If your Kenmore dryer has stopped heating, stopped tumbling or started throwing an error code, the technician you call should know the model line. Below are independent repair companies serving Unionville, with those that mention Kenmore first, then the nearest dryer repair companies.
This is an independent directory. We are not affiliated with Kenmore, and the technicians listed are independent repair companies, not the manufacturer.
Kenmore dryers were made for Sears by several manufacturers over the years, so the model number matters more than the badge. Independent technicians can look up the parts from it.
Independent Kenmore Dryer Technicians, Unionville NC
We found 40 appliance repair companies within 30 miles of Unionville. Other nearby bases include Monroe (16), Matthews (12), and Indian Trail (6). Distances run up to about 14 miles. No company within 30 miles of Unionville names Kenmore in its listing, so the list adds matches from farther out and the closest appliance repair companies. The closest is FixUp Appliance Llc, about 4.2 miles away. Across 33 rated companies, the average public rating is 4.8 stars.
Companies are shown by relevance and distance from Unionville. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Three nearest companies, miles away | 4.2, 4.4, 4.6 |
|---|---|
| Companies within 30 miles | 60 |
| With 4.5+ stars and at least 10 reviews | 32 |
| Open on Saturdays (per listing) | 43 |
| Mention Kenmore | 0 |
| Show laundry appliance work | 17 |
At the top of the Unionville list: Sears Appliance Repair (58.8 miles away, based in Lugoff, 4.3 stars from 46 reviews, lists Saturday hours); Urgent Appliance Repair (9.6 miles away, based in Monroe, 5.0 stars from 159 reviews, lists Saturday hours); Prime Appliance Repair (6.7 miles away, based in Indian Trail, 5.0 stars from 70 reviews, lists Saturday hours); Almaks Appliance Repair in Charlotte (12.6 miles away, based in Matthews, 4.9 stars from 67 reviews).
Kenmore Dryer Lines and Features
What Makes Kenmore Dryer Repairs Different
On Kenmore Elite steam dryers, the display reports ductwork restriction in steps (d80, d90, d95) and a blinking CHECK VENT, which the guide says is an exhaust problem rather than a dryer failure. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Common Kenmore Dryer Problems
- Dryer takes too long to dry. Kenmore says to clean the lint filter of lint and softener residue and check the exhaust duct for buildup or excess length. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Check Vent light blinking. Kenmore says the exhaust is seriously restricted and the ducts should be cleaned and inspected before using the dryer again. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Reading a Kenmore Dryer Error Code
| Code | What it means |
|---|---|
| HS (Elite steam dryers) | The humidity (moisture) sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| CHECK FILTER (Elite steam dryers) | A reminder to clean the lint filter before the load. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| PF / nP (Elite steam dryers) | A power supply or cord connection problem; check the cord at the terminal block and the house fuse or breaker. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore Dryer Problems Worth a Service Call
- Cycles take two or three runs to finish
- Drum will not turn even though you hear a hum
- Burning or hot smell during a cycle
Inside a Dryer Repair Visit
Care Kenmore Recommends for Its Dryers
- Use only 4-inch rigid or semi-rigid metal duct (no plastic or foil), check it for lint monthly and clean it at least yearly; one Elite steam model allows about 65 feet with no elbows and 28 feet with four 90-degree elbows using a 4-inch hood. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
What Kenmore Dryer Repairs Cost
Most Kenmore dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Typical dryer repair: $100–$200 Source: Fixr - How much does it cost to repair a dryer?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- Whether the dryer is gas or electric
- The brand, model and serial number from the label inside the door or on the back panel
- What happens when you press Start (no response, hum, runs with no heat, stops early)
Local Notes for Unionville
Most dryer calls in Unionville come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
North Carolina has no license specific to appliance repair; work on gas appliances, fuel piping and heating equipment is regulated by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors, with an exemption for minor repairs that don't change fuel type, venting or piping. Source: N.C. Gen. Stat. § 87-21 (NC General Assembly)
Gas and fuel piping installation requires a plumbing or heating license, or a restricted fuel piping license, issued by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors. Source: N.C. Gen. Stat. § 87-21 (NC General Assembly)
Hiring a Dryer Repair Company in Unionville
- If a part has to be ordered, how soon can you come back to finish?
- Do you work on gas dryers, and who handles anything involving the gas line?
- What guarantee do you give on parts and labor?
Kenmore Dryer Repair FAQs: Unionville, NC
Which Unionville technicians work on Kenmore?
Is this Kenmore customer service?
What makes a dryer stop heating?
More Laundry Repair in Unionville, NC
More Kenmore Dryer Repair Pages Nearby
Before you call, find the model and serial number on your Kenmore dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.