Kenmore owners in Clinton usually want two things from a repair company: experience with the brand and quick access to parts. The Clinton list starts with companies that name Kenmore, followed by other appliance repair companies that list dryer work.
Washer and Dryer Repair is independent and not affiliated with Kenmore. Listed companies are independent technicians who repair Kenmore dryers and other brands.
Kenmore appliances were sold through Sears for decades, so many owners look for Sears dryer repair. The companies here are independent technicians who work on Kenmore and Kenmore Elite dryers; they are not Sears.
Kenmore Dryer Repair Near Clinton
We found 7 appliance repair companies within 68 miles of Clinton. 1 of them are based in Clinton itself, and the rest are spread across Weatherford (1), Elk City (1), and Okarche (1). Distances run up to about 67 miles. 1 of them mentions Kenmore in their listing or website. Sears Appliance Repair is the nearest, roughly 1.1 miles from Clinton. Rated companies nearby average 4.1 stars across 7 businesses. Clinton is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Companies are shown by relevance and distance from Clinton. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Appliance repair companies in range (68 mi) | 7 |
|---|---|
| Three nearest companies, miles away | 1.1, 17.1, 27.1 |
| Mention Kenmore | 1 |
| Open on Saturdays (per listing) | 6 |
| Rated 4.5 stars or higher (10+ reviews) | 3 |
| Show laundry appliance work | 5 |
At the top of the Clinton list: Sears Appliance Repair (61.5 miles away, based in Altus, 3.6 stars from 30 reviews, lists Saturday hours); Sears Appliance Repair (1.1 miles away, 4.5 stars from 14 reviews, lists Saturday hours); Wisdom Refrigeration, Heating & Cooling (17.1 miles away, based in Weatherford, 5.0 stars from 281 reviews, lists Saturday hours); Sears Appliance Repair (27.1 miles away, based in Elk City, 4.3 stars from 6 reviews, lists Saturday hours).
Kenmore Dryer Lines and Features
How Kenmore Dryers Are Built
SmartDry Ultra dryers combine two moisture sensors with a temperature monitor and a dual heating element to fine-tune heat and cycle length. Source: Kenmore - 8.8 cu. ft. Electric Dryer w/ SmartDry Ultra Technology
Common Kenmore Dryer Problems
- Dryer won't start. Kenmore says to confirm the cord is fully plugged into a grounded outlet and the breaker is intact, and to turn off Control Lock if buttons beep but nothing happens. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer vibrating or noisy. Kenmore says to level the dryer on its four feet without extending them more than needed and keep at least an inch of clearance at the sides and back. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Dryer Codes Mean
| Code | What it means |
|---|---|
| d80 / d90 / d95 (Elite steam dryers) | The exhaust ductwork is roughly 80, 90 or 95 percent blocked; stop using the dryer until the vent is cleaned or repaired. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| CL (Elite steam dryers) | Control Lock is on. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| PF / nP (Elite steam dryers) | A power supply or cord connection problem; check the cord at the terminal block and the house fuse or breaker. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore smart washers and dryers can check diagnostics through the Kenmore Smart app or Alexa and send app notices about blocked filters and other machine issues. Source: Kenmore - Kenmore Elite 81782 Smart 7.4 cu. ft. Electric Dryer with Accela Steam
When to Call for Kenmore Dryer Repair
- Dryer shuts off a few minutes into the cycle
- Squealing, thumping or grinding while it runs
- Clothes still damp after a full cycle
What Gets Fixed on a Clinton Dryer Call
Owner Care for Kenmore Dryers
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
- If the lint screen looks clogged when held to the light, scrub it with hot soapy water and a stiff brush and let it dry fully before reinstalling. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Kenmore Dryer Repair Cost Ranges
A Kenmore dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- The brand, model and serial number from the label inside the door or on the back panel
- Any error code on the display
Local Notes for Clinton
Most dryer calls in Clinton come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Oklahoma has no general appliance repair license; mechanical licensing through the Construction Industries Board excludes minor repairs the manufacturer allows an owner or agent to make, but that exclusion does not reach gas piping, gas controls, appliance venting or opening a sealed refrigeration system. Source: OAC 158:50 Mechanical Industry Rules (Oklahoma Construction Industries Board)
Natural gas piping work requires a Natural Gas Piping mechanical license or a plumbing license issued by the Oklahoma Construction Industries Board. Source: OAC 158:50 Mechanical Industry Rules (Oklahoma Construction Industries Board)
Before You Book in Clinton
- Is your company licensed where my state requires it, and insured?
- What is the service call or diagnostic fee, and is it applied to the repair?
- What guarantee do you give on parts and labor?
Kenmore Dryer Repair FAQs: Clinton, OK
Why do my clothes come out damp?
Why is my dryer running but not heating?
Do you work for Kenmore?
More Laundry Repair in Clinton, OK
Kenmore Dryer Repair Near Clinton
Write down any error code your Kenmore dryer shows and when it appears. It helps a Clinton technician bring the right parts.