Kenmore owners in Gantt usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving Gantt, with those that mention Kenmore first, then the nearest dryer repair companies.
This is an independent directory. We are not affiliated with Kenmore, and the technicians listed are independent repair companies, not the manufacturer.
Kenmore dryers were made for Sears by several manufacturers over the years, so the model number matters more than the badge. Independent technicians can look up the parts from it.
Who Works on Kenmore Dryers Near Gantt
Our data shows 34 appliance repair companies inside a 30-mile radius of Gantt. The rest are spread across Greenville (11), Anderson (4), and Spartanburg (3). The closest is Sears Appliance Repair, about 2.7 miles away. None of the repair companies near Gantt name Kenmore in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. Across 34 rated companies, the average public rating is 4.2 stars.
Companies are shown by relevance and distance from Gantt. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Show laundry appliance work | 14 |
|---|---|
| Appliance repair companies in range (30 mi) | 34 |
| Rated 4.5 stars or higher (10+ reviews) | 15 |
| Three nearest companies, miles away | 2.7, 3.7, 4.2 |
| Open on Saturdays (per listing) | 20 |
| Mention Kenmore | 0 |
The leading options for Gantt are Appliance GrandMasters (4.4 miles away, based in Greenville, 4.7 stars from 1,162 reviews, lists Saturday hours); The Olde Homestead, Inc. (6.1 miles away, based in Greenville, 4.9 stars from 1,104 reviews); Mr. Appliance of Greater Greenville (7.0 miles away, based in Greenville, 4.8 stars from 1,221 reviews); Sears Appliance Repair (2.7 miles away, based in Greenville, 4.4 stars from 72 reviews, lists Saturday hours).
Know Your Kenmore Dryer
What Makes Kenmore Dryer Repairs Different
SmartDry Ultra dryers combine two moisture sensors with a temperature monitor and a dual heating element to fine-tune heat and cycle length. Source: Kenmore - 8.8 cu. ft. Electric Dryer w/ SmartDry Ultra Technology
Kenmore Dryer Symptoms and First Checks
- Dryer vibrating or noisy. Kenmore says to level the dryer on its four feet without extending them more than needed and keep at least an inch of clearance at the sides and back. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Check Vent light blinking. Kenmore says the exhaust is seriously restricted and the ducts should be cleaned and inspected before using the dryer again. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Dryer Codes Mean
| Code | What it means |
|---|---|
| PS (Elite steam dryers) | The power cord on an electric model is wired incorrectly; check the neutral on the center terminal. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| d80 / d90 / d95 (Elite steam dryers) | The exhaust ductwork is roughly 80, 90 or 95 percent blocked; stop using the dryer until the vent is cleaned or repaired. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| gAS (Elite steam dryers) | The gas supply is off on a gas model; open the house and dryer gas shutoffs. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore smart washers and dryers can check diagnostics through the Kenmore Smart app or Alexa and send app notices about blocked filters and other machine issues. Source: Kenmore - Kenmore Elite 81782 Smart 7.4 cu. ft. Electric Dryer with Accela Steam
Signs Your Kenmore Dryer Needs a Technician
- Dryer will not start when you press Start
- Drum turns but the air stays cool
- Cycles take two or three runs to finish
What a Dryer Repair Technician Checks
Owner Care for Kenmore Dryers
- If the lint screen looks clogged when held to the light, scrub it with hot soapy water and a stiff brush and let it dry fully before reinstalling. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
What Kenmore Dryer Repairs Cost
A Kenmore dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- How long the vent run is and where it exits the house
- Any error code on the display
Around Gantt
Most dryer calls in Gantt come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
South Carolina does not issue a license specific to appliance repair; mechanical work such as plumbing, heating, air conditioning and refrigeration is licensed by the Contractor's Licensing Board for commercial-scale jobs and by the Residential Builders Commission for residential HVAC and plumbing. Source: S.C. Code Title 40, Chapter 11 (Contractors), South Carolina Legislature
South Carolina has no standalone gas piping license; gas lines serving gas-fired equipment are installed under mechanical classifications such as Plumbing, Heating and Packaged Equipment issued through the Department of Labor, Licensing and Regulation. Source: S.C. Code Title 40, Chapter 11 (Contractors), South Carolina Legislature
How to Choose a Dryer Technician Near Gantt
- Will you check the vent and lint path as part of the visit?
- If a part has to be ordered, how soon can you come back to finish?
- Is your company licensed where my state requires it, and insured?
Kenmore Dryer Repair FAQs: Gantt, SC
Should I repair or replace my Kenmore dryer?
What makes a dryer stop heating?
Do you work for Kenmore?
Related Repair Pages for Gantt
Kenmore Dryer Repair in Nearby Cities
Before you call, find the model and serial number on your Kenmore dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.