Most Kenmore dryer repairs in Cameron Park involve the same few systems: heat, airflow, the drum drive and the controls. Below are independent repair companies serving Cameron Park, with those that mention Kenmore first, then the nearest dryer repair companies.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by Kenmore. If your dryer is still under manufacturer coverage, contact Kenmore directly.
Kenmore appliances were sold through Sears for decades, so many owners look for Sears dryer repair. The companies here are independent technicians who work on Kenmore and Kenmore Elite dryers; they are not Sears.
Independent Kenmore Dryer Technicians, Cameron Park TX
We found 16 appliance repair companies within 30 miles of Cameron Park. Other nearby bases include Brownsville (8), Harlingen (7), and San Benito (1). Distances run up to about 23 miles. The closest is Sears Appliance Repair, about 2.0 miles away. None of the repair companies near Cameron Park name Kenmore in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. The 15 rated companies in range average 4.0 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Three nearest companies, miles away | 2.0, 3.0, 3.6 |
|---|---|
| Appliance repair companies in range (30 mi) | 16 |
| With 4.5+ stars and at least 10 reviews | 4 |
| List dryer or washer & dryer work | 3 |
| Listing Saturday hours | 7 |
| Mention Kenmore | 0 |
Closest matches for Cameron Park: My Repair Center (18.8 miles away, based in Harlingen, 4.7 stars from 1,639 reviews, lists Saturday hours); Plata Refrigeration & Appliance Center (4.0 miles away, based in Brownsville, 4.1 stars from 40 reviews, lists Saturday hours); Sears Appliance Repair (2.0 miles away, based in Brownsville, 4.4 stars from 135 reviews, lists Saturday hours); Ernesto's Appliance Repair & Service (19.7 miles away, based in Harlingen, 4.8 stars from 25 reviews, lists Saturday hours).
Know Your Kenmore Dryer
How Kenmore Dryers Are Built
On Kenmore Elite steam dryers, the display reports ductwork restriction in steps (d80, d90, d95) and a blinking CHECK VENT, which the guide says is an exhaust problem rather than a dryer failure. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Kenmore's compact condensing dryer needs no outside wall vent, runs on a 220V supply and offers manual-drain or direct-drain water removal. Source: Kenmore - 4.0 cu. ft. Front-Load Electric Condensing Dryer
What Kenmore Says to Check First
- Clothes wrinkled after drying. Kenmore says to remove clothes promptly, avoid overloading, and use Wrinkle Guard or a short touch-up cycle. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Check Vent light blinking. Kenmore says the exhaust is seriously restricted and the ducts should be cleaned and inspected before using the dryer again. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Dryer Codes Mean
| Code | What it means |
|---|---|
| PF / nP (Elite steam dryers) | A power supply or cord connection problem; check the cord at the terminal block and the house fuse or breaker. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| gAS (Elite steam dryers) | The gas supply is off on a gas model; open the house and dryer gas shutoffs. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| CL (Elite steam dryers) | Control Lock is on. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore smart washers and dryers can check diagnostics through the Kenmore Smart app or Alexa and send app notices about blocked filters and other machine issues. Source: Kenmore - Kenmore Elite 81782 Smart 7.4 cu. ft. Electric Dryer with Accela Steam
Signs Your Kenmore Dryer Needs a Technician
- Burning or hot smell during a cycle
- Clothes still damp after a full cycle
- Dryer shuts off a few minutes into the cycle
What a Dryer Repair Technician Checks
Owner Care for Kenmore Dryers
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
- If the lint screen looks clogged when held to the light, scrub it with hot soapy water and a stiff brush and let it dry fully before reinstalling. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Budgeting for a Kenmore Dryer Repair
Most Kenmore dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Typical dryer repair: $100–$200 Source: Fixr - How much does it cost to repair a dryer?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- The brand, model and serial number from the label inside the door or on the back panel
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- How long the vent run is and where it exits the house
Around Cameron Park
Most dryer calls in Cameron Park come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, §1301.053 (Texas State Board of Plumbing Examiners)
Gas piping counts as plumbing in Texas and requires a plumbing license, with an exemption for LP gas installers who hold a separate state LP gas license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, §§1301.002, 1301.055 (Texas State Board of Plumbing Examiners)
How to Choose a Dryer Technician Near Cameron Park
- What is the service call or diagnostic fee, and is it applied to the repair?
- Will you check the vent and lint path as part of the visit?
- Can you give a written estimate before ordering parts?
Kenmore Dryer Repair FAQs: Cameron Park, TX
What makes a dryer stop heating?
How do I find a technician who knows Kenmore dryers?
Why does my Kenmore dryer show an error code?
Should I repair or replace my Kenmore dryer?
Related Repair Pages for Cameron Park
Kenmore Dryer Repair Near Cameron Park
Write down any error code your Kenmore dryer shows and when it appears. It helps a Cameron Park technician bring the right parts.