Most Kenmore dryer repairs in Winston-Salem involve the same few systems: heat, airflow, the drum drive and the controls. We flag companies whose listing or website mentions Kenmore and fill in with nearby dryer repair companies so you always have options.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by Kenmore. If your dryer is still under manufacturer coverage, contact Kenmore directly.
If you bought your Kenmore at Sears, you do not need to go back to Sears for a repair. Independent technicians near Winston-Salem work on Kenmore dryers every week.
Kenmore Dryer Repair Near Winston-Salem
Our data shows 40 appliance repair companies inside a 30-mile radius of Winston-Salem. 9 of them are based in Winston-Salem itself, and the rest are spread across High Point (11), Thomasville (6), and Kernersville (5). Advance Appliance. is the nearest, roughly 0.9 miles from Winston-Salem. None of the repair companies near Winston-Salem name Kenmore in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. The 20 rated companies in range average 4.6 stars.
Companies are shown by relevance and distance from Winston-Salem. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| With 4.5+ stars and at least 10 reviews | 12 |
|---|---|
| Mention Kenmore | 0 |
| Companies within 30 miles | 57 |
| Distance to the three closest (mi) | 0.9, 1.1, 1.5 |
| Open on Saturdays (per listing) | 39 |
| Show laundry appliance work | 6 |
The leading options for Winston-Salem are Sears Appliance Repair (8.3 miles away, based in Clemmons, 4.6 stars from 290 reviews, lists Saturday hours); Convenient Appliance Service (3.4 miles away, 4.9 stars from 2,279 reviews); Prime Appliance Repair (4.6 miles away, 5.0 stars from 8 reviews); John Michael & Associates, Inc. (16.6 miles away, based in High Point, 4.7 stars from 230 reviews).
Kenmore Dryer Features Technicians Work On
What Makes Kenmore Dryer Repairs Different
SmartDry Ultra dryers combine two moisture sensors with a temperature monitor and a dual heating element to fine-tune heat and cycle length. Source: Kenmore - 8.8 cu. ft. Electric Dryer w/ SmartDry Ultra Technology
What Kenmore Says to Check First
- Dryer won't start. Kenmore says to confirm the cord is fully plugged into a grounded outlet and the breaker is intact, and to turn off Control Lock if buttons beep but nothing happens. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Check Vent light blinking. Kenmore says the exhaust is seriously restricted and the ducts should be cleaned and inspected before using the dryer again. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Dryer Codes Mean
| Code | What it means |
|---|---|
| d80 / d90 / d95 (Elite steam dryers) | The exhaust ductwork is roughly 80, 90 or 95 percent blocked; stop using the dryer until the vent is cleaned or repaired. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| PF / nP (Elite steam dryers) | A power supply or cord connection problem; check the cord at the terminal block and the house fuse or breaker. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| gAS (Elite steam dryers) | The gas supply is off on a gas model; open the house and dryer gas shutoffs. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore smart washers and dryers can check diagnostics through the Kenmore Smart app or Alexa and send app notices about blocked filters and other machine issues. Source: Kenmore - Kenmore Elite 81782 Smart 7.4 cu. ft. Electric Dryer with Accela Steam
Kenmore Dryer Problems Worth a Service Call
- Squealing, thumping or grinding while it runs
- Dryer will not start when you press Start
- Burning or hot smell during a cycle
Inside a Dryer Repair Visit
Care Kenmore Recommends for Its Dryers
- If the lint screen looks clogged when held to the light, scrub it with hot soapy water and a stiff brush and let it dry fully before reinstalling. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
What Kenmore Dryer Repairs Cost
A Kenmore dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair (most homeowners): $100–$430 Source: Angi - How Much Does Dryer Repair Cost?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- Whether the dryer is gas or electric
- The brand, model and serial number from the label inside the door or on the back panel
- Any error code on the display
What Winston-Salem Owners Should Know
Most dryer calls in Winston-Salem come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
North Carolina has no license specific to appliance repair; work on gas appliances, fuel piping and heating equipment is regulated by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors, with an exemption for minor repairs that don't change fuel type, venting or piping. Source: N.C. Gen. Stat. § 87-21 (NC General Assembly)
Gas and fuel piping installation requires a plumbing or heating license, or a restricted fuel piping license, issued by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors. Source: N.C. Gen. Stat. § 87-21 (NC General Assembly)
Questions to Ask a Winston-Salem Technician
- Can you give a written estimate before ordering parts?
- If a part has to be ordered, how soon can you come back to finish?
- What guarantee do you give on parts and labor?
Kenmore Dryer Repair FAQs: Winston-Salem, NC
How do I find a technician who knows Kenmore dryers?
Why does my dryer take so long to dry?
Why does my Kenmore dryer show an error code?
Related Repair Pages for Winston-Salem
Kenmore Dryer Repair Near Winston-Salem
Before you call, find the model and serial number on your Kenmore dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.