Most Kenmore dryer repairs in Rusk involve the same few systems: heat, airflow, the drum drive and the controls. We flag companies whose listing or website mentions Kenmore and fill in with nearby dryer repair companies so you always have options.
This is an independent directory. We are not affiliated with Kenmore, and the technicians listed are independent repair companies, not the manufacturer.
Kenmore appliances were sold through Sears for decades, so many owners look for Sears dryer repair. The companies here are independent technicians who work on Kenmore and Kenmore Elite dryers; they are not Sears.
Independent Kenmore Dryer Technicians, Rusk TX
34 repair companies serve Rusk from within 60 miles. Other nearby bases include Tyler (8), Longview (5), and Lufkin (4). The farthest listed company is about 59 miles out. No company within 60 miles of Rusk names Kenmore in its listing, so the list adds matches from farther out and the closest appliance repair companies. Nearest on the list: Sears Appliance Repair, around 12.3 miles out. Rated companies nearby average 4.2 stars across 32 businesses. Rusk is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Companies are shown by relevance and distance from Rusk. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Rated 4.5 stars or higher (10+ reviews) | 16 |
|---|---|
| Listing Saturday hours | 15 |
| Distance to the three closest (mi) | 12.3, 12.5, 14.9 |
| Appliance repair companies in range (60 mi) | 34 |
| Mention Kenmore | 0 |
| List dryer or washer & dryer work | 10 |
The leading options for Rusk are Sears Appliance Repair (69.3 miles away, based in Marshall, 4.3 stars from 77 reviews, lists Saturday hours); Mr. Appliance of East Texas (37.0 miles away, based in Tyler, 4.7 stars from 1,263 reviews); Sears Appliance Repair (27.2 miles away, based in Palestine, 4.5 stars from 139 reviews, lists Saturday hours); Sears Appliance Repair (12.3 miles away, based in Jacksonville, 3.8 stars from 80 reviews, lists Saturday hours).
Know Your Kenmore Dryer
What Makes Kenmore Dryer Repairs Different
Accela Steam dryers connect directly to the household water supply, so the inlet hose and water pressure (20 to 120 psi) become part of a steam-dryer service check. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Kenmore Dryer Symptoms and First Checks
- Dryer won't start. Kenmore says to confirm the cord is fully plugged into a grounded outlet and the breaker is intact, and to turn off Control Lock if buttons beep but nothing happens. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer not heating. Kenmore says to check for a tripped breaker or blown fuse and, on gas models, confirm the gas supply is on, noting an electric dryer can tumble without heat on a partial circuit. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Dryer Codes Mean
| Code | What it means |
|---|---|
| gAS (Elite steam dryers) | The gas supply is off on a gas model; open the house and dryer gas shutoffs. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| tE1-tE7 (Elite steam dryers) | A temperature sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| d80 / d90 / d95 (Elite steam dryers) | The exhaust ductwork is roughly 80, 90 or 95 percent blocked; stop using the dryer until the vent is cleaned or repaired. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore smart washers and dryers can check diagnostics through the Kenmore Smart app or Alexa and send app notices about blocked filters and other machine issues. Source: Kenmore - Kenmore Elite 81782 Smart 7.4 cu. ft. Electric Dryer with Accela Steam
When to Call for Kenmore Dryer Repair
- Burning or hot smell during a cycle
- Cycles take two or three runs to finish
- Drum turns but the air stays cool
Inside a Dryer Repair Visit
Care Kenmore Recommends for Its Dryers
- If the lint screen looks clogged when held to the light, scrub it with hot soapy water and a stiff brush and let it dry fully before reinstalling. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Kenmore Dryer Repair Cost Ranges
A Kenmore dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- Any error code on the display
- The brand, model and serial number from the label inside the door or on the back panel
- How long the vent run is and where it exits the house
Around Rusk
Most dryer calls in Rusk come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, §1301.053 (Texas State Board of Plumbing Examiners)
Gas piping counts as plumbing in Texas and requires a plumbing license, with an exemption for LP gas installers who hold a separate state LP gas license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, §§1301.002, 1301.055 (Texas State Board of Plumbing Examiners)
Questions to Ask a Rusk Technician
- Can you give a written estimate before ordering parts?
- Will you check the vent and lint path as part of the visit?
- Do you work on gas dryers, and who handles anything involving the gas line?
Kenmore Dryer Repair FAQs: Rusk, TX
How do I find a technician who knows Kenmore dryers?
Is this Kenmore customer service?
What makes a dryer stop heating?
Why does my dryer take so long to dry?
Other Dryer Repair in Rusk
Kenmore Dryer Repair in Nearby Cities
Write down any error code your Kenmore dryer shows and when it appears. It helps a Rusk technician bring the right parts.