Most Kenmore dryer repairs in Suffern involve the same few systems: heat, airflow, the drum drive and the controls. The Suffern list starts with companies that name Kenmore, followed by other appliance repair companies that list dryer work.
This is an independent directory. We are not affiliated with Kenmore, and the technicians listed are independent repair companies, not the manufacturer.
Kenmore dryers were made for Sears by several manufacturers over the years, so the model number matters more than the badge. Independent technicians can look up the parts from it.
Independent Kenmore Dryer Technicians, Suffern NY
Our data shows 40 appliance repair companies inside a 30-mile radius of Suffern. Other nearby bases include Spring Valley (4), Ridgewood (3), and Montvale (2). Distances run up to about 12 miles. No company within 90 miles of Suffern mentions Kenmore by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Nearest on the list: All American Appliance Service, around 1.4 miles out. The 34 rated companies in range average 4.9 stars.
Companies are shown by relevance and distance from Suffern. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Appliance repair companies in range (30 mi) | 60 |
|---|---|
| Show laundry appliance work | 6 |
| Mention Kenmore | 0 |
| Rated 4.5 stars or higher (10+ reviews) | 8 |
| Distance to the three closest (mi) | 1.4, 3.8, 4.8 |
| Open on Saturdays (per listing) | 36 |
First up for Suffern: Mr. Appliance of Bergen County (9.3 miles away, based in Ridgewood, 4.6 stars from 317 reviews, lists Saturday hours); Sears Appliance Repair (11.6 miles away, based in Paramus, 4.4 stars from 266 reviews, lists Saturday hours); United Technical Services (11.0 miles away, based in Emerson, 4.9 stars from 161 reviews); Appliance Repair Medic (4.8 miles away, based in Spring Valley, 4.6 stars from 251 reviews).
Know Your Kenmore Dryer
What Makes Kenmore Dryer Repairs Different
Accela Steam dryers connect directly to the household water supply, so the inlet hose and water pressure (20 to 120 psi) become part of a steam-dryer service check. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Common Kenmore Dryer Problems
- Dryer vibrating or noisy. Kenmore says to level the dryer on its four feet without extending them more than needed and keep at least an inch of clearance at the sides and back. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Clothes wrinkled after drying. Kenmore says to remove clothes promptly, avoid overloading, and use Wrinkle Guard or a short touch-up cycle. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Dryer Codes Mean
| Code | What it means |
|---|---|
| tE1-tE7 (Elite steam dryers) | A temperature sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| HS (Elite steam dryers) | The humidity (moisture) sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| CL (Elite steam dryers) | Control Lock is on. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore smart washers and dryers can check diagnostics through the Kenmore Smart app or Alexa and send app notices about blocked filters and other machine issues. Source: Kenmore - Kenmore Elite 81782 Smart 7.4 cu. ft. Electric Dryer with Accela Steam
When to Call for Kenmore Dryer Repair
- Cycles take two or three runs to finish
- Squealing, thumping or grinding while it runs
- Dryer shuts off a few minutes into the cycle
What a Dryer Repair Technician Checks
Care Kenmore Recommends for Its Dryers
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
- Use only 4-inch rigid or semi-rigid metal duct (no plastic or foil), check it for lint monthly and clean it at least yearly; one Elite steam model allows about 65 feet with no elbows and 28 feet with four 90-degree elbows using a 4-inch hood. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Budgeting for a Kenmore Dryer Repair
Most Kenmore dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- Any error code on the display
- How long the vent run is and where it exits the house
- The brand, model and serial number from the label inside the door or on the back panel
Dryer Notes for Suffern, NY
Most dryer calls in Suffern come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
New York State has no appliance repair license; home improvement contractor licensing is set locally, required in New York City and in Nassau, Suffolk, Westchester, Putnam and Rockland counties. Source: NY Attorney General: Contractor tip card
Gas work licensing is set locally; in New York City, for example, the Department of Buildings requires gas work to be done by a Licensed Master Plumber or by Gas Work Qualification holders under a master plumber's supervision. Source: NYC Department of Buildings: Local Law 150 of 2016 Gas Work Qualification Requirement
Hiring a Dryer Repair Company in Suffern
- Do you work on gas dryers, and who handles anything involving the gas line?
- Is your company licensed where my state requires it, and insured?
- What is the service call or diagnostic fee, and is it applied to the repair?
Kenmore Dryer Repair FAQs: Suffern, NY
How do I find a technician who knows Kenmore dryers?
Should I repair or replace my Kenmore dryer?
What should I do about a Kenmore error code?
Related Repair Pages for Suffern
Kenmore Dryer Repair in Nearby Cities
Before you call, find the model and serial number on your Kenmore dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.