Kenmore Dryer Repair in Clarksville, TN

If your Kenmore dryer has stopped heating, stopped tumbling or started throwing an error code, the technician you call should know the model line. Below are independent repair companies serving Clarksville, with those that mention Kenmore first, then the nearest dryer repair companies.

This is an independent directory. We are not affiliated with Kenmore, and the technicians listed are independent repair companies, not the manufacturer.

Kenmore dryers were made for Sears by several manufacturers over the years, so the model number matters more than the badge. Independent technicians can look up the parts from it.

Who Works on Kenmore Dryers Near Clarksville

Our data shows 17 appliance repair companies inside a 30-mile radius of Clarksville. 9 list an address in Clarksville, and other nearby bases include Springfield (4), Hopkinsville (2), and Ashland City (1). Distances run up to about 27 miles. No company within 30 miles of Clarksville names Kenmore in its listing, so the list adds matches from farther out and the closest appliance repair companies. Nearest on the list: Barnes Repair Company, around 2.6 miles out. Rated companies nearby average 4.6 stars across 16 businesses.

Companies are shown by relevance and distance from Clarksville. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.

Closest matches for Clarksville: Sears Appliance Repair (52.7 miles away, based in Madisonville, 4.4 stars from 67 reviews, lists Saturday hours); Mr. Appliance of Clarksville (4.5 miles away, 4.8 stars from 770 reviews, lists Saturday hours); Barnes Repair Company (2.6 miles away, 5.0 stars from 289 reviews); Sears Appliance Repair (3.2 miles away, 4.5 stars from 144 reviews, lists Saturday hours).

Kenmore Dryer Lines and Features

What a Kenmore Dryer Technician Deals With

Accela Steam dryers connect directly to the household water supply, so the inlet hose and water pressure (20 to 120 psi) become part of a steam-dryer service check. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)

Kenmore's Check Vent sensor alerts the owner when the dryer is not moving enough air to the outside. Source: Kenmore - Laundry List: Kenmore Dryer Buying Guide

Kenmore Dryer Symptoms and First Checks

• Dryer vibrating or noisy. Kenmore says to level the dryer on its four feet without extending them more than needed and keep at least an inch of clearance at the sides and back. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
• Dryer not heating. Kenmore says to check for a tripped breaker or blown fuse and, on gas models, confirm the gas supply is on, noting an electric dryer can tumble without heat on a partial circuit. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)

Reading a Kenmore Dryer Error Code

Kenmore smart washers and dryers can check diagnostics through the Kenmore Smart app or Alexa and send app notices about blocked filters and other machine issues. Source: Kenmore - Kenmore Elite 81782 Smart 7.4 cu. ft. Electric Dryer with Accela Steam

Signs Your Kenmore Dryer Needs a Technician

• Drum will not turn even though you hear a hum
• Dryer shuts off a few minutes into the cycle
• Cycles take two or three runs to finish

What Gets Fixed on a Clarksville Dryer Call

Keeping a Kenmore Dryer Running

• Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
• If the lint screen looks clogged when held to the light, scrub it with hot soapy water and a stiff brush and let it dry fully before reinstalling. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)

Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.

Budgeting for a Kenmore Dryer Repair

Price the repair before replacing a Kenmore dryer. Published ranges for common jobs:

• Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
• Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
• Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
• Typical dryer repair (most homeowners): $100–$430 Source: Angi - How Much Does Dryer Repair Cost?
• Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?

Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?

Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.

Getting Ready for the Repair

• Whether the dryer is gas or electric
• The brand, model and serial number from the label inside the door or on the back panel
• Any error code on the display

Local Notes for Clarksville

Most dryer calls in Clarksville come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.

Questions to Ask a Clarksville Technician

• Will you check the vent and lint path as part of the visit?
• If a part has to be ordered, how soon can you come back to finish?
• What is the service call or diagnostic fee, and is it applied to the repair?

Kenmore Dryer Repair FAQs: Clarksville, TN

More Laundry Repair in Clarksville, TN

More Kenmore Dryer Repair Pages Nearby

Write down any error code your Kenmore dryer shows and when it appears. It helps a Clarksville technician bring the right parts.