours); Don's Appliance & TV of Minnesota (25.7 miles away, based in St Peter, 3.8 stars from 67 reviews, lists Saturday hours); Alwin/Klassen Appliance Repair (0.8 miles away, 4.7 stars from 15 reviews).
Know Your Kenmore Dryer
How Kenmore Dryers Are Built
SmartDry Ultra dryers combine two moisture sensors with a temperature monitor and a dual heating element to fine-tune heat and cycle length. Source: Kenmore - 8.8 cu. ft. Electric Dryer w/ SmartDry Ultra Technology
Kenmore's compact condensing dryer needs no outside wall vent, runs on a 220V supply and offers manual-drain or direct-drain water removal. Source: Kenmore - 4.0 cu. ft. Front-Load Electric Condensing Dryer
Common Kenmore Dryer Problems
- Dryer not heating. Kenmore says to check for a tripped breaker or blown fuse and, on gas models, confirm the gas supply is on, noting an electric dryer can tumble without heat on a partial circuit. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer vibrating or noisy. Kenmore says to level the dryer on its four feet without extending them more than needed and keep at least an inch of clearance at the sides and back. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Reading a Kenmore Dryer Error Code
| Code | What it means |
|---|---|
| gAS (Elite steam dryers) | The gas supply is off on a gas model; open the house and dryer gas shutoffs. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| CL (Elite steam dryers) | Control Lock is on. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| HS (Elite steam dryers) | The humidity (moisture) sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Signs Your Kenmore Dryer Needs a Technician
- Clothes still damp after a full cycle
- Burning or hot smell during a cycle
- Drum will not turn even though you hear a hum
What Gets Fixed on a New Ulm Dryer Call
Keeping a Kenmore Dryer Running
- If the lint screen looks clogged when held to the light, scrub it with hot soapy water and a stiff brush and let it dry fully before reinstalling. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
What Kenmore Dryer Repairs Cost
A Kenmore dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- Whether the dryer is gas or electric
- The brand, model and serial number from the label inside the door or on the back panel
- How long the vent run is and where it exits the house
Local Notes for New Ulm
Most dryer calls in New Ulm come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Minnesota has no state license for mechanical contractors or their workers; businesses contracting for gas, heating, cooling or refrigeration work file a mechanical contractor bond with the Department of Labor and Industry, and some cities require their own licenses or competency cards. Source: DLI: Mechanical contractor bond requirements
The state does not license gas fitters; contractors doing gas work must be bonded with the Department of Labor and Industry, and cities such as Minneapolis and St. Paul set their own gas fitter licensing. Source: DLI: Mechanical contractor bond requirements
Before You Book in New Ulm
- Is your company licensed where my state requires it, and insured?
- Do you work on gas dryers, and who handles anything involving the gas line?
- What guarantee do you give on parts and labor?
Kenmore Dryer Repair FAQs: New Ulm, MN
Why does my Kenmore dryer show an error code?
Is this Kenmore customer service?
Why is my dryer running but not heating?
More Laundry Repair in New Ulm, MN
Kenmore Dryer Repair Near New Ulm
Write down any error code your Kenmore dryer shows and when it appears. It helps a New Ulm technician bring the right parts.