Kenmore owners in Pinardville usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving Pinardville, with those that mention Kenmore first, then the nearest dryer repair companies.
Washer and Dryer Repair is independent and not affiliated with Kenmore. Listed companies are independent technicians who repair Kenmore dryers and other brands.
If you bought your Kenmore at Sears, you do not need to go back to Sears for a repair. Independent technicians near Pinardville work on Kenmore dryers every week.
Who Works on Kenmore Dryers Near Pinardville
Within 30 miles of Pinardville there are 40 appliance repair companies in our data. The rest are spread across Manchester (9), Nashua (6), and Concord (4). The farthest listed company is about 27 miles out. MrCheck is the nearest, roughly 1.1 miles from Pinardville. No company within 30 miles of Pinardville names Kenmore in its listing, so the list adds matches from farther out and the closest appliance repair companies. Rated companies nearby average 4.4 stars across 38 businesses.
Companies are shown by relevance and distance from Pinardville. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Mention Kenmore | 0 |
|---|---|
| Three nearest companies, miles away | 1.1, 2.2, 2.8 |
| List dryer or washer & dryer work | 18 |
| With 4.5+ stars and at least 10 reviews | 29 |
| Open on Saturdays (per listing) | 33 |
| Companies within 30 miles | 55 |
Closest matches for Pinardville: Sears Appliance Repair (33.3 miles away, based in Newburyport, 4.6 stars from 321 reviews, lists Saturday hours); Baron's Major Brands Appliances- Manchester (5.0 miles away, based in Manchester, 4.8 stars from 1,233 reviews, lists Saturday hours); Sears Appliance Repair (5.3 miles away, based in Manchester, 4.6 stars from 244 reviews, lists Saturday hours); Baron's Major Brands Appliances- Concord (15.9 miles away, based in Concord, 4.8 stars from 1,619 reviews, lists Saturday hours).
Kenmore Dryer Features Technicians Work On
How Kenmore Dryers Are Built
Kenmore's compact condensing dryer needs no outside wall vent, runs on a 220V supply and offers manual-drain or direct-drain water removal. Source: Kenmore - 4.0 cu. ft. Front-Load Electric Condensing Dryer
SmartDry Ultra dryers combine two moisture sensors with a temperature monitor and a dual heating element to fine-tune heat and cycle length. Source: Kenmore - 8.8 cu. ft. Electric Dryer w/ SmartDry Ultra Technology
Common Kenmore Dryer Problems
- Dryer takes too long to dry. Kenmore says to clean the lint filter of lint and softener residue and check the exhaust duct for buildup or excess length. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer vibrating or noisy. Kenmore says to level the dryer on its four feet without extending them more than needed and keep at least an inch of clearance at the sides and back. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Kenmore Dryer Error Codes
| Code | What it means |
|---|---|
| HS (Elite steam dryers) | The humidity (moisture) sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| CL (Elite steam dryers) | Control Lock is on. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| tE1-tE7 (Elite steam dryers) | A temperature sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore Dryer Problems Worth a Service Call
- Drum turns but the air stays cool
- Dryer shuts off a few minutes into the cycle
- Outside of the cabinet gets unusually hot
What a Dryer Repair Technician Checks
Owner Care for Kenmore Dryers
- Use only 4-inch rigid or semi-rigid metal duct (no plastic or foil), check it for lint monthly and clean it at least yearly; one Elite steam model allows about 65 feet with no elbows and 28 feet with four 90-degree elbows using a 4-inch hood. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Kenmore Dryer Repair Cost Ranges
A Kenmore dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- Whether the dryer is gas or electric
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- The brand, model and serial number from the label inside the door or on the back panel
Local Notes for Pinardville
Most dryer calls in Pinardville come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
New Hampshire has no license for appliance repair as such; fuel gas work, including gas appliance installation and service, is licensed by the Mechanical Safety and Licensing Board, whose licenses are limited to their named specialty. Source: N.H. RSA 153:29 (NH General Court)
Fuel gas fitters are licensed by the state Mechanical Safety and Licensing Board, with specialty licenses that include fuel gas installation technician, service technician and piping installer. Source: N.H. RSA 153:29 (NH General Court)
Before You Book in Pinardville
- Can you look at the washer on the same visit if it is acting up too?
- If a part has to be ordered, how soon can you come back to finish?
- Do you work on gas dryers, and who handles anything involving the gas line?
Kenmore Dryer Repair FAQs: Pinardville, NH
Do you work for Kenmore?
How do I find a technician who knows Kenmore dryers?
Is my Kenmore dryer worth repairing?
Why does my dryer take so long to dry?
Related Repair Pages for Pinardville
Kenmore Dryer Repair Near Pinardville
Before you call, find the model and serial number on your Kenmore dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.