If your Kenmore dryer has stopped heating, stopped tumbling or started throwing an error code, the technician you call should know the model line. The Albuquerque list starts with companies that name Kenmore, followed by other appliance repair companies that list dryer work.
This is an independent directory. We are not affiliated with Kenmore, and the technicians listed are independent repair companies, not the manufacturer.
If you bought your Kenmore at Sears, you do not need to go back to Sears for a repair. Independent technicians near Albuquerque work on Kenmore dryers every week.
Who Works on Kenmore Dryers Near Albuquerque
21 repair companies serve Albuquerque from within 30 miles. 14 list an address in Albuquerque, and the rest are spread across Edgewood (2), Rio Rancho (1), and Bernalillo (1). Distances run up to about 28 miles. None of the repair companies near Albuquerque name Kenmore in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. The closest is Dalton Service Center, about 0.4 miles away. Across 18 rated companies, the average public rating is 4.5 stars.
Companies are shown by relevance and distance from Albuquerque. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Appliance repair companies in range (30 mi) | 21 |
|---|---|
| Open on Saturdays (per listing) | 15 |
| Show laundry appliance work | 9 |
| Distance to the three closest (mi) | 0.4, 1.5, 1.9 |
| Mention Kenmore | 0 |
| Rated 4.5 stars or higher (10+ reviews) | 10 |
The leading options for Albuquerque are Sarah's Appliance Repair LLC (1.5 miles away, 4.9 stars from 566 reviews, lists Saturday hours); Mr. Ed's Appliance Repair (7.7 miles away, 4.8 stars from 136 reviews); Albuquerque Home Pros (3.0 miles away, 4.7 stars from 48 reviews, lists Saturday hours); ASAP Appliance Repair (7.2 miles away, 4.9 stars from 657 reviews, lists Saturday hours).
Know Your Kenmore Dryer
What Makes Kenmore Dryer Repairs Different
Kenmore's compact condensing dryer needs no outside wall vent, runs on a 220V supply and offers manual-drain or direct-drain water removal. Source: Kenmore - 4.0 cu. ft. Front-Load Electric Condensing Dryer
What Kenmore Says to Check First
- Dryer not heating. Kenmore says to check for a tripped breaker or blown fuse and, on gas models, confirm the gas supply is on, noting an electric dryer can tumble without heat on a partial circuit. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Clothes wrinkled after drying. Kenmore says to remove clothes promptly, avoid overloading, and use Wrinkle Guard or a short touch-up cycle. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Dryer Codes Mean
| Code | What it means |
|---|---|
| d80 / d90 / d95 (Elite steam dryers) | The exhaust ductwork is roughly 80, 90 or 95 percent blocked; stop using the dryer until the vent is cleaned or repaired. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| PS (Elite steam dryers) | The power cord on an electric model is wired incorrectly; check the neutral on the center terminal. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| gAS (Elite steam dryers) | The gas supply is off on a gas model; open the house and dryer gas shutoffs. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore smart washers and dryers can check diagnostics through the Kenmore Smart app or Alexa and send app notices about blocked filters and other machine issues. Source: Kenmore - Kenmore Elite 81782 Smart 7.4 cu. ft. Electric Dryer with Accela Steam
Kenmore Dryer Problems Worth a Service Call
- Drum will not turn even though you hear a hum
- Squealing, thumping or grinding while it runs
- Cycles take two or three runs to finish
What a Dryer Repair Technician Checks
Care Kenmore Recommends for Its Dryers
- Use only 4-inch rigid or semi-rigid metal duct (no plastic or foil), check it for lint monthly and clean it at least yearly; one Elite steam model allows about 65 feet with no elbows and 28 feet with four 90-degree elbows using a 4-inch hood. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
What Kenmore Dryer Repairs Cost
Price the repair before replacing a Kenmore dryer. Published ranges for common jobs:
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a Kenmore Dryer Call
- How long the vent run is and where it exits the house
- Any error code on the display
- Whether the dryer is gas or electric
Around Albuquerque
Most dryer calls in Albuquerque come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
New Mexico has no appliance-repair-only license; installing, repairing and servicing natural gas piping and listed gas appliances falls under the Construction Industries Division's MM-2 natural gas fitting classification. Source: CID License Classifications and Scopes (City of Albuquerque)
Natural gas piping and gas appliance work needs a Construction Industries Division MM-2 (natural gas fitting) or MM-98 (mechanical) license, with journeyman gas fitter certification for workers; the plumbing-only MM-1 class excludes gas appliances and gas piping, and LP gas systems fall under a separate LP gas classification. Source: CID License Classifications and Scopes (City of Albuquerque)
Hiring a Dryer Repair Company in Albuquerque
- What guarantee do you give on parts and labor?
- Can you give a written estimate before ordering parts?
- Is your company licensed where my state requires it, and insured?
Kenmore Dryer Repair FAQs: Albuquerque, NM
Is this Kenmore customer service?
Should I repair or replace my Kenmore dryer?
How do I find a technician who knows Kenmore dryers?
Other Dryer Repair in Albuquerque
Kenmore Dryer Repair Near Albuquerque
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a Kenmore repair.