A Kenmore dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. We flag companies whose listing or website mentions Kenmore and fill in with nearby dryer repair companies so you always have options.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by Kenmore. If your dryer is still under manufacturer coverage, contact Kenmore directly.
Kenmore dryers were made for Sears by several manufacturers over the years, so the model number matters more than the badge. Independent technicians can look up the parts from it.
Independent Kenmore Dryer Technicians, Kingston TN
Our data shows 20 appliance repair companies inside a 30-mile radius of Kingston. The rest are spread across Knoxville (7), Harriman (3), and Lenoir City (3). Distances run up to about 30 miles. No company within 90 miles of Kingston mentions Kenmore by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is Murray's Major Appliance Services, about 3.1 miles away. The 20 rated companies in range average 4.5 stars.
Companies are shown by relevance and distance from Kingston. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Distance to the three closest (mi) | 3.1, 3.1, 5.2 |
|---|---|
| Companies within 30 miles | 20 |
| Listing Saturday hours | 11 |
| Mention Kenmore | 0 |
| With 4.5+ stars and at least 10 reviews | 10 |
| Show laundry appliance work | 8 |
The leading options for Kingston are Sears Appliance Repair (5.2 miles away, based in Harriman, 4.3 stars from 113 reviews, lists Saturday hours); Mr. Appliance of Knoxville (23.7 miles away, based in Knoxville, 4.6 stars from 1,973 reviews); Eleet Appliance Repair (9.1 miles away, based in Lenoir City, 4.8 stars from 45 reviews, lists Saturday hours); Pattersons Home Appliances (3.1 miles away, based in Harriman, 4.5 stars from 121 reviews, lists Saturday hours).
Kenmore Dryer Features Technicians Work On
What Makes Kenmore Dryer Repairs Different
Kenmore's compact condensing dryer needs no outside wall vent, runs on a 220V supply and offers manual-drain or direct-drain water removal. Source: Kenmore - 4.0 cu. ft. Front-Load Electric Condensing Dryer
On Kenmore Elite steam dryers, the display reports ductwork restriction in steps (d80, d90, d95) and a blinking CHECK VENT, which the guide says is an exhaust problem rather than a dryer failure. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Says to Check First
- Dryer vibrating or noisy. Kenmore says to level the dryer on its four feet without extending them more than needed and keep at least an inch of clearance at the sides and back. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Check Vent light blinking. Kenmore says the exhaust is seriously restricted and the ducts should be cleaned and inspected before using the dryer again. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Reading a Kenmore Dryer Error Code
| Code | What it means |
|---|---|
| HS (Elite steam dryers) | The humidity (moisture) sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| PS (Elite steam dryers) | The power cord on an electric model is wired incorrectly; check the neutral on the center terminal. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| CL (Elite steam dryers) | Control Lock is on. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Signs Your Kenmore Dryer Needs a Technician
- Dryer shuts off a few minutes into the cycle
- Drum will not turn even though you hear a hum
- Clothes still damp after a full cycle
What Gets Fixed on a Kingston Dryer Call
Owner Care for Kenmore Dryers
- Use only 4-inch rigid or semi-rigid metal duct (no plastic or foil), check it for lint monthly and clean it at least yearly; one Elite steam model allows about 65 feet with no elbows and 28 feet with four 90-degree elbows using a 4-inch hood. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Kenmore Dryer Repair Cost Ranges
Most Kenmore dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- How long the vent run is and where it exits the house
- Whether the dryer is gas or electric
- What happens when you press Start (no response, hum, runs with no heat, stops early)
Dryer Notes for Kingston, TN
Most dryer calls in Kingston come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Tennessee's Board for Licensing Contractors does not list an appliance repair license among the licenses it issues (general contractor, home improvement, limited licensed electrician and limited licensed plumber). Source: TN Board for Licensing Contractors
Gas piping and gas appliance installation permits are handled by local governments, some of which require their own gas fitter license; for example, Chattanooga requires a city Master Gas Fitter License to pull a gas permit. Source: City of Chattanooga: Gas Permit
How to Choose a Dryer Technician Near Kingston
- Is your company licensed where my state requires it, and insured?
- Can you give a written estimate before ordering parts?
- Can you look at the washer on the same visit if it is acting up too?
Kenmore Dryer Repair FAQs: Kingston, TN
What should I do about a Kenmore error code?
Which Kingston technicians work on Kenmore?
Why does my dryer take so long to dry?
Other Dryer Repair in Kingston
Kenmore Dryer Repair Near Kingston
Before you call, find the model and serial number on your Kenmore dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.