If your Kenmore dryer has stopped heating, stopped tumbling or started throwing an error code, the technician you call should know the model line. Below are independent repair companies serving Sauk Rapids, with those that mention Kenmore first, then the nearest dryer repair companies.
This is an independent directory. We are not affiliated with Kenmore, and the technicians listed are independent repair companies, not the manufacturer.
Kenmore dryers were made for Sears by several manufacturers over the years, so the model number matters more than the badge. Independent technicians can look up the parts from it.
Independent Kenmore Dryer Technicians, Sauk Rapids MN
We found 14 appliance repair companies within 30 miles of Sauk Rapids. 2 list an address in Sauk Rapids, and the rest are spread across St Cloud (6), Kimball (1), and Richmond (1). Distances run up to about 30 miles. No company within 30 miles of Sauk Rapids names Kenmore in its listing, so the list adds matches from farther out and the closest appliance repair companies. Master Trade Services Inc is the nearest, roughly 1.2 miles from Sauk Rapids. Rated companies nearby average 4.7 stars across 14 businesses.
Companies are shown by relevance and distance from Sauk Rapids. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| List dryer or washer & dryer work | 4 |
|---|---|
| Companies within 30 miles | 14 |
| With 4.5+ stars and at least 10 reviews | 7 |
| Three nearest companies, miles away | 1.2, 2.9, 3.3 |
| Open on Saturdays (per listing) | 7 |
| Mention Kenmore | 0 |
At the top of the Sauk Rapids list: Sears Appliance Repair (54.8 miles away, based in Willmar, 4.5 stars from 37 reviews, lists Saturday hours); Omega Force Appliance Repair (4.4 miles away, based in St Cloud, 4.8 stars from 199 reviews, lists Saturday hours); M & H Appliance and Home Furnishings (3.8 miles away, based in St Cloud, 4.8 stars from 1,054 reviews, lists Saturday hours); Home Appliance Service (26.5 miles away, based in Maple Lake, 5.0 stars from 230 reviews, lists Saturday hours).
Kenmore Dryer Lines and Features
What a Kenmore Dryer Technician Deals With
Kenmore's compact condensing dryer needs no outside wall vent, runs on a 220V supply and offers manual-drain or direct-drain water removal. Source: Kenmore - 4.0 cu. ft. Front-Load Electric Condensing Dryer
Common Kenmore Dryer Problems
- Dryer won't start. Kenmore says to confirm the cord is fully plugged into a grounded outlet and the breaker is intact, and to turn off Control Lock if buttons beep but nothing happens. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer vibrating or noisy. Kenmore says to level the dryer on its four feet without extending them more than needed and keep at least an inch of clearance at the sides and back. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Reading a Kenmore Dryer Error Code
| Code | What it means |
|---|---|
| CL (Elite steam dryers) | Control Lock is on. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| PS (Elite steam dryers) | The power cord on an electric model is wired incorrectly; check the neutral on the center terminal. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| gAS (Elite steam dryers) | The gas supply is off on a gas model; open the house and dryer gas shutoffs. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore smart washers and dryers can check diagnostics through the Kenmore Smart app or Alexa and send app notices about blocked filters and other machine issues. Source: Kenmore - Kenmore Elite 81782 Smart 7.4 cu. ft. Electric Dryer with Accela Steam
Signs Your Kenmore Dryer Needs a Technician
- Clothes still damp after a full cycle
- Dryer shuts off a few minutes into the cycle
- Dryer will not start when you press Start
Inside a Dryer Repair Visit
Owner Care for Kenmore Dryers
- Use only 4-inch rigid or semi-rigid metal duct (no plastic or foil), check it for lint monthly and clean it at least yearly; one Elite steam model allows about 65 feet with no elbows and 28 feet with four 90-degree elbows using a 4-inch hood. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- If the lint screen looks clogged when held to the light, scrub it with hot soapy water and a stiff brush and let it dry fully before reinstalling. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Budgeting for a Kenmore Dryer Repair
A Kenmore dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair: $100–$200 Source: Fixr - How much does it cost to repair a dryer?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- Whether the dryer is gas or electric
- The brand, model and serial number from the label inside the door or on the back panel
Local Notes for Sauk Rapids
Most dryer calls in Sauk Rapids come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Minnesota has no state license for mechanical contractors or their workers; businesses contracting for gas, heating, cooling or refrigeration work file a mechanical contractor bond with the Department of Labor and Industry, and some cities require their own licenses or competency cards. Source: DLI: Mechanical contractor bond requirements
The state does not license gas fitters; contractors doing gas work must be bonded with the Department of Labor and Industry, and cities such as Minneapolis and St. Paul set their own gas fitter licensing. Source: DLI: Mechanical contractor bond requirements
Before You Book in Sauk Rapids
- Do you work on gas dryers, and who handles anything involving the gas line?
- If a part has to be ordered, how soon can you come back to finish?
- What guarantee do you give on parts and labor?
Kenmore Dryer Repair FAQs: Sauk Rapids, MN
Do you work for Kenmore?
What should I do about a Kenmore error code?
Is my Kenmore dryer worth repairing?
Which Sauk Rapids technicians work on Kenmore?
Related Repair Pages for Sauk Rapids
Kenmore Dryer Repair Near Sauk Rapids
Before you call, find the model and serial number on your Kenmore dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.