Most Kenmore dryer repairs in Lexington involve the same few systems: heat, airflow, the drum drive and the controls. The Lexington list starts with companies that name Kenmore, followed by other appliance repair companies that list dryer work.
Washer and Dryer Repair is independent and not affiliated with Kenmore. Listed companies are independent technicians who repair Kenmore dryers and other brands.
Kenmore dryers were made for Sears by several manufacturers over the years, so the model number matters more than the badge. Independent technicians can look up the parts from it.
Kenmore Dryer Repair Near Lexington
Within 30 miles of Lexington there are 40 appliance repair companies in our data. 3 list an address in Lexington, and other nearby bases include High Point (10), Salisbury (8), and Thomasville (6). The farthest listed company is about 24 miles out. None of the repair companies near Lexington name Kenmore in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. The closest is Prestige Appliance Repair Lexington Solutions, about 0.7 miles away. Rated companies nearby average 4.7 stars across 21 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Open on Saturdays (per listing) | 40 |
|---|---|
| Appliance repair companies in range (30 mi) | 55 |
| With 4.5+ stars and at least 10 reviews | 10 |
| Distance to the three closest (mi) | 0.7, 0.7, 4.8 |
| Show laundry appliance work | 6 |
| Mention Kenmore | 0 |
The leading options for Lexington are Sears Appliance Repair (17.1 miles away, based in Clemmons, 4.6 stars from 290 reviews, lists Saturday hours); Davie Major Appliance Repair (18.0 miles away, based in Mocksville, 4.9 stars from 188 reviews); Sears Appliance Repair (14.7 miles away, based in Salisbury, 4.4 stars from 77 reviews, lists Saturday hours); Convenient Appliance Service (20.1 miles away, based in Winston-Salem, 4.9 stars from 2,279 reviews).
Kenmore Dryer Features Technicians Work On
What a Kenmore Dryer Technician Deals With
On Kenmore Elite steam dryers, the display reports ductwork restriction in steps (d80, d90, d95) and a blinking CHECK VENT, which the guide says is an exhaust problem rather than a dryer failure. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Kenmore's compact condensing dryer needs no outside wall vent, runs on a 220V supply and offers manual-drain or direct-drain water removal. Source: Kenmore - 4.0 cu. ft. Front-Load Electric Condensing Dryer
What Kenmore Says to Check First
- Dryer not heating. Kenmore says to check for a tripped breaker or blown fuse and, on gas models, confirm the gas supply is on, noting an electric dryer can tumble without heat on a partial circuit. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Clothes wrinkled after drying. Kenmore says to remove clothes promptly, avoid overloading, and use Wrinkle Guard or a short touch-up cycle. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Dryer Codes Mean
| Code | What it means |
|---|---|
| CHECK FILTER (Elite steam dryers) | A reminder to clean the lint filter before the load. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| gAS (Elite steam dryers) | The gas supply is off on a gas model; open the house and dryer gas shutoffs. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| PS (Elite steam dryers) | The power cord on an electric model is wired incorrectly; check the neutral on the center terminal. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore Dryer Problems Worth a Service Call
- Outside of the cabinet gets unusually hot
- Drum will not turn even though you hear a hum
- Clothes still damp after a full cycle
Inside a Dryer Repair Visit
Owner Care for Kenmore Dryers
- Use only 4-inch rigid or semi-rigid metal duct (no plastic or foil), check it for lint monthly and clean it at least yearly; one Elite steam model allows about 65 feet with no elbows and 28 feet with four 90-degree elbows using a 4-inch hood. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Kenmore Dryer Repair Cost Ranges
Price the repair before replacing a Kenmore dryer. Published ranges for common jobs:
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair (most homeowners): $100–$430 Source: Angi - How Much Does Dryer Repair Cost?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- Whether the dryer is gas or electric
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- The brand, model and serial number from the label inside the door or on the back panel
Local Notes for Lexington
Most dryer calls in Lexington come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
North Carolina has no license specific to appliance repair; work on gas appliances, fuel piping and heating equipment is regulated by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors, with an exemption for minor repairs that don't change fuel type, venting or piping. Source: N.C. Gen. Stat. § 87-21 (NC General Assembly)
Gas and fuel piping installation requires a plumbing or heating license, or a restricted fuel piping license, issued by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors. Source: N.C. Gen. Stat. § 87-21 (NC General Assembly)
Before You Book in Lexington
- Will you check the vent and lint path as part of the visit?
- What guarantee do you give on parts and labor?
- Is your company licensed where my state requires it, and insured?
Kenmore Dryer Repair FAQs: Lexington, NC
Which Lexington technicians work on Kenmore?
What should I do about a Kenmore error code?
Why is my dryer running but not heating?
Should I repair or replace my Kenmore dryer?
Other Dryer Repair in Lexington
Kenmore Dryer Repair Near Lexington
Write down any error code your Kenmore dryer shows and when it appears. It helps a Lexington technician bring the right parts.