If your Kenmore dryer has stopped heating, stopped tumbling or started throwing an error code, the technician you call should know the model line. The Mount Sinai list starts with companies that name Kenmore, followed by other appliance repair companies that list dryer work.
Washer and Dryer Repair is independent and not affiliated with Kenmore. Listed companies are independent technicians who repair Kenmore dryers and other brands.
If you bought your Kenmore at Sears, you do not need to go back to Sears for a repair. Independent technicians near Mount Sinai work on Kenmore dryers every week.
Who Works on Kenmore Dryers Near Mount Sinai
Within 30 miles of Mount Sinai there are 40 appliance repair companies in our data. The rest are spread across Holbrook (4), Stony Brook (3), and Holtsville (3). The farthest listed company is about 12 miles out. East End Appliance is the nearest, roughly 0.9 miles from Mount Sinai. No company within 90 miles of Mount Sinai mentions Kenmore by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 28 rated companies in range average 4.3 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Three nearest companies, miles away | 0.9, 1.5, 2.1 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 17 |
| Appliance repair companies in range (30 mi) | 60 |
| Mention Kenmore | 0 |
| Listing Saturday hours | 42 |
| List dryer or washer & dryer work | 6 |
The leading options for Mount Sinai are JIC Appliance Care LLC (11.4 miles away, based in Holbrook, 5.0 stars from 377 reviews, lists Saturday hours); Island Wide Appliance (12.0 miles away, based in Patchogue, 4.5 stars from 322 reviews); LJ Appliance Repair Service (6.6 miles away, based in Ridge, 4.6 stars from 22 reviews, lists Saturday hours); All in Repairs (2.1 miles away, based in Port Jefferson Station, 4.9 stars from 63 reviews).
Know Your Kenmore Dryer
How Kenmore Dryers Are Built
On Kenmore Elite steam dryers, the display reports ductwork restriction in steps (d80, d90, d95) and a blinking CHECK VENT, which the guide says is an exhaust problem rather than a dryer failure. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Kenmore's compact condensing dryer needs no outside wall vent, runs on a 220V supply and offers manual-drain or direct-drain water removal. Source: Kenmore - 4.0 cu. ft. Front-Load Electric Condensing Dryer
Common Kenmore Dryer Problems
- Clothes wrinkled after drying. Kenmore says to remove clothes promptly, avoid overloading, and use Wrinkle Guard or a short touch-up cycle. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Check Vent light blinking. Kenmore says the exhaust is seriously restricted and the ducts should be cleaned and inspected before using the dryer again. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Reading a Kenmore Dryer Error Code
| Code | What it means |
|---|---|
| gAS (Elite steam dryers) | The gas supply is off on a gas model; open the house and dryer gas shutoffs. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| CL (Elite steam dryers) | Control Lock is on. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| PS (Elite steam dryers) | The power cord on an electric model is wired incorrectly; check the neutral on the center terminal. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore smart washers and dryers can check diagnostics through the Kenmore Smart app or Alexa and send app notices about blocked filters and other machine issues. Source: Kenmore - Kenmore Elite 81782 Smart 7.4 cu. ft. Electric Dryer with Accela Steam
Kenmore Dryer Problems Worth a Service Call
- Clothes still damp after a full cycle
- Squealing, thumping or grinding while it runs
- Outside of the cabinet gets unusually hot
What a Dryer Repair Technician Checks
Keeping a Kenmore Dryer Running
- Use only 4-inch rigid or semi-rigid metal duct (no plastic or foil), check it for lint monthly and clean it at least yearly; one Elite steam model allows about 65 feet with no elbows and 28 feet with four 90-degree elbows using a 4-inch hood. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
What Kenmore Dryer Repairs Cost
A Kenmore dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- The brand, model and serial number from the label inside the door or on the back panel
- Whether the dryer is gas or electric
- What happens when you press Start (no response, hum, runs with no heat, stops early)
Around Mount Sinai
Most dryer calls in Mount Sinai come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
New York State has no appliance repair license; home improvement contractor licensing is set locally, required in New York City and in Nassau, Suffolk, Westchester, Putnam and Rockland counties. Source: NY Attorney General: Contractor tip card
Gas work licensing is set locally; in New York City, for example, the Department of Buildings requires gas work to be done by a Licensed Master Plumber or by Gas Work Qualification holders under a master plumber's supervision. Source: NYC Department of Buildings: Local Law 150 of 2016 Gas Work Qualification Requirement
Before You Book in Mount Sinai
- Is your company licensed where my state requires it, and insured?
- Will you check the vent and lint path as part of the visit?
- Can you look at the washer on the same visit if it is acting up too?
Kenmore Dryer Repair FAQs: Mount Sinai, NY
Is this Kenmore customer service?
Why do my clothes come out damp?
Which Mount Sinai technicians work on Kenmore?
Why does my Kenmore dryer show an error code?
More Laundry Repair in Mount Sinai, NY
More Kenmore Dryer Repair Pages Nearby
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a Kenmore repair.