Kenmore owners in Savage usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving Savage, with those that mention Kenmore first, then the nearest dryer repair companies.
This is an independent directory. We are not affiliated with Kenmore, and the technicians listed are independent repair companies, not the manufacturer.
Kenmore dryers were made for Sears by several manufacturers over the years, so the model number matters more than the badge. Independent technicians can look up the parts from it.
Kenmore Dryer Repair Near Savage
Our data shows 40 appliance repair companies inside a 30-mile radius of Savage. 3 of them are based in Savage itself, and the rest are spread across Burnsville (5), Eden Prairie (5), and Minneapolis (5). Distances run up to about 15 miles. Nearest on the list: Appliance Repair Pro, around 1.4 miles out. No company within 30 miles of Savage names Kenmore in its listing, so the list adds matches from farther out and the closest appliance repair companies. The 29 rated companies in range average 4.3 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Distance to the three closest (mi) | 1.4, 1.4, 1.6 |
|---|---|
| Mention Kenmore | 0 |
| Companies within 30 miles | 60 |
| Show laundry appliance work | 17 |
| Rated 4.5 stars or higher (10+ reviews) | 24 |
| Listing Saturday hours | 47 |
Closest matches for Savage: Sears Appliance Repair (85.6 miles away, based in Willmar, 4.5 stars from 37 reviews, lists Saturday hours); Appliance Repair Pro (1.4 miles away, 5.0 stars from 500 reviews, lists Saturday hours); Tony's Appliance (2.8 miles away, based in Burnsville, 4.9 stars from 1,214 reviews, lists Saturday hours); West Metro Appliance Repair (8.6 miles away, based in Eden Prairie, 4.8 stars from 173 reviews, lists Saturday hours).
Kenmore Dryer Lines and Features
What a Kenmore Dryer Technician Deals With
On Kenmore Elite steam dryers, the display reports ductwork restriction in steps (d80, d90, d95) and a blinking CHECK VENT, which the guide says is an exhaust problem rather than a dryer failure. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Kenmore Dryer Symptoms and First Checks
- Dryer takes too long to dry. Kenmore says to clean the lint filter of lint and softener residue and check the exhaust duct for buildup or excess length. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer vibrating or noisy. Kenmore says to level the dryer on its four feet without extending them more than needed and keep at least an inch of clearance at the sides and back. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Kenmore Dryer Error Codes
| Code | What it means |
|---|---|
| CHECK FILTER (Elite steam dryers) | A reminder to clean the lint filter before the load. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| CL (Elite steam dryers) | Control Lock is on. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| tE1-tE7 (Elite steam dryers) | A temperature sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore smart washers and dryers can check diagnostics through the Kenmore Smart app or Alexa and send app notices about blocked filters and other machine issues. Source: Kenmore - Kenmore Elite 81782 Smart 7.4 cu. ft. Electric Dryer with Accela Steam
Signs Your Kenmore Dryer Needs a Technician
- Squealing, thumping or grinding while it runs
- Drum will not turn even though you hear a hum
- Burning or hot smell during a cycle
Inside a Dryer Repair Visit
Owner Care for Kenmore Dryers
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
- Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Kenmore Dryer Repair Cost Ranges
A Kenmore dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- How long the vent run is and where it exits the house
- Whether the dryer is gas or electric
- Any error code on the display
Local Notes for Savage
Most dryer calls in Savage come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Minnesota has no state license for mechanical contractors or their workers; businesses contracting for gas, heating, cooling or refrigeration work file a mechanical contractor bond with the Department of Labor and Industry, and some cities require their own licenses or competency cards. Source: DLI: Mechanical contractor bond requirements
The state does not license gas fitters; contractors doing gas work must be bonded with the Department of Labor and Industry, and cities such as Minneapolis and St. Paul set their own gas fitter licensing. Source: DLI: Mechanical contractor bond requirements
Hiring a Dryer Repair Company in Savage
- If a part has to be ordered, how soon can you come back to finish?
- What is the service call or diagnostic fee, and is it applied to the repair?
- Is your company licensed where my state requires it, and insured?
Kenmore Dryer Repair FAQs: Savage, MN
How do I find a technician who knows Kenmore dryers?
Why does my Kenmore dryer show an error code?
Should I repair or replace my Kenmore dryer?
Other Dryer Repair in Savage
Kenmore Dryer Repair in Nearby Cities
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a Kenmore repair.