Most Kenmore dryer repairs in Channelview involve the same few systems: heat, airflow, the drum drive and the controls. Below are independent repair companies serving Channelview, with those that mention Kenmore first, then the nearest dryer repair companies.
Washer and Dryer Repair is independent and not affiliated with Kenmore. Listed companies are independent technicians who repair Kenmore dryers and other brands.
Kenmore appliances were sold through Sears for decades, so many owners look for Sears dryer repair. The companies here are independent technicians who work on Kenmore and Kenmore Elite dryers; they are not Sears.
Independent Kenmore Dryer Technicians, Channelview TX
Our data shows 40 appliance repair companies inside a 30-mile radius of Channelview. 3 list an address in Channelview, and other nearby bases include Pasadena (15), Houston (10), and Baytown (6). The farthest listed company is about 14 miles out. Nearest on the list: United Appliance Repair, around 0.7 miles out. No company within 30 miles of Channelview names Kenmore in its listing, so the list adds matches from farther out and the closest appliance repair companies. The 33 rated companies in range average 4.6 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Mention Kenmore | 0 |
|---|---|
| Open on Saturdays (per listing) | 42 |
| Distance to the three closest (mi) | 0.7, 0.7, 1.0 |
| Rated 4.5 stars or higher (10+ reviews) | 20 |
| Appliance repair companies in range (30 mi) | 60 |
| Show laundry appliance work | 17 |
The leading options for Channelview are Sears Appliance Repair (28.0 miles away, based in Liberty, 4.7 stars from 126 reviews, lists Saturday hours); Sears Appliance Repair (28.1 miles away, based in Alvin, 4.4 stars from 84 reviews, lists Saturday hours); ️ Kenmore Appliance Repair Pros in Stafford, TX (28.8 miles away, based in Stafford, 4.9 stars from 12 reviews, lists Saturday hours); Mr. Appliance of Baytown (9.0 miles away, based in Baytown, 4.9 stars from 104 reviews, lists Saturday hours).
Kenmore Dryer Features Technicians Work On
How Kenmore Dryers Are Built
On Kenmore Elite steam dryers, the display reports ductwork restriction in steps (d80, d90, d95) and a blinking CHECK VENT, which the guide says is an exhaust problem rather than a dryer failure. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Kenmore Dryer Symptoms and First Checks
- Clothes wrinkled after drying. Kenmore says to remove clothes promptly, avoid overloading, and use Wrinkle Guard or a short touch-up cycle. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Check Vent light blinking. Kenmore says the exhaust is seriously restricted and the ducts should be cleaned and inspected before using the dryer again. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Reading a Kenmore Dryer Error Code
| Code | What it means |
|---|---|
| HS (Elite steam dryers) | The humidity (moisture) sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| tE1-tE7 (Elite steam dryers) | A temperature sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| CHECK FILTER (Elite steam dryers) | A reminder to clean the lint filter before the load. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore Dryer Problems Worth a Service Call
- Clothes still damp after a full cycle
- Drum will not turn even though you hear a hum
- Outside of the cabinet gets unusually hot
What a Dryer Repair Technician Checks
Owner Care for Kenmore Dryers
- If the lint screen looks clogged when held to the light, scrub it with hot soapy water and a stiff brush and let it dry fully before reinstalling. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Kenmore Dryer Repair Cost Ranges
Most Kenmore dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- Any error code on the display
- How long the vent run is and where it exits the house
- The brand, model and serial number from the label inside the door or on the back panel
What Channelview Owners Should Know
Most dryer calls in Channelview come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, §1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Questions to Ask a Channelview Technician
- If a part has to be ordered, how soon can you come back to finish?
- What is the service call or diagnostic fee, and is it applied to the repair?
- What guarantee do you give on parts and labor?
Kenmore Dryer Repair FAQs: Channelview, TX
What should I do about a Kenmore error code?
Why does my dryer take so long to dry?
Which Channelview technicians work on Kenmore?
More Laundry Repair in Channelview, TX
More Kenmore Dryer Repair Pages Nearby
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a Kenmore repair.