Kenmore owners in Stallings usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving Stallings, with those that mention Kenmore first, then the nearest dryer repair companies.
This is an independent directory. We are not affiliated with Kenmore, and the technicians listed are independent repair companies, not the manufacturer.
Kenmore dryers were made for Sears by several manufacturers over the years, so the model number matters more than the badge. Independent technicians can look up the parts from it.
Kenmore Dryer Repair Near Stallings
40 repair companies serve Stallings from within 30 miles. The rest are spread across Matthews (12), Monroe (12), and Charlotte (8). Distances run up to about 11 miles. No company within 30 miles of Stallings names Kenmore in its listing, so the list adds matches from farther out and the closest appliance repair companies. Appliance Repair Technologies Indian Trail is the nearest, roughly 1.8 miles from Stallings. Rated companies nearby average 4.9 stars across 34 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Distance to the three closest (mi) | 1.8, 2.2, 2.4 |
|---|---|
| Listing Saturday hours | 44 |
| Mention Kenmore | 0 |
| Show laundry appliance work | 19 |
| Appliance repair companies in range (30 mi) | 60 |
| Rated 4.5 stars or higher (10+ reviews) | 33 |
First up for Stallings: Sears Appliance Repair (60.7 miles away, based in Lugoff, 4.3 stars from 46 reviews, lists Saturday hours); Urgent Appliance Repair (7.6 miles away, based in Monroe, 5.0 stars from 159 reviews, lists Saturday hours); Almaks Appliance Repair in Charlotte (4.1 miles away, based in Matthews, 4.9 stars from 67 reviews); Prime Appliance Repair (2.7 miles away, based in Indian Trail, 5.0 stars from 70 reviews, lists Saturday hours).
Know Your Kenmore Dryer
How Kenmore Dryers Are Built
Kenmore's Check Vent sensor alerts the owner when the dryer is not moving enough air to the outside. Source: Kenmore - Laundry List: Kenmore Dryer Buying Guide
Common Kenmore Dryer Problems
- Dryer takes too long to dry. Kenmore says to clean the lint filter of lint and softener residue and check the exhaust duct for buildup or excess length. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer won't start. Kenmore says to confirm the cord is fully plugged into a grounded outlet and the breaker is intact, and to turn off Control Lock if buttons beep but nothing happens. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Dryer Codes Mean
| Code | What it means |
|---|---|
| PF / nP (Elite steam dryers) | A power supply or cord connection problem; check the cord at the terminal block and the house fuse or breaker. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| d80 / d90 / d95 (Elite steam dryers) | The exhaust ductwork is roughly 80, 90 or 95 percent blocked; stop using the dryer until the vent is cleaned or repaired. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| HS (Elite steam dryers) | The humidity (moisture) sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore smart washers and dryers can check diagnostics through the Kenmore Smart app or Alexa and send app notices about blocked filters and other machine issues. Source: Kenmore - Kenmore Elite 81782 Smart 7.4 cu. ft. Electric Dryer with Accela Steam
Kenmore Dryer Problems Worth a Service Call
- Squealing, thumping or grinding while it runs
- Drum will not turn even though you hear a hum
- Dryer will not start when you press Start
Inside a Dryer Repair Visit
Owner Care for Kenmore Dryers
- If the lint screen looks clogged when held to the light, scrub it with hot soapy water and a stiff brush and let it dry fully before reinstalling. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Budgeting for a Kenmore Dryer Repair
A Kenmore dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair: $100–$200 Source: Fixr - How much does it cost to repair a dryer?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- Whether the dryer is gas or electric
- Any error code on the display
- What happens when you press Start (no response, hum, runs with no heat, stops early)
Local Notes for Stallings
Most dryer calls in Stallings come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
North Carolina has no license specific to appliance repair; work on gas appliances, fuel piping and heating equipment is regulated by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors, with an exemption for minor repairs that don't change fuel type, venting or piping. Source: N.C. Gen. Stat. § 87-21 (NC General Assembly)
Gas and fuel piping installation requires a plumbing or heating license, or a restricted fuel piping license, issued by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors. Source: N.C. Gen. Stat. § 87-21 (NC General Assembly)
Questions to Ask a Stallings Technician
- Can you look at the washer on the same visit if it is acting up too?
- How often do you repair Kenmore dryers, and do you carry common parts on the truck?
- If a part has to be ordered, how soon can you come back to finish?
Kenmore Dryer Repair FAQs: Stallings, NC
What makes a dryer stop heating?
Which Stallings technicians work on Kenmore?
Why do my clothes come out damp?
Related Repair Pages for Stallings
Kenmore Dryer Repair Near Stallings
Before you call, find the model and serial number on your Kenmore dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.